@@ -29,10 +29,12 @@ config MIPS
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_WANT_LD_ORPHAN_WARN
select BUILDTIME_TABLE_SORT
+ select BUILTIN_DTB_ALL if BUILTIN_DTB
select CLONE_BACKWARDS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE || SUSPEND
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_BUILTIN_DTB if BUILTIN_DTB
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
@@ -423,9 +423,6 @@ endif
CLEAN_FILES += vmlinux.32 vmlinux.64
-# device-trees
-core-y += arch/mips/boot/dts/
-
archprepare:
ifdef CONFIG_MIPS32_N32
@$(kecho) ' Checking missing-syscalls for N32'
@@ -16,5 +16,3 @@ subdir-$(CONFIG_ATH79) += qca
subdir-$(CONFIG_RALINK) += ralink
subdir-$(CONFIG_MACH_REALTEK_RTL) += realtek
subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += xilfpga
-
-obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
@@ -33,5 +33,3 @@ dtb-$(CONFIG_DT_NONE) += \
bcm97420c.dtb \
bcm97425svmb.dtb \
bcm97435svmb.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -1,4 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -5,5 +5,3 @@ dtb-$(CONFIG_JZ4770_GCW0) += gcw0.dtb
dtb-$(CONFIG_JZ4780_CI20) += ci20.dtb
dtb-$(CONFIG_X1000_CU1000_NEO) += cu1000-neo.dtb
dtb-$(CONFIG_X1830_CU1830_NEO) += cu1830-neo.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -1,4 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_DT_EASY50712) += danube_easy50712.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -5,5 +5,3 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_4core_rs780e.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -8,6 +8,3 @@ dtb-$(CONFIG_SOC_VCOREIII) += \
ocelot_pcb123.dtb \
serval_pcb105.dtb \
serval_pcb106.dtb
-
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -1,5 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
dtb-$(CONFIG_LEGACY_BOARD_SEAD3) += sead3.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -3,5 +3,3 @@ dtb-$(CONFIG_DTB_PIC32_MZDA_SK) += pic32mzda_sk.dtb
dtb-$(CONFIG_DTB_PIC32_NONE) += \
pic32mzda_sk.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -10,5 +10,3 @@ dtb-$(CONFIG_SOC_MT7621) += \
mt7621-gnubee-gb-pc1.dtb \
mt7621-gnubee-gb-pc2.dtb \
mt7621-tplink-hc220-g5-v1.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot DTBs") introduced generic support for built-in DTBs. Select GENERIC_BUILTIN_DTB and BUILTIN_DTB_ALL when the built-in DTB support is enabled. DTBs compiled under arch/mips/boot/dts/ will be wrapped by the generic rule in scripts/Makefile.vmlinux. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- arch/mips/Kconfig | 2 ++ arch/mips/Makefile | 3 --- arch/mips/boot/dts/Makefile | 2 -- arch/mips/boot/dts/brcm/Makefile | 2 -- arch/mips/boot/dts/cavium-octeon/Makefile | 2 -- arch/mips/boot/dts/ingenic/Makefile | 2 -- arch/mips/boot/dts/lantiq/Makefile | 2 -- arch/mips/boot/dts/loongson/Makefile | 2 -- arch/mips/boot/dts/mscc/Makefile | 3 --- arch/mips/boot/dts/mti/Makefile | 2 -- arch/mips/boot/dts/pic32/Makefile | 2 -- arch/mips/boot/dts/ralink/Makefile | 2 -- 12 files changed, 2 insertions(+), 24 deletions(-)