@@ -46,6 +46,14 @@ soc@18000000 {
#size-cells = <1>;
ranges = <0x0 0x18000000 0x10000>;
+ spi0: spi@1200 {
+ compatible = "realtek,rtl8380-spi";
+ reg = <0x1200 0x100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
uart0: serial@2000 {
compatible = "ns16550a";
reg = <0x2000 0x100>;
@@ -89,5 +97,33 @@ intc: interrupt-controller@3000 {
interrupt-parent = <&cpuintc>;
interrupts = <2>, <3>, <4>, <5>, <6>;
};
+
+ watchdog: watchdog@3150 {
+ compatible = "realtek,rtl8380-wdt";
+ reg = <0x3150 0xc>;
+
+ realtek,reset-mode = "soc";
+
+ clocks = <&lx_clk>;
+ timeout-sec = <20>;
+
+ interrupt-parent = <&intc>;
+ interrupt-names = "phase1", "phase2";
+ interrupts = <19>, <18>;
+ };
+
+ gpio0: gpio@3500 {
+ compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+ reg = <0x3500 0x1c>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <24>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <23>;
+ };
};
};
Add some of the SoC's CPU peripherals currently supported: - GPIO controller with support for 24 GPIO lines, although not all lines are brought out to pads on the SoC package. These lines can generate interrupts from external sources. - Watchdog which can be used to restart the SoC if no external restart logic is present. - SPI controller, primarily used to access NOR flash Signed-off-by: Sander Vanheule <sander@svanheule.net> --- arch/mips/boot/dts/realtek/rtl838x.dtsi | 36 +++++++++++++++++++++++++ 1 file changed, 36 insertions(+)