@@ -73,6 +73,14 @@ config DW_APB_TIMER_OF
select DW_APB_TIMER
select TIMER_OF
+config ECONET_EN751221_TIMER
+ bool "EcoNet EN751221 High Precision Timer" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Support for CPU timer found on EcoNet MIPS based SoCs.
+
config FTTMR010_TIMER
bool "Faraday Technology timer driver" if COMPILE_TEST
depends on HAS_IOMEM
@@ -17,6 +17,7 @@ obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DAVINCI_TIMER) += timer-davinci.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
+obj-$(CONFIG_ECONET_EN751221_TIMER) += timer-econet-en751221.o
obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o
obj-$(CONFIG_OMAP_DM_SYSTIMER) += timer-ti-dm-systimer.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
new file mode 100644
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Timer present on EcoNet EN75xx MIPS based SoCs.
+ *
+ * Copyright (C) 2025 by Caleb James DeLisle <cjd@cjdns.fr>
+ */
+
+#include <linux/io.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/cpuhotplug.h>
+#include <linux/clk.h>
+
+#define ECONET_BITS 32
+#define ECONET_MIN_DELTA 0x00001000
+#define ECONET_MAX_DELTA GENMASK(ECONET_BITS - 2, 0)
+/* 34Kc hardware has 1 block and 1004Kc has 2. */
+#define ECONET_NUM_BLOCKS DIV_ROUND_UP(NR_CPUS, 2)
+
+static struct {
+ void __iomem *membase[ECONET_NUM_BLOCKS];
+ u32 freq_hz;
+} econet_timer __ro_after_init;
+
+static DEFINE_PER_CPU(struct clock_event_device, econet_timer_pcpu);
+
+/* Each memory block has 2 timers, the order of registers is:
+ * CTL, CMR0, CNT0, CMR1, CNT1
+ */
+static inline void __iomem *reg_ctl(u32 timer_n)
+{
+ return econet_timer.membase[timer_n >> 1];
+}
+
+static inline void __iomem *reg_compare(u32 timer_n)
+{
+ return econet_timer.membase[timer_n >> 1] + (timer_n & 1) * 0x08 + 0x04;
+}
+
+static inline void __iomem *reg_count(u32 timer_n)
+{
+ return econet_timer.membase[timer_n >> 1] + (timer_n & 1) * 0x08 + 0x08;
+}
+
+static inline u32 ctl_bit_enabled(u32 timer_n)
+{
+ return 1U << (timer_n & 1);
+}
+
+static inline u32 ctl_bit_pending(u32 timer_n)
+{
+ return 1U << ((timer_n & 1) + 16);
+}
+
+static bool cevt_is_pending(int cpu_id)
+{
+ return ioread32(reg_ctl(cpu_id)) & ctl_bit_pending(cpu_id);
+}
+
+static irqreturn_t cevt_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *dev = this_cpu_ptr(&econet_timer_pcpu);
+ int cpu = cpumask_first(dev->cpumask);
+
+ if (!cevt_is_pending(cpu)) {
+ pr_debug("%s IRQ %d on CPU %d is not pending\n", __func__, irq, cpu);
+ return IRQ_NONE;
+ }
+
+ iowrite32(ioread32(reg_count(cpu)), reg_compare(cpu));
+ dev->event_handler(dev);
+ return IRQ_HANDLED;
+}
+
+static int cevt_set_next_event(ulong delta, struct clock_event_device *dev)
+{
+ u32 next;
+ int cpu;
+
+ cpu = cpumask_first(dev->cpumask);
+ next = ioread32(reg_count(cpu)) + delta;
+ iowrite32(next, reg_compare(cpu));
+
+ if ((s32)(next - ioread32(reg_count(cpu))) < ECONET_MIN_DELTA / 2)
+ return -ETIME;
+
+ return 0;
+}
+
+static int cevt_init_cpu(uint cpu)
+{
+ struct clock_event_device *cd = &per_cpu(econet_timer_pcpu, cpu);
+ u32 reg;
+
+ pr_info("%s: Setting up clockevent for CPU %d\n", cd->name, cpu);
+
+ reg = ioread32(reg_ctl(cpu)) | ctl_bit_enabled(cpu);
+ iowrite32(reg, reg_ctl(cpu));
+
+ enable_percpu_irq(cd->irq, IRQ_TYPE_NONE);
+
+ /* Do this last because it synchronously configures the timer */
+ clockevents_config_and_register(
+ cd, econet_timer.freq_hz,
+ ECONET_MIN_DELTA, ECONET_MAX_DELTA);
+
+ return 0;
+}
+
+static u64 notrace sched_clock_read(void)
+{
+ /* Always read from clock zero no matter the CPU */
+ return (u64)ioread32(reg_count(0));
+}
+
+/* Init */
+
+static void __init cevt_dev_init(uint cpu)
+{
+ iowrite32(0, reg_count(cpu));
+ iowrite32(U32_MAX, reg_compare(cpu));
+}
+
+static int __init cevt_init(struct device_node *np)
+{
+ int i, irq, ret;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("%pOFn: irq_of_parse_and_map failed", np);
+ return -EINVAL;
+ }
+
+ ret = request_percpu_irq(irq, cevt_interrupt, np->name, &econet_timer_pcpu);
+
+ if (ret < 0) {
+ pr_err("%pOFn: IRQ %d setup failed (%d)\n", np, irq, ret);
+ goto err_unmap_irq;
+ }
+
+ for_each_possible_cpu(i) {
+ struct clock_event_device *cd = &per_cpu(econet_timer_pcpu, i);
+
+ cd->rating = 310,
+ cd->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_C3STOP |
+ CLOCK_EVT_FEAT_PERCPU;
+ cd->set_next_event = cevt_set_next_event;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of(i);
+ cd->name = np->name;
+
+ cevt_dev_init(i);
+ }
+
+ cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING,
+ "clockevents/en75/timer:starting",
+ cevt_init_cpu, NULL);
+ return 0;
+
+err_unmap_irq:
+ irq_dispose_mapping(irq);
+ return ret;
+}
+
+static int __init timer_init(struct device_node *np)
+{
+ int num_blocks = DIV_ROUND_UP(num_possible_cpus(), 2);
+ struct clk *clk;
+ int ret;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("%pOFn: Failed to get CPU clock from DT %ld\n", np, PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ econet_timer.freq_hz = clk_get_rate(clk);
+
+ for (int i = 0; i < num_blocks; i++) {
+ econet_timer.membase[i] = of_iomap(np, i);
+ if (!econet_timer.membase[i]) {
+ pr_err("%pOFn: failed to map register [%d]\n", np, i);
+ return -ENXIO;
+ }
+ }
+
+ /* For clocksource purposes always read clock zero, whatever the CPU */
+ ret = clocksource_mmio_init(reg_count(0), np->name,
+ econet_timer.freq_hz, 301, ECONET_BITS,
+ clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("%pOFn: clocksource_mmio_init failed: %d", np, ret);
+ return ret;
+ }
+
+ ret = cevt_init(np);
+ if (ret < 0)
+ return ret;
+
+ sched_clock_register(sched_clock_read, ECONET_BITS,
+ econet_timer.freq_hz);
+
+ pr_info("%pOFn: using %u.%03u MHz high precision timer\n", np,
+ econet_timer.freq_hz / 1000000,
+ (econet_timer.freq_hz / 1000) % 1000);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(econet_timer_hpt, "econet,en751221-timer", timer_init);
Introduce a clocksource driver for the so-called high-precision timer (HPT) in the EcoNet EN751221 MIPS SoC. Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr> --- The timer is named in alignment with the DT compatible. The name "HPT" is included because it is commonly used in vendor and 3rd party out-of-tree sources. --- drivers/clocksource/Kconfig | 8 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-econet-en751221.c | 216 ++++++++++++++++++++ 3 files changed, 225 insertions(+) create mode 100644 drivers/clocksource/timer-econet-en751221.c