@@ -149,6 +149,7 @@ implementation.
ia64/index
m68k/index
powerpc/index
+ mips/index
openrisc/index
parisc/index
riscv/index
similarity index 67%
rename from Documentation/mips/AU1xxx_IDE.README
rename to Documentation/mips/au1xxx_ide.rst
@@ -1,7 +1,14 @@
-README for MIPS AU1XXX IDE driver - Released 2005-07-15
+.. include:: <isonum.txt>
+
+======================
+MIPS AU1XXX IDE driver
+======================
+
+Released 2005-07-15
+
+About
+=====
-ABOUT
------
This file describes the 'drivers/ide/au1xxx-ide.c', related files and the
services they provide.
@@ -10,17 +17,17 @@ the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
section.
-LICENSE
--------
+License
+=======
-Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+:Copyright: |copy| 2003-2005 AMD, Personal Connectivity Solutions
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.
-THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+THIS SOFTWARE IS PROVIDED ``AS IS`` AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
@@ -35,31 +42,35 @@ You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
675 Mass Ave, Cambridge, MA 02139, USA.
-Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+Note:
+ for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
Interface and Linux Device Driver" Application Note.
-FILES, CONFIGS AND COMPATIBILITY
---------------------------------
+Files, Configs and Compatibility
+================================
Two files are introduced:
a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
contains : struct _auide_hwif
- timing parameters for PIO mode 0/1/2/3/4
- timing parameters for MWDMA 0/1/2
+
+ - timing parameters for PIO mode 0/1/2/3/4
+ - timing parameters for MWDMA 0/1/2
b) 'drivers/ide/mips/au1xxx-ide.c'
contains the functionality of the AU1XXX IDE driver
Following extra configs variables are introduced:
- CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
- CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ - enable the PIO+DBDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ - enable the MWDMA mode
-SUPPORTED IDE MODES
--------------------
+Supported IDE Modes
+===================
The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
@@ -69,20 +80,21 @@ To change the PIO mode use the program hdparm with option -p, e.g.
-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
-PERFORMANCE CONFIGURATIONS
---------------------------
+Performance Configurations
+==========================
-If the used system doesn't need USB support enable the following kernel configs:
+If the used system doesn't need USB support enable the following kernel
+configs::
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_IDE_AU1XXX=y
-CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDEDMA=y
+ CONFIG_IDE=y
+ CONFIG_BLK_DEV_IDE=y
+ CONFIG_IDE_GENERIC=y
+ CONFIG_BLK_DEV_IDEPCI=y
+ CONFIG_BLK_DEV_GENERIC=y
+ CONFIG_BLK_DEV_IDEDMA_PCI=y
+ CONFIG_BLK_DEV_IDE_AU1XXX=y
+ CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+ CONFIG_BLK_DEV_IDEDMA=y
Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
the burst support on DBDMA controller.
@@ -90,20 +102,22 @@ the burst support on DBDMA controller.
If the used system need the USB support enable the following kernel configs for
high IDE to USB throughput.
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_IDE_AU1XXX=y
-CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDEDMA=y
+::
+
+ CONFIG_IDE_GENERIC=y
+ CONFIG_BLK_DEV_IDEPCI=y
+ CONFIG_BLK_DEV_GENERIC=y
+ CONFIG_BLK_DEV_IDEDMA_PCI=y
+ CONFIG_BLK_DEV_IDE_AU1XXX=y
+ CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+ CONFIG_BLK_DEV_IDEDMA=y
Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
disable the burst support on DBDMA controller.
-ACKNOWLEDGMENTS
----------------
+Acknowledgments
+===============
These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
IDE driver from AMD.
@@ -112,4 +126,5 @@ Additional input also from:
Matthias Lenk <matthias.lenk@amd.com>
Happy hacking!
+
Enrico Walther <enrico.walther@amd.com>
new file mode 100644
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+MIPS architecture
+=================
+
+.. toctree::
+ :maxdepth: 2
+
+ au1xxx_ide
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`