| Message ID | ac147196cd7744a7d50cf25197fe08bf9e81f88a.1638470392.git.hns@goldelico.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | MIPS: JZ4780 and CI20 HDMI | expand |
On Thu, Dec 02, 2021 at 07:39:48PM +0100, H. Nikolaus Schaller wrote: > From: Sam Ravnborg <sam@ravnborg.org> > > Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC. > Based on .txt binding from Zubair Lutfullah Kakakhel > > We also add generic ddc-i2c-bus to synopsys,dw-hdmi.yaml > > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> > Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> > Cc: Rob Herring <robh@kernel.org> > Cc: devicetree@vger.kernel.org > --- > .../display/bridge/ingenic,jz4780-hdmi.yaml | 78 +++++++++++++++++++ > .../display/bridge/synopsys,dw-hdmi.yaml | 3 + > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml > new file mode 100644 > index 0000000000000..49ae1130efded > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml > @@ -0,0 +1,78 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Bindings for Ingenic JZ4780 HDMI Transmitter > + > +maintainers: > + - H. Nikolaus Schaller <hns@goldelico.com> > + > +description: | > + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4 > + TX controller IP with accompanying PHY IP. > + > +allOf: > + - $ref: synopsys,dw-hdmi.yaml# > + > +properties: > + compatible: > + const: ingenic,jz4780-dw-hdmi > + > + reg-io-width: > + const: 4 > + > + clocks: > + maxItems: 2 > + > + hdmi-5v-supply: > + description: regulator to provide +5V at the connector Being part of the connector, that belongs in a connector node. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports You need to define what each 'port' node is. > + > +required: > + - compatible > + - clocks > + - clock-names > + - hdmi-5v-supply > + - ports > + - reg-io-width > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> > + > + hdmi: hdmi@10180000 { > + compatible = "ingenic,jz4780-dw-hdmi"; > + reg = <0x10180000 0x8000>; > + reg-io-width = <4>; > + ddc-i2c-bus = <&i2c4>; > + interrupt-parent = <&intc>; > + interrupts = <3>; > + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; > + clock-names = "iahb", "isfr"; > + hdmi-5v-supply = <&hdmi_power>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + hdmi_in: port@0 { > + reg = <0>; > + dw_hdmi_in: endpoint { > + remote-endpoint = <&jz4780_lcd_out>; > + }; > + }; > + hdmi_out: port@1 { > + reg = <1>; > + dw_hdmi_out: endpoint { > + remote-endpoint = <&hdmi_con>; > + }; > + }; > + }; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml > index 9be44a682e67a..9cbeabaee0968 100644 > --- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml > @@ -50,6 +50,9 @@ properties: > interrupts: > maxItems: 1 > > + ddc-i2c-bus: > + description: An I2C interface if the internal DDC I2C driver is not to be used That too is already defined to be part of the connector node. > + > additionalProperties: true > > ... > -- > 2.33.0 > >
Hi Nikolaus, Le ven., déc. 10 2021 at 10:53:18 -0600, Rob Herring <robh@kernel.org> a écrit : > On Thu, Dec 02, 2021 at 07:39:48PM +0100, H. Nikolaus Schaller wrote: >> From: Sam Ravnborg <sam@ravnborg.org> >> >> Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC. >> Based on .txt binding from Zubair Lutfullah Kakakhel >> >> We also add generic ddc-i2c-bus to synopsys,dw-hdmi.yaml >> >> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> >> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> >> Cc: Rob Herring <robh@kernel.org> >> Cc: devicetree@vger.kernel.org >> --- >> .../display/bridge/ingenic,jz4780-hdmi.yaml | 78 >> +++++++++++++++++++ >> .../display/bridge/synopsys,dw-hdmi.yaml | 3 + >> 2 files changed, 81 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml >> b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml >> new file mode 100644 >> index 0000000000000..49ae1130efded >> --- /dev/null >> +++ >> b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml >> @@ -0,0 +1,78 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: >> http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Bindings for Ingenic JZ4780 HDMI Transmitter >> + >> +maintainers: >> + - H. Nikolaus Schaller <hns@goldelico.com> >> + >> +description: | >> + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys >> DesignWare HDMI 1.4 >> + TX controller IP with accompanying PHY IP. >> + >> +allOf: >> + - $ref: synopsys,dw-hdmi.yaml# >> + >> +properties: >> + compatible: >> + const: ingenic,jz4780-dw-hdmi >> + >> + reg-io-width: >> + const: 4 >> + >> + clocks: >> + maxItems: 2 >> + >> + hdmi-5v-supply: >> + description: regulator to provide +5V at the connector > > Being part of the connector, that belongs in a connector node. I believe that means adding .atomic_{enable,disable} callbacks to the display-connector bridge (drivers/gpu/drm/bridge/display-connector.c) which would enable/disable the regulator. Unless it messes up with e.g. cable detection (which I believe requires the regulator to be enabled), in that case unconditionally enable it in the connector's probe function. >> + >> + ports: >> + $ref: /schemas/graph.yaml#/properties/ports > > You need to define what each 'port' node is. Have a look at Documentation/devicetree/bindings/display/ingenic,lcd.yaml for an example on how to do this. >> + >> +required: >> + - compatible >> + - clocks >> + - clock-names >> + - hdmi-5v-supply >> + - ports >> + - reg-io-width >> + >> +unevaluatedProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> >> + >> + hdmi: hdmi@10180000 { >> + compatible = "ingenic,jz4780-dw-hdmi"; >> + reg = <0x10180000 0x8000>; >> + reg-io-width = <4>; >> + ddc-i2c-bus = <&i2c4>; >> + interrupt-parent = <&intc>; >> + interrupts = <3>; >> + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; >> + clock-names = "iahb", "isfr"; >> + hdmi-5v-supply = <&hdmi_power>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + hdmi_in: port@0 { >> + reg = <0>; >> + dw_hdmi_in: endpoint { >> + remote-endpoint = <&jz4780_lcd_out>; >> + }; >> + }; >> + hdmi_out: port@1 { >> + reg = <1>; >> + dw_hdmi_out: endpoint { >> + remote-endpoint = <&hdmi_con>; >> + }; >> + }; >> + }; >> + }; >> + >> +... >> diff --git >> a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml >> b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml >> index 9be44a682e67a..9cbeabaee0968 100644 >> --- >> a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml >> +++ >> b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml >> @@ -50,6 +50,9 @@ properties: >> interrupts: >> maxItems: 1 >> >> + ddc-i2c-bus: >> + description: An I2C interface if the internal DDC I2C driver >> is not to be used > > That too is already defined to be part of the connector node. Just remove the property then, since you don't use it in the ci20 bindings. Cheers, -Paul >> + >> additionalProperties: true >> >> ... >> -- >> 2.33.0 >> >>
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml new file mode 100644 index 0000000000000..49ae1130efded --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Ingenic JZ4780 HDMI Transmitter + +maintainers: + - H. Nikolaus Schaller <hns@goldelico.com> + +description: | + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4 + TX controller IP with accompanying PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + const: ingenic,jz4780-dw-hdmi + + reg-io-width: + const: 4 + + clocks: + maxItems: 2 + + hdmi-5v-supply: + description: regulator to provide +5V at the connector + + ports: + $ref: /schemas/graph.yaml#/properties/ports + +required: + - compatible + - clocks + - clock-names + - hdmi-5v-supply + - ports + - reg-io-width + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> + + hdmi: hdmi@10180000 { + compatible = "ingenic,jz4780-dw-hdmi"; + reg = <0x10180000 0x8000>; + reg-io-width = <4>; + ddc-i2c-bus = <&i2c4>; + interrupt-parent = <&intc>; + interrupts = <3>; + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; + clock-names = "iahb", "isfr"; + hdmi-5v-supply = <&hdmi_power>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&jz4780_lcd_out>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml index 9be44a682e67a..9cbeabaee0968 100644 --- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -50,6 +50,9 @@ properties: interrupts: maxItems: 1 + ddc-i2c-bus: + description: An I2C interface if the internal DDC I2C driver is not to be used + additionalProperties: true ...