diff mbox series

[5/5] MIPS: Malta: Enable magic multipliers for Super I/O UARTs

Message ID alpine.DEB.2.21.2105182249380.3032@angie.orcam.me.uk (mailing list archive)
State Not Applicable
Headers show
Series serial, Malta: Fixes to magic multipliers for SMSC Super I/O UARTs | expand

Commit Message

Maciej W. Rozycki June 10, 2021, 6:38 p.m. UTC 
The SMSC FDC37M817 Super I/O chip has a configuration feature that lets 
it support special UART divisor values of 32770 and 32769 for bit rates 
of 230400 and 460800 bits per second respectively.  Our 8250 driver core 
provides support for these special divisors via the UPF_MAGIC_MULTIPLIER 
flag, and YAMON firmware unconditionally configures the Super I/O chip 
with these divisors enabled as well, so all we need to do in platform 
setup for these bit rates to work is to set the flag.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
 arch/mips/mti-malta/malta-platform.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

linux-mips-malta-smsc-uart-magic-multiplier.diff
diff mbox series

Patch

Index: linux-malta-cbus-uart/arch/mips/mti-malta/malta-platform.c
===================================================================
--- linux-malta-cbus-uart.orig/arch/mips/mti-malta/malta-platform.c
+++ linux-malta-cbus-uart/arch/mips/mti-malta/malta-platform.c
@@ -33,7 +33,8 @@ 
 	.irq		= int,						\
 	.uartclk	= 1843200,					\
 	.iotype		= UPIO_PORT,					\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,		\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |		\
+			  UPF_MAGIC_MULTIPLIER,				\
 	.regshift	= 0,						\
 }