diff mbox series

[08/18] arch: mips: Remove CONFIG_OPROFILE support

Message ID fb0d4283098cd4d1724752534a30ce9689a08783.1610622251.git.viresh.kumar@linaro.org (mailing list archive)
State Accepted
Headers show
Series None | expand

Commit Message

Viresh Kumar Jan. 14, 2021, 11:35 a.m. UTC
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

Remove the old oprofile's architecture specific support.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/mips/Kconfig                             |   3 +-
 arch/mips/Makefile                            |   1 -
 arch/mips/configs/fuloong2e_defconfig         |   1 -
 arch/mips/configs/ip32_defconfig              |   1 -
 arch/mips/configs/lemote2f_defconfig          |   1 -
 arch/mips/configs/mtx1_defconfig              |   1 -
 arch/mips/configs/rs90_defconfig              |   1 -
 .../include/asm/mach-loongson2ef/loongson.h   |   9 -
 arch/mips/loongson2ef/fuloong-2e/irq.c        |   2 +-
 arch/mips/loongson2ef/lemote-2f/irq.c         |   1 -
 arch/mips/oprofile/Makefile                   |  18 -
 arch/mips/oprofile/backtrace.c                | 177 -------
 arch/mips/oprofile/common.c                   | 147 ------
 arch/mips/oprofile/op_impl.h                  |  41 --
 arch/mips/oprofile/op_model_loongson2.c       | 161 ------
 arch/mips/oprofile/op_model_loongson3.c       | 213 --------
 arch/mips/oprofile/op_model_mipsxx.c          | 479 ------------------
 17 files changed, 2 insertions(+), 1255 deletions(-)
 delete mode 100644 arch/mips/oprofile/Makefile
 delete mode 100644 arch/mips/oprofile/backtrace.c
 delete mode 100644 arch/mips/oprofile/common.c
 delete mode 100644 arch/mips/oprofile/op_impl.h
 delete mode 100644 arch/mips/oprofile/op_model_loongson2.c
 delete mode 100644 arch/mips/oprofile/op_model_loongson3.c
 delete mode 100644 arch/mips/oprofile/op_model_mipsxx.c
diff mbox series

Patch

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a17bedf4f0d..54df2fd9988a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -74,7 +74,6 @@  config MIPS
 	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
@@ -2844,7 +2843,7 @@  config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
+	depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index cd4343edeb11..f62a6d951d3c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -316,7 +316,6 @@  libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/
 core-y += arch/mips/
 
 drivers-y			+= arch/mips/crypto/
-drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
 # suspend and hibernation support
 drivers-$(CONFIG_PM)	+= arch/mips/power/
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 023b4e644b1c..5c24ac7fdf56 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -22,7 +22,6 @@  CONFIG_MIPS32_N32=y
 # CONFIG_SUSPEND is not set
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/sda3"
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 7b1fab518317..1ae48f7d9ddd 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -14,7 +14,6 @@  CONFIG_SGI_IP32=y
 CONFIG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 688c91918db2..aaf9d5e0aa2c 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -21,7 +21,6 @@  CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/hda3"
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bbe0f39f8088..205d3b34528c 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -17,7 +17,6 @@  CONFIG_PCCARD=m
 CONFIG_YENTA=m
 CONFIG_PD6729=m
 CONFIG_I82092=m
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/mips/configs/rs90_defconfig b/arch/mips/configs/rs90_defconfig
index 4f540bb94628..7ce3b814fdc8 100644
--- a/arch/mips/configs/rs90_defconfig
+++ b/arch/mips/configs/rs90_defconfig
@@ -30,7 +30,6 @@  CONFIG_PM=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPUFREQ_DT=y
-CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
 # CONFIG_STACKPROTECTOR is not set
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h
index 57e571128489..ca039b8dcde3 100644
--- a/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -56,15 +56,6 @@  extern int mach_i8259_irq(void);
 	(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
 
 #define LOONGSON_IRQ_BASE	32
-#define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
-
-#include <linux/interrupt.h>
-static inline void do_perfcnt_IRQ(void)
-{
-#if IS_ENABLED(CONFIG_OPROFILE)
-	do_IRQ(LOONGSON2_PERFCNT_IRQ);
-#endif
-}
 
 #define LOONGSON_FLASH_BASE	0x1c000000
 #define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
diff --git a/arch/mips/loongson2ef/fuloong-2e/irq.c b/arch/mips/loongson2ef/fuloong-2e/irq.c
index 305aa2eb74ad..b1c9d4ee0335 100644
--- a/arch/mips/loongson2ef/fuloong-2e/irq.c
+++ b/arch/mips/loongson2ef/fuloong-2e/irq.c
@@ -26,7 +26,7 @@  asmlinkage void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
-		do_perfcnt_IRQ();
+		return;
 	else if (pending & CAUSEF_IP5)
 		i8259_irqdispatch();
 	else if (pending & CAUSEF_IP2)
diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
index 6f00579971a3..f5a731a2a35f 100644
--- a/arch/mips/loongson2ef/lemote-2f/irq.c
+++ b/arch/mips/loongson2ef/lemote-2f/irq.c
@@ -75,7 +75,6 @@  void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(LOONGSON_TIMER_IRQ);
 	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-		do_perfcnt_IRQ();
 		bonito_irqdispatch();
 	} else if (pending & CAUSEF_IP3)	/* CPU UART */
 		do_IRQ(LOONGSON_UART_IRQ);
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
deleted file mode 100644
index e10f216d0422..000000000000
--- a/arch/mips/oprofile/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
-
-oprofile-$(CONFIG_CPU_MIPS32)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_XLR)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_LOONGSON2EF)	+= op_model_loongson2.o
-oprofile-$(CONFIG_CPU_LOONGSON64)	+= op_model_loongson3.o
diff --git a/arch/mips/oprofile/backtrace.c b/arch/mips/oprofile/backtrace.c
deleted file mode 100644
index 07d98ba7f49e..000000000000
--- a/arch/mips/oprofile/backtrace.c
+++ /dev/null
@@ -1,177 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-#include <linux/stacktrace.h>
-#include <linux/kernel.h>
-#include <asm/sections.h>
-#include <asm/inst.h>
-
-struct stackframe {
-	unsigned long sp;
-	unsigned long pc;
-	unsigned long ra;
-};
-
-static inline int get_mem(unsigned long addr, unsigned long *result)
-{
-	unsigned long *address = (unsigned long *) addr;
-	if (!access_ok(address, sizeof(unsigned long)))
-		return -1;
-	if (__copy_from_user_inatomic(result, address, sizeof(unsigned long)))
-		return -3;
-	return 0;
-}
-
-/*
- * These two instruction helpers were taken from process.c
- */
-static inline int is_ra_save_ins(union mips_instruction *ip)
-{
-	/* sw / sd $ra, offset($sp) */
-	return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op)
-		&& ip->i_format.rs == 29 && ip->i_format.rt == 31;
-}
-
-static inline int is_sp_move_ins(union mips_instruction *ip)
-{
-	/* addiu/daddiu sp,sp,-imm */
-	if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
-		return 0;
-	if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op)
-		return 1;
-	return 0;
-}
-
-/*
- * Looks for specific instructions that mark the end of a function.
- * This usually means we ran into the code area of the previous function.
- */
-static inline int is_end_of_function_marker(union mips_instruction *ip)
-{
-	/* jr ra */
-	if (ip->r_format.func == jr_op && ip->r_format.rs == 31)
-		return 1;
-	/* lui gp */
-	if (ip->i_format.opcode == lui_op && ip->i_format.rt == 28)
-		return 1;
-	return 0;
-}
-
-/*
- * TODO for userspace stack unwinding:
- * - handle cases where the stack is adjusted inside a function
- *     (generally doesn't happen)
- * - find optimal value for max_instr_check
- * - try to find a better way to handle leaf functions
- */
-
-static inline int unwind_user_frame(struct stackframe *old_frame,
-				    const unsigned int max_instr_check)
-{
-	struct stackframe new_frame = *old_frame;
-	off_t ra_offset = 0;
-	size_t stack_size = 0;
-	unsigned long addr;
-
-	if (old_frame->pc == 0 || old_frame->sp == 0 || old_frame->ra == 0)
-		return -9;
-
-	for (addr = new_frame.pc; (addr + max_instr_check > new_frame.pc)
-		&& (!ra_offset || !stack_size); --addr) {
-		union mips_instruction ip;
-
-		if (get_mem(addr, (unsigned long *) &ip))
-			return -11;
-
-		if (is_sp_move_ins(&ip)) {
-			int stack_adjustment = ip.i_format.simmediate;
-			if (stack_adjustment > 0)
-				/* This marks the end of the previous function,
-				   which means we overran. */
-				break;
-			stack_size = (unsigned long) stack_adjustment;
-		} else if (is_ra_save_ins(&ip)) {
-			int ra_slot = ip.i_format.simmediate;
-			if (ra_slot < 0)
-				/* This shouldn't happen. */
-				break;
-			ra_offset = ra_slot;
-		} else if (is_end_of_function_marker(&ip))
-			break;
-	}
-
-	if (!ra_offset || !stack_size)
-		goto done;
-
-	if (ra_offset) {
-		new_frame.ra = old_frame->sp + ra_offset;
-		if (get_mem(new_frame.ra, &(new_frame.ra)))
-			return -13;
-	}
-
-	if (stack_size) {
-		new_frame.sp = old_frame->sp + stack_size;
-		if (get_mem(new_frame.sp, &(new_frame.sp)))
-			return -14;
-	}
-
-	if (new_frame.sp > old_frame->sp)
-		return -2;
-
-done:
-	new_frame.pc = old_frame->ra;
-	*old_frame = new_frame;
-
-	return 0;
-}
-
-static inline void do_user_backtrace(unsigned long low_addr,
-				     struct stackframe *frame,
-				     unsigned int depth)
-{
-	const unsigned int max_instr_check = 512;
-	const unsigned long high_addr = low_addr + THREAD_SIZE;
-
-	while (depth-- && !unwind_user_frame(frame, max_instr_check)) {
-		oprofile_add_trace(frame->ra);
-		if (frame->sp < low_addr || frame->sp > high_addr)
-			break;
-	}
-}
-
-#ifndef CONFIG_KALLSYMS
-static inline void do_kernel_backtrace(unsigned long low_addr,
-				       struct stackframe *frame,
-				       unsigned int depth) { }
-#else
-static inline void do_kernel_backtrace(unsigned long low_addr,
-				       struct stackframe *frame,
-				       unsigned int depth)
-{
-	while (depth-- && frame->pc) {
-		frame->pc = unwind_stack_by_address(low_addr,
-						    &(frame->sp),
-						    frame->pc,
-						    &(frame->ra));
-		oprofile_add_trace(frame->ra);
-	}
-}
-#endif
-
-void notrace op_mips_backtrace(struct pt_regs *const regs, unsigned int depth)
-{
-	struct stackframe frame = { .sp = regs->regs[29],
-				    .pc = regs->cp0_epc,
-				    .ra = regs->regs[31] };
-	const int userspace = user_mode(regs);
-	const unsigned long low_addr = ALIGN(frame.sp, THREAD_SIZE);
-
-	if (userspace)
-		do_user_backtrace(low_addr, &frame, depth);
-	else
-		do_kernel_backtrace(low_addr, &frame, depth);
-}
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
deleted file mode 100644
index d3996c4c6440..000000000000
--- a/arch/mips/oprofile/common.c
+++ /dev/null
@@ -1,147 +0,0 @@ 
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 Ralf Baechle
- * Copyright (C) 2005 MIPS Technologies, Inc.
- */
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/cpu-info.h>
-#include <asm/cpu-type.h>
-
-#include "op_impl.h"
-
-extern struct op_mips_model op_model_mipsxx_ops __weak;
-extern struct op_mips_model op_model_loongson2_ops __weak;
-extern struct op_mips_model op_model_loongson3_ops __weak;
-
-static struct op_mips_model *model;
-
-static struct op_counter_config ctr[20];
-
-static int op_mips_setup(void)
-{
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(ctr);
-
-	/* Configure the registers on all cpus.	 */
-	on_each_cpu(model->cpu_setup, NULL, 1);
-
-	return 0;
-}
-
-static int op_mips_create_files(struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-
-		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(dir, "exl", &ctr[i].exl);
-		/* Dummy.  */
-		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	return 0;
-}
-
-static int op_mips_start(void)
-{
-	on_each_cpu(model->cpu_start, NULL, 1);
-
-	return 0;
-}
-
-static void op_mips_stop(void)
-{
-	/* Disable performance monitoring for all counters.  */
-	on_each_cpu(model->cpu_stop, NULL, 1);
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	struct op_mips_model *lmodel = NULL;
-	int res;
-
-	switch (boot_cpu_type()) {
-	case CPU_5KC:
-	case CPU_M14KC:
-	case CPU_M14KEC:
-	case CPU_20KC:
-	case CPU_24K:
-	case CPU_25KF:
-	case CPU_34K:
-	case CPU_1004K:
-	case CPU_74K:
-	case CPU_1074K:
-	case CPU_INTERAPTIV:
-	case CPU_PROAPTIV:
-	case CPU_P5600:
-	case CPU_I6400:
-	case CPU_M5150:
-	case CPU_LOONGSON32:
-	case CPU_SB1:
-	case CPU_SB1A:
-	case CPU_R10000:
-	case CPU_R12000:
-	case CPU_R14000:
-	case CPU_R16000:
-	case CPU_XLR:
-		lmodel = &op_model_mipsxx_ops;
-		break;
-
-	case CPU_LOONGSON2EF:
-		lmodel = &op_model_loongson2_ops;
-		break;
-	case CPU_LOONGSON64:
-		lmodel = &op_model_loongson3_ops;
-		break;
-	}
-
-	/*
-	 * Always set the backtrace. This allows unsupported CPU types to still
-	 * use timer-based oprofile.
-	 */
-	ops->backtrace = op_mips_backtrace;
-
-	if (!lmodel)
-		return -ENODEV;
-
-	res = lmodel->init();
-	if (res)
-		return res;
-
-	model = lmodel;
-
-	ops->create_files	= op_mips_create_files;
-	ops->setup		= op_mips_setup;
-	//ops->shutdown		= op_mips_shutdown;
-	ops->start		= op_mips_start;
-	ops->stop		= op_mips_stop;
-	ops->cpu_type		= lmodel->cpu_type;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       lmodel->cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-	if (model)
-		model->exit();
-}
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
deleted file mode 100644
index a4e758a39af4..000000000000
--- a/arch/mips/oprofile/op_impl.h
+++ /dev/null
@@ -1,41 +0,0 @@ 
-/**
- * @file arch/alpha/oprofile/op_impl.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-extern int (*perf_irq)(void);
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Dummies because I am too lazy to hack the userspace tools.  */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long exl;
-	unsigned long unit_mask;
-};
-
-/* Per-architecture configure and hooks.  */
-struct op_mips_model {
-	void (*reg_setup) (struct op_counter_config *);
-	void (*cpu_setup) (void *dummy);
-	int (*init)(void);
-	void (*exit)(void);
-	void (*cpu_start)(void *args);
-	void (*cpu_stop)(void *args);
-	char *cpu_type;
-	unsigned char num_counters;
-};
-
-void op_mips_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
deleted file mode 100644
index b249ec0bebb2..000000000000
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ /dev/null
@@ -1,161 +0,0 @@ 
-/*
- * Loongson2 performance counter driver for oprofile
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Yanhua <yanh@lemote.com>
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-
-#include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
-#include "op_impl.h"
-
-#define LOONGSON2_CPU_TYPE	"mips/loongson2"
-
-#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL	<< 31)
-
-#define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCTRL_KERNEL		(1UL	<<  1)
-#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL	<<  2)
-#define LOONGSON2_PERFCTRL_USER			(1UL	<<  3)
-#define LOONGSON2_PERFCTRL_ENABLE		(1UL	<<  4)
-#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
-	(((event) & 0x0f) << ((idx) ? 9 : 5))
-
-#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
-#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
-#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
-#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
-
-static struct loongson2_register_config {
-	unsigned int ctrl;
-	unsigned long long reset_counter1;
-	unsigned long long reset_counter2;
-	int cnt1_enabled, cnt2_enabled;
-} reg;
-
-static char *oprofid = "LoongsonPerf";
-static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
-
-static void reset_counters(void *arg)
-{
-	write_c0_perfctrl(0);
-	write_c0_perfcnt(0);
-}
-
-static void loongson2_reg_setup(struct op_counter_config *cfg)
-{
-	unsigned int ctrl = 0;
-
-	reg.reset_counter1 = 0;
-	reg.reset_counter2 = 0;
-
-	/*
-	 * Compute the performance counter ctrl word.
-	 * For now, count kernel and user mode.
-	 */
-	if (cfg[0].enabled) {
-		ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
-		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
-	}
-
-	if (cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
-		reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
-	}
-
-	if (cfg[0].enabled || cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
-		if (cfg[0].kernel || cfg[1].kernel)
-			ctrl |= LOONGSON2_PERFCTRL_KERNEL;
-		if (cfg[0].user || cfg[1].user)
-			ctrl |= LOONGSON2_PERFCTRL_USER;
-	}
-
-	reg.ctrl = ctrl;
-
-	reg.cnt1_enabled = cfg[0].enabled;
-	reg.cnt2_enabled = cfg[1].enabled;
-}
-
-static void loongson2_cpu_setup(void *args)
-{
-	write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
-}
-
-static void loongson2_cpu_start(void *args)
-{
-	/* Start all counters on current CPU */
-	if (reg.cnt1_enabled || reg.cnt2_enabled)
-		write_c0_perfctrl(reg.ctrl);
-}
-
-static void loongson2_cpu_stop(void *args)
-{
-	/* Stop all counters on current CPU */
-	write_c0_perfctrl(0);
-	memset(&reg, 0, sizeof(reg));
-}
-
-static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
-{
-	uint64_t counter, counter1, counter2;
-	struct pt_regs *regs = get_irq_regs();
-	int enabled;
-
-	/* Check whether the irq belongs to me */
-	enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
-	if (!enabled)
-		return IRQ_NONE;
-	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
-	if (!enabled)
-		return IRQ_NONE;
-
-	counter = read_c0_perfcnt();
-	counter1 = counter & 0xffffffff;
-	counter2 = counter >> 32;
-
-	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt1_enabled)
-			oprofile_add_sample(regs, 0);
-		counter1 = reg.reset_counter1;
-	}
-	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt2_enabled)
-			oprofile_add_sample(regs, 1);
-		counter2 = reg.reset_counter2;
-	}
-
-	write_c0_perfcnt((counter2 << 32) | counter1);
-
-	return IRQ_HANDLED;
-}
-
-static int __init loongson2_init(void)
-{
-	return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler,
-			   IRQF_SHARED, "Perfcounter", oprofid);
-}
-
-static void loongson2_exit(void)
-{
-	reset_counters(NULL);
-	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
-}
-
-struct op_mips_model op_model_loongson2_ops = {
-	.reg_setup = loongson2_reg_setup,
-	.cpu_setup = loongson2_cpu_setup,
-	.init = loongson2_init,
-	.exit = loongson2_exit,
-	.cpu_start = loongson2_cpu_start,
-	.cpu_stop = loongson2_cpu_stop,
-	.cpu_type = LOONGSON2_CPU_TYPE,
-	.num_counters = 2
-};
diff --git a/arch/mips/oprofile/op_model_loongson3.c b/arch/mips/oprofile/op_model_loongson3.c
deleted file mode 100644
index 436b1fc99f2c..000000000000
--- a/arch/mips/oprofile/op_model_loongson3.c
+++ /dev/null
@@ -1,213 +0,0 @@ 
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/proc_fs.h>
-#include <linux/oprofile.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <irq.h>
-#include <loongson.h>
-#include "op_impl.h"
-
-#define LOONGSON3_PERFCNT_OVERFLOW	(1ULL << 63)
-
-#define LOONGSON3_PERFCTRL_EXL		(1UL << 0)
-#define LOONGSON3_PERFCTRL_KERNEL	(1UL << 1)
-#define LOONGSON3_PERFCTRL_SUPERVISOR	(1UL << 2)
-#define LOONGSON3_PERFCTRL_USER		(1UL << 3)
-#define LOONGSON3_PERFCTRL_ENABLE	(1UL << 4)
-#define LOONGSON3_PERFCTRL_W		(1UL << 30)
-#define LOONGSON3_PERFCTRL_M		(1UL << 31)
-#define LOONGSON3_PERFCTRL_EVENT(idx, event) \
-	(((event) & (idx ? 0x0f : 0x3f)) << 5)
-
-/* Loongson-3 PerfCount performance counter1 register */
-#define read_c0_perflo1() __read_64bit_c0_register($25, 0)
-#define write_c0_perflo1(val) __write_64bit_c0_register($25, 0, val)
-#define read_c0_perfhi1() __read_64bit_c0_register($25, 1)
-#define write_c0_perfhi1(val) __write_64bit_c0_register($25, 1, val)
-
-/* Loongson-3 PerfCount performance counter2 register */
-#define read_c0_perflo2() __read_64bit_c0_register($25, 2)
-#define write_c0_perflo2(val) __write_64bit_c0_register($25, 2, val)
-#define read_c0_perfhi2() __read_64bit_c0_register($25, 3)
-#define write_c0_perfhi2(val) __write_64bit_c0_register($25, 3, val)
-
-static int (*save_perf_irq)(void);
-
-static struct loongson3_register_config {
-	unsigned int control1;
-	unsigned int control2;
-	unsigned long long reset_counter1;
-	unsigned long long reset_counter2;
-	int ctr1_enable, ctr2_enable;
-} reg;
-
-static void reset_counters(void *arg)
-{
-	write_c0_perfhi1(0);
-	write_c0_perfhi2(0);
-	write_c0_perflo1(0xc0000000);
-	write_c0_perflo2(0x40000000);
-}
-
-/* Compute all of the registers in preparation for enabling profiling. */
-static void loongson3_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int control1 = 0;
-	unsigned int control2 = 0;
-
-	reg.reset_counter1 = 0;
-	reg.reset_counter2 = 0;
-	/* Compute the performance counter control word. */
-	/* For now count kernel and user mode */
-	if (ctr[0].enabled) {
-		control1 |= LOONGSON3_PERFCTRL_EVENT(0, ctr[0].event) |
-					LOONGSON3_PERFCTRL_ENABLE;
-		if (ctr[0].kernel)
-			control1 |= LOONGSON3_PERFCTRL_KERNEL;
-		if (ctr[0].user)
-			control1 |= LOONGSON3_PERFCTRL_USER;
-		reg.reset_counter1 = 0x8000000000000000ULL - ctr[0].count;
-	}
-
-	if (ctr[1].enabled) {
-		control2 |= LOONGSON3_PERFCTRL_EVENT(1, ctr[1].event) |
-					LOONGSON3_PERFCTRL_ENABLE;
-		if (ctr[1].kernel)
-			control2 |= LOONGSON3_PERFCTRL_KERNEL;
-		if (ctr[1].user)
-			control2 |= LOONGSON3_PERFCTRL_USER;
-		reg.reset_counter2 = 0x8000000000000000ULL - ctr[1].count;
-	}
-
-	if (ctr[0].enabled)
-		control1 |= LOONGSON3_PERFCTRL_EXL;
-	if (ctr[1].enabled)
-		control2 |= LOONGSON3_PERFCTRL_EXL;
-
-	reg.control1 = control1;
-	reg.control2 = control2;
-	reg.ctr1_enable = ctr[0].enabled;
-	reg.ctr2_enable = ctr[1].enabled;
-}
-
-/* Program all of the registers in preparation for enabling profiling. */
-static void loongson3_cpu_setup(void *args)
-{
-	uint64_t perfcount1, perfcount2;
-
-	perfcount1 = reg.reset_counter1;
-	perfcount2 = reg.reset_counter2;
-	write_c0_perfhi1(perfcount1);
-	write_c0_perfhi2(perfcount2);
-}
-
-static void loongson3_cpu_start(void *args)
-{
-	/* Start all counters on current CPU */
-	reg.control1 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
-	reg.control2 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
-
-	if (reg.ctr1_enable)
-		write_c0_perflo1(reg.control1);
-	if (reg.ctr2_enable)
-		write_c0_perflo2(reg.control2);
-}
-
-static void loongson3_cpu_stop(void *args)
-{
-	/* Stop all counters on current CPU */
-	write_c0_perflo1(0xc0000000);
-	write_c0_perflo2(0x40000000);
-	memset(&reg, 0, sizeof(reg));
-}
-
-static int loongson3_perfcount_handler(void)
-{
-	unsigned long flags;
-	uint64_t counter1, counter2;
-	uint32_t cause, handled = IRQ_NONE;
-	struct pt_regs *regs = get_irq_regs();
-
-	cause = read_c0_cause();
-	if (!(cause & CAUSEF_PCI))
-		return handled;
-
-	counter1 = read_c0_perfhi1();
-	counter2 = read_c0_perfhi2();
-
-	local_irq_save(flags);
-
-	if (counter1 & LOONGSON3_PERFCNT_OVERFLOW) {
-		if (reg.ctr1_enable)
-			oprofile_add_sample(regs, 0);
-		counter1 = reg.reset_counter1;
-	}
-	if (counter2 & LOONGSON3_PERFCNT_OVERFLOW) {
-		if (reg.ctr2_enable)
-			oprofile_add_sample(regs, 1);
-		counter2 = reg.reset_counter2;
-	}
-
-	local_irq_restore(flags);
-
-	write_c0_perfhi1(counter1);
-	write_c0_perfhi2(counter2);
-
-	if (!(cause & CAUSEF_TI))
-		handled = IRQ_HANDLED;
-
-	return handled;
-}
-
-static int loongson3_starting_cpu(unsigned int cpu)
-{
-	write_c0_perflo1(reg.control1);
-	write_c0_perflo2(reg.control2);
-	return 0;
-}
-
-static int loongson3_dying_cpu(unsigned int cpu)
-{
-	write_c0_perflo1(0xc0000000);
-	write_c0_perflo2(0x40000000);
-	return 0;
-}
-
-static int __init loongson3_init(void)
-{
-	on_each_cpu(reset_counters, NULL, 1);
-	cpuhp_setup_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING,
-				  "mips/oprofile/loongson3:starting",
-				  loongson3_starting_cpu, loongson3_dying_cpu);
-	save_perf_irq = perf_irq;
-	perf_irq = loongson3_perfcount_handler;
-
-	return 0;
-}
-
-static void loongson3_exit(void)
-{
-	on_each_cpu(reset_counters, NULL, 1);
-	cpuhp_remove_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING);
-	perf_irq = save_perf_irq;
-}
-
-struct op_mips_model op_model_loongson3_ops = {
-	.reg_setup	= loongson3_reg_setup,
-	.cpu_setup	= loongson3_cpu_setup,
-	.init		= loongson3_init,
-	.exit		= loongson3_exit,
-	.cpu_start	= loongson3_cpu_start,
-	.cpu_stop	= loongson3_cpu_stop,
-	.cpu_type	= "mips/loongson3",
-	.num_counters	= 2
-};
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
deleted file mode 100644
index 55d7b7fd18b6..000000000000
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ /dev/null
@@ -1,479 +0,0 @@ 
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 05, 06 by Ralf Baechle
- * Copyright (C) 2005 by MIPS Technologies, Inc.
- */
-#include <linux/cpumask.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <asm/irq_regs.h>
-#include <asm/time.h>
-
-#include "op_impl.h"
-
-#define M_PERFCTL_EVENT(event)		(((event) << MIPS_PERFCTRL_EVENT_S) & \
-					 MIPS_PERFCTRL_EVENT)
-#define M_PERFCTL_VPEID(vpe)		((vpe)	  << MIPS_PERFCTRL_VPEID_S)
-
-#define M_COUNTER_OVERFLOW		(1UL	  << 31)
-
-static int (*save_perf_irq)(void);
-static int perfcount_irq;
-
-/*
- * XLR has only one set of counters per core. Designate the
- * first hardware thread in the core for setup and init.
- * Skip CPUs with non-zero hardware thread id (4 hwt per core)
- */
-#if defined(CONFIG_CPU_XLR) && defined(CONFIG_SMP)
-#define oprofile_skip_cpu(c)	((cpu_logical_map(c) & 0x3) != 0)
-#else
-#define oprofile_skip_cpu(c)	0
-#endif
-
-#ifdef CONFIG_MIPS_MT_SMP
-#define WHAT		(MIPS_PERFCTRL_MT_EN_VPE | \
-			 M_PERFCTL_VPEID(cpu_vpe_id(&current_cpu_data)))
-#define vpe_id()	(cpu_has_mipsmt_pertccounters ? \
-			0 : cpu_vpe_id(&current_cpu_data))
-
-/*
- * The number of bits to shift to convert between counters per core and
- * counters per VPE.  There is no reasonable interface atm to obtain the
- * number of VPEs used by Linux and in the 34K this number is fixed to two
- * anyways so we hardcore a few things here for the moment.  The way it's
- * done here will ensure that oprofile VSMP kernel will run right on a lesser
- * core like a 24K also or with maxcpus=1.
- */
-static inline unsigned int vpe_shift(void)
-{
-	if (num_possible_cpus() > 1)
-		return 1;
-
-	return 0;
-}
-
-#else
-
-#define WHAT		0
-#define vpe_id()	0
-
-static inline unsigned int vpe_shift(void)
-{
-	return 0;
-}
-
-#endif
-
-static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
-{
-	return counters >> vpe_shift();
-}
-
-static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
-	return counters << vpe_shift();
-}
-
-#define __define_perf_accessors(r, n, np)				\
-									\
-static inline unsigned int r_c0_ ## r ## n(void)			\
-{									\
-	unsigned int cpu = vpe_id();					\
-									\
-	switch (cpu) {							\
-	case 0:								\
-		return read_c0_ ## r ## n();				\
-	case 1:								\
-		return read_c0_ ## r ## np();				\
-	default:							\
-		BUG();							\
-	}								\
-	return 0;							\
-}									\
-									\
-static inline void w_c0_ ## r ## n(unsigned int value)			\
-{									\
-	unsigned int cpu = vpe_id();					\
-									\
-	switch (cpu) {							\
-	case 0:								\
-		write_c0_ ## r ## n(value);				\
-		return;							\
-	case 1:								\
-		write_c0_ ## r ## np(value);				\
-		return;							\
-	default:							\
-		BUG();							\
-	}								\
-	return;								\
-}									\
-
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
-
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
-
-struct op_mips_model op_model_mipsxx_ops;
-
-static struct mipsxx_register_config {
-	unsigned int control[4];
-	unsigned int counter[4];
-} reg;
-
-/* Compute all of the registers in preparation for enabling profiling.	*/
-
-static void mipsxx_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-	int i;
-
-	/* Compute the performance counter control word.  */
-	for (i = 0; i < counters; i++) {
-		reg.control[i] = 0;
-		reg.counter[i] = 0;
-
-		if (!ctr[i].enabled)
-			continue;
-
-		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
-				 MIPS_PERFCTRL_IE;
-		if (ctr[i].kernel)
-			reg.control[i] |= MIPS_PERFCTRL_K;
-		if (ctr[i].user)
-			reg.control[i] |= MIPS_PERFCTRL_U;
-		if (ctr[i].exl)
-			reg.control[i] |= MIPS_PERFCTRL_EXL;
-		if (boot_cpu_type() == CPU_XLR)
-			reg.control[i] |= XLR_PERFCTRL_ALLTHREADS;
-		reg.counter[i] = 0x80000000 - ctr[i].count;
-	}
-}
-
-/* Program all of the registers in preparation for enabling profiling.	*/
-
-static void mipsxx_cpu_setup(void *args)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-
-	if (oprofile_skip_cpu(smp_processor_id()))
-		return;
-
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(0);
-		w_c0_perfcntr3(reg.counter[3]);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(0);
-		w_c0_perfcntr2(reg.counter[2]);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(0);
-		w_c0_perfcntr1(reg.counter[1]);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(0);
-		w_c0_perfcntr0(reg.counter[0]);
-	}
-}
-
-/* Start all counters on current CPU */
-static void mipsxx_cpu_start(void *args)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-
-	if (oprofile_skip_cpu(smp_processor_id()))
-		return;
-
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(WHAT | reg.control[3]);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(WHAT | reg.control[2]);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(WHAT | reg.control[1]);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(WHAT | reg.control[0]);
-	}
-}
-
-/* Stop all counters on current CPU */
-static void mipsxx_cpu_stop(void *args)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-
-	if (oprofile_skip_cpu(smp_processor_id()))
-		return;
-
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(0);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(0);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(0);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(0);
-	}
-}
-
-static int mipsxx_perfcount_handler(void)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-	unsigned int control;
-	unsigned int counter;
-	int handled = IRQ_NONE;
-
-	if (cpu_has_mips_r2 && !(read_c0_cause() & CAUSEF_PCI))
-		return handled;
-
-	switch (counters) {
-#define HANDLE_COUNTER(n)						\
-	case n + 1:							\
-		control = r_c0_perfctrl ## n();				\
-		counter = r_c0_perfcntr ## n();				\
-		if ((control & MIPS_PERFCTRL_IE) &&			\
-		    (counter & M_COUNTER_OVERFLOW)) {			\
-			oprofile_add_sample(get_irq_regs(), n);		\
-			w_c0_perfcntr ## n(reg.counter[n]);		\
-			handled = IRQ_HANDLED;				\
-		}
-	HANDLE_COUNTER(3)
-	fallthrough;
-	HANDLE_COUNTER(2)
-	fallthrough;
-	HANDLE_COUNTER(1)
-	fallthrough;
-	HANDLE_COUNTER(0)
-	}
-
-	return handled;
-}
-
-static inline int __n_counters(void)
-{
-	if (!cpu_has_perf)
-		return 0;
-	if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M))
-		return 1;
-	if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M))
-		return 2;
-	if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M))
-		return 3;
-
-	return 4;
-}
-
-static inline int n_counters(void)
-{
-	int counters;
-
-	switch (current_cpu_type()) {
-	case CPU_R10000:
-		counters = 2;
-		break;
-
-	case CPU_R12000:
-	case CPU_R14000:
-	case CPU_R16000:
-		counters = 4;
-		break;
-
-	default:
-		counters = __n_counters();
-	}
-
-	return counters;
-}
-
-static void reset_counters(void *arg)
-{
-	int counters = (int)(long)arg;
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(0);
-		w_c0_perfcntr3(0);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(0);
-		w_c0_perfcntr2(0);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(0);
-		w_c0_perfcntr1(0);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(0);
-		w_c0_perfcntr0(0);
-	}
-}
-
-static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
-{
-	return mipsxx_perfcount_handler();
-}
-
-static int __init mipsxx_init(void)
-{
-	int counters;
-
-	counters = n_counters();
-	if (counters == 0) {
-		printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
-		return -ENODEV;
-	}
-
-#ifdef CONFIG_MIPS_MT_SMP
-	if (!cpu_has_mipsmt_pertccounters)
-		counters = counters_total_to_per_cpu(counters);
-#endif
-	on_each_cpu(reset_counters, (void *)(long)counters, 1);
-
-	op_model_mipsxx_ops.num_counters = counters;
-	switch (current_cpu_type()) {
-	case CPU_M14KC:
-		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
-		break;
-
-	case CPU_M14KEC:
-		op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
-		break;
-
-	case CPU_20KC:
-		op_model_mipsxx_ops.cpu_type = "mips/20K";
-		break;
-
-	case CPU_24K:
-		op_model_mipsxx_ops.cpu_type = "mips/24K";
-		break;
-
-	case CPU_25KF:
-		op_model_mipsxx_ops.cpu_type = "mips/25K";
-		break;
-
-	case CPU_1004K:
-	case CPU_34K:
-		op_model_mipsxx_ops.cpu_type = "mips/34K";
-		break;
-
-	case CPU_1074K:
-	case CPU_74K:
-		op_model_mipsxx_ops.cpu_type = "mips/74K";
-		break;
-
-	case CPU_INTERAPTIV:
-		op_model_mipsxx_ops.cpu_type = "mips/interAptiv";
-		break;
-
-	case CPU_PROAPTIV:
-		op_model_mipsxx_ops.cpu_type = "mips/proAptiv";
-		break;
-
-	case CPU_P5600:
-		op_model_mipsxx_ops.cpu_type = "mips/P5600";
-		break;
-
-	case CPU_I6400:
-		op_model_mipsxx_ops.cpu_type = "mips/I6400";
-		break;
-
-	case CPU_M5150:
-		op_model_mipsxx_ops.cpu_type = "mips/M5150";
-		break;
-
-	case CPU_5KC:
-		op_model_mipsxx_ops.cpu_type = "mips/5K";
-		break;
-
-	case CPU_R10000:
-		if ((current_cpu_data.processor_id & 0xff) == 0x20)
-			op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
-		else
-			op_model_mipsxx_ops.cpu_type = "mips/r10000";
-		break;
-
-	case CPU_R12000:
-	case CPU_R14000:
-		op_model_mipsxx_ops.cpu_type = "mips/r12000";
-		break;
-
-	case CPU_R16000:
-		op_model_mipsxx_ops.cpu_type = "mips/r16000";
-		break;
-
-	case CPU_SB1:
-	case CPU_SB1A:
-		op_model_mipsxx_ops.cpu_type = "mips/sb1";
-		break;
-
-	case CPU_LOONGSON32:
-		op_model_mipsxx_ops.cpu_type = "mips/loongson1";
-		break;
-
-	case CPU_XLR:
-		op_model_mipsxx_ops.cpu_type = "mips/xlr";
-		break;
-
-	default:
-		printk(KERN_ERR "Profiling unsupported for this CPU\n");
-
-		return -ENODEV;
-	}
-
-	save_perf_irq = perf_irq;
-	perf_irq = mipsxx_perfcount_handler;
-
-	if (get_c0_perfcount_int)
-		perfcount_irq = get_c0_perfcount_int();
-	else if (cp0_perfcount_irq >= 0)
-		perfcount_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
-	else
-		perfcount_irq = -1;
-
-	if (perfcount_irq >= 0)
-		return request_irq(perfcount_irq, mipsxx_perfcount_int,
-				   IRQF_PERCPU | IRQF_NOBALANCING |
-				   IRQF_NO_THREAD | IRQF_NO_SUSPEND |
-				   IRQF_SHARED,
-				   "Perfcounter", save_perf_irq);
-
-	return 0;
-}
-
-static void mipsxx_exit(void)
-{
-	int counters = op_model_mipsxx_ops.num_counters;
-
-	if (perfcount_irq >= 0)
-		free_irq(perfcount_irq, save_perf_irq);
-
-	counters = counters_per_cpu_to_total(counters);
-	on_each_cpu(reset_counters, (void *)(long)counters, 1);
-
-	perf_irq = save_perf_irq;
-}
-
-struct op_mips_model op_model_mipsxx_ops = {
-	.reg_setup	= mipsxx_reg_setup,
-	.cpu_setup	= mipsxx_cpu_setup,
-	.init		= mipsxx_init,
-	.exit		= mipsxx_exit,
-	.cpu_start	= mipsxx_cpu_start,
-	.cpu_stop	= mipsxx_cpu_stop,
-};