mbox series

[0/8] Raspberry Pi 4 DMA addressing support

Message ID 20190731154752.16557-1-nsaenzjulienne@suse.de (mailing list archive)
Headers show
Series Raspberry Pi 4 DMA addressing support | expand

Message

Nicolas Saenz Julienne July 31, 2019, 3:47 p.m. UTC
Hi all,
this series attempts to address some issues we found while bringing up
the new Raspberry Pi 4 in arm64 and it's intended to serve as a follow
up of this discussion:
https://lkml.org/lkml/2019/7/17/476

The new Raspberry Pi 4 has up to 4GB of memory but most peripherals can
only address the first GB: their DMA address range is
0xc0000000-0xfc000000 which is aliased to the first GB of physical
memory 0x00000000-0x3c000000. Note that only some peripherals have these
limitations: the ARM cores, PCIe, V3D, GENET, and 40-bit DMA channels
have a wider view of the address space.

Part of this is solved in arm32 by setting up the machine specific
'.dma_zone_size = SZ_1G', which takes care of the allocating the
coherent memory area at the right spot. Yet no buffer bouncing (needed
for dma streaming) is available at the moment, but that's a story for
another series.

Unfortunately there is no such thing as '.dma_zone_size' in arm64 also
only ZONE_DMA32 is created which is interpreted by dma-direct and the
arm64 code as if all peripherals where be able to address the first 4GB
of memory.

In the light of this, the series implements the following changes:

- Add code that parses the device-tree in oder to find the SoC's common
  DMA area.

- Create a ZONE_DMA whenever that area is needed and add the rest of the
  lower 4 GB of memory to ZONE_DMA32*.

- Create the CMA area in a place suitable for all peripherals.

- Inform dma-direct of the new runtime calculated min_mask*.

That's all.

Regards,
Nicolas

* These solutions where already discussed on the previous RFC (see link
above).

---

Nicolas Saenz Julienne (8):
  arm64: mm: use arm64_dma_phys_limit instead of calling
    max_zone_dma_phys()
  arm64: rename variables used to calculate ZONE_DMA32's size
  of/fdt: add function to get the SoC wide DMA addressable memory size
  arm64: re-introduce max_zone_dma_phys()
  arm64: use ZONE_DMA on DMA addressing limited devices
  dma-direct: turn ARCH_ZONE_DMA_BITS into a variable
  arm64: update arch_zone_dma_bits to fine tune dma-direct min mask
  mm: comment arm64's usage of 'enum zone_type'

 arch/arm64/Kconfig              |  4 ++
 arch/arm64/mm/init.c            | 78 ++++++++++++++++++++++++++-------
 arch/powerpc/include/asm/page.h |  9 ----
 arch/powerpc/mm/mem.c           | 14 +++++-
 arch/s390/include/asm/page.h    |  2 -
 arch/s390/mm/init.c             |  1 +
 drivers/of/fdt.c                | 72 ++++++++++++++++++++++++++++++
 include/linux/dma-direct.h      |  2 +
 include/linux/mmzone.h          | 21 ++++-----
 include/linux/of_fdt.h          |  2 +
 kernel/dma/direct.c             |  8 ++--
 11 files changed, 168 insertions(+), 45 deletions(-)