mbox series

[RESEND,v7,0/3] memory,x86,acpi: hotplug memory alignment advisement

Message ID 20250113174439.1965168-1-gourry@gourry.net (mailing list archive)
Headers show
Series memory,x86,acpi: hotplug memory alignment advisement | expand

Message

Gregory Price Jan. 13, 2025, 5:44 p.m. UTC 
resend: Not clear if this should go through -mm or -acpi
	clean rebase on mm-unstable as of Jan 13, no changes


When physical address regions are not aligned to memory block size,
the misaligned portion is lost (stranded capacity).

Block size (min/max/selected) is architecture defined. Most architectures
tend to use the minimum block size or some simplistic heurist. On x86,
memory block size increases up to 2GB, and is otherwise fitted to the
alignment of non-hotplug (i.e. not special purpose memory).

CXL exposes its memory for management through the ACPI CEDT (CXL Early
Detection Table) in a field called the CXL Fixed Memory Window.  Per
the CXL specification, this memory must be aligned to at least 256MB.

When a CFMW aligns on a size less than the block size, this causes a
loss of up to 2GB per CFMW on x86.  It is not uncommon for CFMW to be
allocated per-device - though this behavior is BIOS defined.

This patch set provides 3 things:
 1) implement advise/query functions in driverse/base/memory.c to
    report/query architecture agnostic hotplug block alignment advice.
 2) update x86 memblock size logic to consider the hotplug advice
 3) add code in acpi/numa/srat.c to report CFMW alignment advice

The advisement interfaces are design to be called during arch_init
code prior to allocator and smp_init.  start_kernel will call these
through setup_arch() (via acpi and mm/init_64.c on x86), which occurs
prior to mm_core_init and smp_init - so no need for atomics.

There's an attempt to signal callers to advise() that query has already
occurred, but this is predicated on the notion that query actually
occurs (which presently only happens on the x86 arch). This is to
assist debugging future users.  Otherwise, the advise() call has
been marked __init to help static discovery of bad call times.

Once query is called the first time, it will always return the same value.

Interfaces return -EBUSY and 0 respectively on systems without hotplug.

Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Gregory Price <gourry@gourry.net>
Tested-by: Fan Ni <fan.ni@samsung.com>

Gregory Price (3):
  memory: implement memory_block_advise/probe_max_size
  x86: probe memory block size advisement value during mm init
  acpi,srat: give memory block size advice based on CFMWS alignment

 arch/x86/mm/init_64.c    | 15 ++++++++----
 drivers/acpi/numa/srat.c | 12 ++++++++-
 drivers/base/memory.c    | 53 ++++++++++++++++++++++++++++++++++++++++
 include/linux/memory.h   | 10 ++++++++
 4 files changed, 84 insertions(+), 6 deletions(-)