@@ -10,6 +10,153 @@ encrypting the guest memory. In TDX, a special module running in a special
mode sits between the host and the guest and manages the guest/host
separation.
+TDX Host Kernel Support
+=======================
+
+TDX introduces a new CPU mode called Secure Arbitration Mode (SEAM) and
+a new isolated range pointed by the SEAM Ranger Register (SEAMRR). A
+CPU-attested software module called 'the TDX module' runs inside the new
+isolated range to provide the functionalities to manage and run protected
+VMs.
+
+TDX also leverages Intel Multi-Key Total Memory Encryption (MKTME) to
+provide crypto-protection to the VMs. TDX reserves part of MKTME KeyIDs
+as TDX private KeyIDs, which are only accessible within the SEAM mode.
+BIOS is responsible for partitioning legacy MKTME KeyIDs and TDX KeyIDs.
+
+Before the TDX module can be used to create and run protected VMs, it
+must be loaded into the isolated range and properly initialized. The TDX
+architecture doesn't require the BIOS to load the TDX module, but the
+kernel assumes it is loaded by the BIOS.
+
+TDX boot-time detection
+-----------------------
+
+The kernel detects TDX by detecting TDX private KeyIDs during kernel
+boot. Below dmesg shows when TDX is enabled by BIOS::
+
+ [..] tdx: BIOS enabled: private KeyID range: [16, 64).
+
+TDX module detection and initialization
+---------------------------------------
+
+There is no CPUID or MSR to detect the TDX module. The kernel detects it
+by initializing it.
+
+The kernel talks to the TDX module via the new SEAMCALL instruction. The
+TDX module implements SEAMCALL leaf functions to allow the kernel to
+initialize it.
+
+Initializing the TDX module consumes roughly ~1/256th system RAM size to
+use it as 'metadata' for the TDX memory. It also takes additional CPU
+time to initialize those metadata along with the TDX module itself. Both
+are not trivial. The kernel initializes the TDX module at runtime on
+demand. The caller to call tdx_enable() to initialize the TDX module::
+
+ ret = tdx_enable();
+ if (ret)
+ goto no_tdx;
+ // TDX is ready to use
+
+One step of initializing the TDX module requires at least one online cpu
+for each package. The caller needs to guarantee this otherwise the
+initialization will fail.
+
+Making SEAMCALL requires the CPU already being in VMX operation (VMXON
+has been done). For now tdx_enable() doesn't handle VMXON internally,
+but depends on the caller to guarantee that. So far only KVM calls
+tdx_enable() and KVM already handles VMXON.
+
+User can consult dmesg to see the presence of the TDX module, and whether
+it has been initialized.
+
+If the TDX module is not loaded, dmesg shows below::
+
+ [..] tdx: TDX module is not loaded.
+
+If the TDX module is initialized successfully, dmesg shows something
+like below::
+
+ [..] tdx: TDX module: attributes 0x0, vendor_id 0x8086, major_version 1, minor_version 0, build_date 20211209, build_num 160
+ [..] tdx: 65667 pages allocated for PAMT.
+ [..] tdx: TDX module initialized.
+
+If the TDX module failed to initialize, dmesg also shows it failed to
+initialize::
+
+ [..] tdx: initialization failed ...
+
+TDX Interaction to Other Kernel Components
+------------------------------------------
+
+TDX Memory Policy
+~~~~~~~~~~~~~~~~~
+
+TDX reports a list of "Convertible Memory Region" (CMR) to tell the
+kernel which memory is TDX compatible. The kernel needs to build a list
+of memory regions (out of CMRs) as "TDX-usable" memory and pass those
+regions to the TDX module. Once this is done, those "TDX-usable" memory
+regions are fixed during module's lifetime.
+
+To keep things simple, currently the kernel simply guarantees all pages
+in the page allocator are TDX memory. Specifically, the kernel uses all
+system memory in the core-mm at the time of initializing the TDX module
+as TDX memory, and in the meantime, refuses to online any non-TDX-memory
+in the memory hotplug.
+
+This can be enhanced in the future, i.e. by allowing adding non-TDX
+memory to a separate NUMA node. In this case, the "TDX-capable" nodes
+and the "non-TDX-capable" nodes can co-exist, but the kernel/userspace
+needs to guarantee memory pages for TDX guests are always allocated from
+the "TDX-capable" nodes.
+
+Physical Memory Hotplug
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Note TDX assumes convertible memory is always physically present during
+machine's runtime. A non-buggy BIOS should never support hot-removal of
+any convertible memory. This implementation doesn't handle ACPI memory
+removal but depends on the BIOS to behave correctly.
+
+CPU Hotplug
+~~~~~~~~~~~
+
+TDX doesn't support physical (ACPI) CPU hotplug. During machine boot,
+TDX verifies all boot-time present logical CPUs are TDX compatible before
+enabling TDX. A non-buggy BIOS should never support hot-add/removal of
+physical CPU. Currently the kernel doesn't handle physical CPU hotplug,
+but depends on the BIOS to behave correctly.
+
+Note TDX works with CPU logical online/offline, thus the kernel still
+allows to offline logical CPU and online it again.
+
+Kexec()
+~~~~~~~
+
+There are two problems in terms of using kexec() to boot to a new kernel
+when the old kernel has enabled TDX: 1) Part of the memory pages are
+still TDX private pages (i.e. metadata used by the TDX module, and any
+TDX guest memory if kexec() is executed when there's live TDX guests).
+2) There might be dirty cachelines associated with TDX private pages.
+
+Because the hardware doesn't guarantee cache coherency among different
+KeyIDs, the old kernel needs to flush cache (of TDX private pages)
+before booting to the new kernel. Also, the kernel doesn't convert all
+TDX private pages back to normal because of below considerations:
+
+1) Neither the kernel nor the TDX module has existing infrastructure to
+ track which pages are TDX private page.
+2) The number of TDX private pages can be large, and converting all of
+ them (cache flush + using MOVDIR64B to clear the page) can be time
+ consuming.
+3) The new kernel will almost only use KeyID 0 to access memory. KeyID
+ 0 doesn't support integrity-check, so it's OK.
+4) The kernel doesn't (and may never) support MKTME. If any 3rd party
+ kernel ever supports MKTME, it can/should do MOVDIR64B to clear the
+ page with the new MKTME KeyID (just like TDX does) before using it.
+
+TDX Guest Support
+=================
Since the host cannot directly access guest registers or memory, much
normal functionality of a hypervisor must be moved into the guest. This is
implemented using a Virtualization Exception (#VE) that is handled by the
@@ -20,7 +167,7 @@ TDX includes new hypercall-like mechanisms for communicating from the
guest to the hypervisor or the TDX module.
New TDX Exceptions
-==================
+------------------
TDX guests behave differently from bare-metal and traditional VMX guests.
In TDX guests, otherwise normal instructions or memory accesses can cause
@@ -30,7 +177,7 @@ Instructions marked with an '*' conditionally cause exceptions. The
details for these instructions are discussed below.
Instruction-based #VE
----------------------
+~~~~~~~~~~~~~~~~~~~~~
- Port I/O (INS, OUTS, IN, OUT)
- HLT
@@ -41,7 +188,7 @@ Instruction-based #VE
- CPUID*
Instruction-based #GP
----------------------
+~~~~~~~~~~~~~~~~~~~~~
- All VMX instructions: INVEPT, INVVPID, VMCLEAR, VMFUNC, VMLAUNCH,
VMPTRLD, VMPTRST, VMREAD, VMRESUME, VMWRITE, VMXOFF, VMXON
@@ -52,7 +199,7 @@ Instruction-based #GP
- RDMSR*,WRMSR*
RDMSR/WRMSR Behavior
---------------------
+~~~~~~~~~~~~~~~~~~~~
MSR access behavior falls into three categories:
@@ -73,7 +220,7 @@ trapping and handling in the TDX module. Other than possibly being slow,
these MSRs appear to function just as they would on bare metal.
CPUID Behavior
---------------
+~~~~~~~~~~~~~~
For some CPUID leaves and sub-leaves, the virtualized bit fields of CPUID
return values (in guest EAX/EBX/ECX/EDX) are configurable by the
@@ -93,7 +240,7 @@ not know how to handle. The guest kernel may ask the hypervisor for the
value with a hypercall.
#VE on Memory Accesses
-======================
+----------------------
There are essentially two classes of TDX memory: private and shared.
Private memory receives full TDX protections. Its content is protected
@@ -107,7 +254,7 @@ entries. This helps ensure that a guest does not place sensitive
information in shared memory, exposing it to the untrusted hypervisor.
#VE on Shared Memory
---------------------
+~~~~~~~~~~~~~~~~~~~~
Access to shared mappings can cause a #VE. The hypervisor ultimately
controls whether a shared memory access causes a #VE, so the guest must be
@@ -127,7 +274,7 @@ be careful not to access device MMIO regions unless it is also prepared to
handle a #VE.
#VE on Private Pages
---------------------
+~~~~~~~~~~~~~~~~~~~~
An access to private mappings can also cause a #VE. Since all kernel
memory is also private memory, the kernel might theoretically need to
@@ -145,7 +292,7 @@ The hypervisor is permitted to unilaterally move accepted pages to a
to handle the exception.
Linux #VE handler
-=================
+-----------------
Just like page faults or #GP's, #VE exceptions can be either handled or be
fatal. Typically, an unhandled userspace #VE results in a SIGSEGV.
@@ -167,7 +314,7 @@ While the block is in place, any #VE is elevated to a double fault (#DF)
which is not recoverable.
MMIO handling
-=============
+-------------
In non-TDX VMs, MMIO is usually implemented by giving a guest access to a
mapping which will cause a VMEXIT on access, and then the hypervisor
@@ -189,7 +336,7 @@ MMIO access via other means (like structure overlays) may result in an
oops.
Shared Memory Conversions
-=========================
+-------------------------
All TDX guest memory starts out as private at boot. This memory can not
be accessed by the hypervisor. However, some kernel users like device
Add documentation for TDX host kernel support. There is already one file Documentation/x86/tdx.rst containing documentation for TDX guest internals. Also reuse it for TDX host kernel support. Introduce a new level menu "TDX Guest Support" and move existing materials under it, and add a new menu for TDX host kernel support. Signed-off-by: Kai Huang <kai.huang@intel.com> --- Documentation/x86/tdx.rst | 169 +++++++++++++++++++++++++++++++++++--- 1 file changed, 158 insertions(+), 11 deletions(-)