| Message ID | 1589457511-4255-1-git-send-email-charante@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] mm, page_alloc: reset the zone->watermark_boost early | expand |
On 05/14/20 at 05:28pm, Charan Teja Reddy wrote: > Updating the zone watermarks by any means, like min_free_kbytes, > water_mark_scale_factor e.t.c, when ->watermark_boost is set will result > into the higher low and high watermarks than the user asked. > > Below are the steps pursued to reproduce the problem on system setup > of Android kernel running on Snapdragon hardware. > 1) Default settings of the system are as below: > #cat /proc/sys/vm/min_free_kbytes = 5162 > #cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node > Node 0, zone Normal > min 797 > low 8340 > high 8539 > > 2) Monitor the zone->watermark_boost(by adding a debug print in > the kernel) and whenever it is greater than zero value, write the > same value of min_free_kbytes obtained from step 1. > #echo 5162 > /proc/sys/vm/min_free_kbytes > > 3) Then read the zone watermarks in the system while the > ->watermark_boost is zero. This should show the same values of > watermarks as step 1 but shown a higher values than asked. > #cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node > Node 0, zone Normal > min 797 > low 21148 > high 21347 > > These higher values are because of updating the zone watermarks using > the macro min_wmark_pages(zone) which also adds the > zone->watermark_boost. > #define min_wmark_pages(z) (z->_watermark[WMARK_MIN] + > z->watermark_boost) > > So the steps that lead to the issue is like below: > 1) On the extfrag event, watermarks are boosted by storing the required > value in ->watermark_boost. > > 2) User tries to update the zone watermarks level in the system through > min_free_kbytes or watermark_scale_factor. > > 3) Later, when kswapd woke up, it resets the zone->watermark_boost to > zero. > > In step 2), we use the min_wmark_pages() macro to store the watermarks > in the zone structure thus the values are always offsetted by > ->watermark_boost value. This can be avoided by resetting the > ->watermark_boost to zero before it is used. > > Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> > --- > > v2: Improve the commit message > > v1: (https://patchwork.kernel.org/patch/11540751/) > > mm/page_alloc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/mm/page_alloc.c b/mm/page_alloc.c > index cef05d3..d001d61 100644 > --- a/mm/page_alloc.c > +++ b/mm/page_alloc.c > @@ -7761,9 +7761,9 @@ static void __setup_per_zone_wmarks(void) > mult_frac(zone_managed_pages(zone), > watermark_scale_factor, 10000)); > > + zone->watermark_boost = 0; > zone->_watermark[WMARK_LOW] = min_wmark_pages(zone) + tmp; > zone->_watermark[WMARK_HIGH] = min_wmark_pages(zone) + tmp * 2; > - zone->watermark_boost = 0; Yeah, watermark_boost is a temporary value which is used for reclaim, and will be reset after reclaim finished. Here we should respect the watermark setting from user. This fix looks good to me. Reviewed-by: Baoquan He <bhe@redhat.com> > > spin_unlock_irqrestore(&zone->lock, flags); > } > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a > member of the Code Aurora Forum, hosted by The Linux Foundation >
diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cef05d3..d001d61 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -7761,9 +7761,9 @@ static void __setup_per_zone_wmarks(void) mult_frac(zone_managed_pages(zone), watermark_scale_factor, 10000)); + zone->watermark_boost = 0; zone->_watermark[WMARK_LOW] = min_wmark_pages(zone) + tmp; zone->_watermark[WMARK_HIGH] = min_wmark_pages(zone) + tmp * 2; - zone->watermark_boost = 0; spin_unlock_irqrestore(&zone->lock, flags); }
Updating the zone watermarks by any means, like min_free_kbytes, water_mark_scale_factor e.t.c, when ->watermark_boost is set will result into the higher low and high watermarks than the user asked. Below are the steps pursued to reproduce the problem on system setup of Android kernel running on Snapdragon hardware. 1) Default settings of the system are as below: #cat /proc/sys/vm/min_free_kbytes = 5162 #cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node Node 0, zone Normal min 797 low 8340 high 8539 2) Monitor the zone->watermark_boost(by adding a debug print in the kernel) and whenever it is greater than zero value, write the same value of min_free_kbytes obtained from step 1. #echo 5162 > /proc/sys/vm/min_free_kbytes 3) Then read the zone watermarks in the system while the ->watermark_boost is zero. This should show the same values of watermarks as step 1 but shown a higher values than asked. #cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node Node 0, zone Normal min 797 low 21148 high 21347 These higher values are because of updating the zone watermarks using the macro min_wmark_pages(zone) which also adds the zone->watermark_boost. #define min_wmark_pages(z) (z->_watermark[WMARK_MIN] + z->watermark_boost) So the steps that lead to the issue is like below: 1) On the extfrag event, watermarks are boosted by storing the required value in ->watermark_boost. 2) User tries to update the zone watermarks level in the system through min_free_kbytes or watermark_scale_factor. 3) Later, when kswapd woke up, it resets the zone->watermark_boost to zero. In step 2), we use the min_wmark_pages() macro to store the watermarks in the zone structure thus the values are always offsetted by ->watermark_boost value. This can be avoided by resetting the ->watermark_boost to zero before it is used. Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> --- v2: Improve the commit message v1: (https://patchwork.kernel.org/patch/11540751/) mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)