@@ -2649,6 +2649,12 @@
noexec=on: enable non-executable mappings (default)
noexec=off: disable non-executable mappings
+ noibt [X86-64] Disable indirect branch tracking for user-mode
+ applications
+
+ noshstk [X86-64] Disable shadow stack support for user-mode
+ applications
+
nosmap [X86]
Disable SMAP (Supervisor Mode Access Prevention)
even if it is supported by processor.
new file mode 100644
@@ -0,0 +1,161 @@
+-----------------------------------------
+Control Flow Enforcement Technology (CET)
+-----------------------------------------
+
+[1] Overview
+
+Control Flow Enforcement Technology (CET) provides protection against
+return/jump-oriented programing (ROP) attacks. It can be implemented to
+protect both the kernel and applications. In the first phase, only the
+user-mode protection is implemented for the 64-bit kernel. Thirty-two bit
+applications are supported under the compatibility mode.
+
+CET includes shadow stack (SHSTK) and indirect branch tracking (IBT) and
+they are enabled from two kernel configuration options:
+
+ INTEL_X86_SHADOW_STACK_USER, and
+ INTEL_X86_BRANCH_TRACKING_USER.
+
+There are two command-line options for disabling CET features:
+
+ noshstk - disables shadow stack, and
+ noibt - disables indirect branch tracking.
+
+At run time, /proc/cpuinfo shows the availability of SHSTK and IBT.
+
+[2] Application Enabling
+
+The design of CET user-mode interface provides maximum overall coverage
+and compatibility with existing applications.
+
+To verify the CET capability of an application, use the following command
+and look for SHSTK/IBT in the NT_GNU_PROPERTY_TYPE_0 field:
+
+ readelf -n <application>
+
+CET features are opt-in by each application. To build a CET-capable
+application, the following tools are needed: Binutils v2.30, GCC v8.1,
+and GLIBC v2.29 (or later).
+
+If an application has CET capabilities, is statically linked, and the
+kernel supports CET, it will run with CET enabled. If an application
+needs any shared libraries, the loader checks all dependencies and enables
+CET only when all requirements are met. Once an application starts with
+CET enabled, the protection cannot be turned off until the next exec().
+
+[3] CET system calls
+
+The following arch_prctl() system calls are added for CET:
+
+(3a) arch_prctl(ARCH_CET_STATUS, unsigned long *addr)
+
+ Return CET feature status.
+
+ The parameter 'addr' is a pointer to a user buffer.
+ On returning to the caller, the kernel fills the following
+ information:
+
+ *addr = SHSTK/IBT status
+ *(addr + 1) = SHSTK/IBT default setting on exec()
+ *(addr + 2) = default SHSTK size on exec()
+
+(3b) arch_prctl(ARCH_CET_DISABLE, unsigned long features)
+
+ Disable SHSTK and/or IBT specified in 'features'. Return -EPERM
+ if CET is locked out.
+
+(3c) arch_prctl(ARCH_CET_LOCK)
+
+ Lock out CET features; disable turning off of SHSTK/IBT.
+
+(3d) arch_prctl(ARCH_CET_EXEC, unsigned long *addr)
+
+ Control how CET features should be enabled upon exec() a new
+ image.
+
+ The parameter 'addr' is a pointer to a user buffer.
+
+ *addr = a bitmap indicating which features are being changed
+ *(addr + 1) = how CET should be enabled upon exec().
+ 0: Check ELF header
+ 1: Always disable
+ 2: Always enable
+ *(addr + 2) = default SHSTK size on exec()
+
+(3e) arch_prctl(ARCH_CET_ALLOC_SHSTK, unsigned long *addr)
+
+ Allocate a new SHSTK.
+
+ The parameter 'addr' is a pointer to a user buffer and indicates
+ the desired SHSTK size to allocate. On returning to the caller
+ the buffer contains the address of the new SHSTK.
+
+(3f) arch_prctl(ARCH_CET_PUSH_SHSTK, unsigned long *addr)
+
+ Push a value onto the SHSTK.
+
+ The parameter 'addr' is a pointer to a user buffer.
+
+ *addr = the SHSTK pointer
+ *(addr + 1) = the value to push (a function return address)
+
+Note: ARCH_CET_ALLOC_SHSTK and ARCH_CET_PUSH_SHSTK are intended for
+ the implementation of GLIBC getcontext(), setcontext(),
+ makecontext(), and swapcontext().
+
+(3g) arch_prctl(ARCH_CET_LEGACY_BITMAP, unsigned long *addr)
+
+ If the current task does not have a legacy bitmap, setup one.
+ Return bitmap information as the following:
+
+ *addr = bitmap base address
+ *(addr + 1) = bitmap size
+
+[4] The implementation of the SHSTK
+
+A task's SHSTK is allocated from memory to a fixed size that can
+support 32 KB nested function calls; that is 256 KB for a 64-bit
+application and 128 KB for a 32-bit application. The system admin
+can change the size with the CET command line utility.
+
+The main program and its signal handlers use the same shadow stack.
+
+The SHSTK's vma has VM_SHSTK flag set; its PTEs are required to be
+read-only and dirty. When a SHSTK PTE is not present, RO, and dirty,
+a SHSTK access triggers a page fault with an additional SHSTK bit set
+in the page fault error code.
+
+When a task forks a child, its SHSTK PTEs are copied and both the
+parent's and the child's SHSTK PTEs are cleared of the dirty bit.
+Upon the next SHSTK access, the resulting SHSTK page fault is handled
+by page copy/re-use.
+
+When a pthread child is created, a separate SHSTK is created for the
+child.
+
+[5] The management of read-only & dirty PTEs for SHSTK
+
+A RO and dirty PTE exists in the following cases:
+
+(5a) A page is modified and then shared with a fork()'ed child;
+(5b) access_remote_vm with (FOLL_WRITE | FOLL_FORCE) on a RO page;
+(5c) A SHSTK page.
+
+The processor does not read the dirty bit for (5a) and (5b), but
+checks the dirty bit for (5c). To prevent accidental use of non-
+SHSTK memory as SHSTK, we introduce the use of a spare bit of the
+64-bit PTE as _PAGE_BIT_DIRTY_SW and exchange it with the dirty
+bit for (5a) and (5b). This results to the following possible
+PTE settings:
+
+Modified PTE: (R/W + DIRTY_HW)
+Modified and shared PTE: (R/O + DIRTY_SW)
+R/O PTE was (FOLL_FORCE | FOLL_WRITE): (R/O + DIRTY_SW)
+SHSTK stack PTE: (R/O + DIRTY_HW)
+Shared SHSTK PTE: (R/O + DIRTY_SW)
+
+[6] The implementation of IBT
+
+The kernel provides IBT support in mmap() of the legacy code bit map.
+However, the management of the bitmap is done in the GLIBC or the
+application.
Explain how CET works and the noshstk/noibt kernel parameters. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> --- Documentation/admin-guide/kernel-parameters.txt | 6 + Documentation/x86/intel_cet.txt | 161 ++++++++++++++++++++++++ 2 files changed, 167 insertions(+) create mode 100644 Documentation/x86/intel_cet.txt