diff mbox series

[v2,3/3] x86/kasan: support KASAN_VMALLOC

Message ID 20190729142108.23343-4-dja@axtens.net (mailing list archive)
State New, archived
Headers show
Series kasan: support backing vmalloc space with real shadow memory | expand

Commit Message

Daniel Axtens July 29, 2019, 2:21 p.m. UTC
In the case where KASAN directly allocates memory to back vmalloc
space, don't map the early shadow page over it.

We prepopulate pgds/p4ds for the range that would otherwise be empty.
This is required to get it synced to hardware on boot, allowing the
lower levels of the page tables to be filled dynamically.

Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>

---

v2: move from faulting in shadow pgds to prepopulating
---
 arch/x86/Kconfig            |  1 +
 arch/x86/mm/kasan_init_64.c | 61 +++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)
diff mbox series

Patch

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 222855cc0158..40562cc3771f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -134,6 +134,7 @@  config X86
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KASAN			if X86_64
+	select HAVE_ARCH_KASAN_VMALLOC		if X86_64
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS		if MMU
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if MMU && COMPAT
diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index 296da58f3013..2f57c4ddff61 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -245,6 +245,52 @@  static void __init kasan_map_early_shadow(pgd_t *pgd)
 	} while (pgd++, addr = next, addr != end);
 }
 
+static void __init kasan_shallow_populate_p4ds(pgd_t *pgd,
+		unsigned long addr,
+		unsigned long end,
+		int nid)
+{
+	p4d_t *p4d;
+	unsigned long next;
+	void *p;
+
+	p4d = p4d_offset(pgd, addr);
+	do {
+		next = p4d_addr_end(addr, end);
+
+		if (p4d_none(*p4d)) {
+			p = early_alloc(PAGE_SIZE, nid, true);
+			p4d_populate(&init_mm, p4d, p);
+		}
+	} while (p4d++, addr = next, addr != end);
+}
+
+static void __init kasan_shallow_populate_pgds(void *start, void *end)
+{
+	unsigned long addr, next;
+	pgd_t *pgd;
+	void *p;
+	int nid = early_pfn_to_nid((unsigned long)start);
+
+	addr = (unsigned long)start;
+	pgd = pgd_offset_k(addr);
+	do {
+		next = pgd_addr_end(addr, (unsigned long)end);
+
+		if (pgd_none(*pgd)) {
+			p = early_alloc(PAGE_SIZE, nid, true);
+			pgd_populate(&init_mm, pgd, p);
+		}
+
+		/*
+		 * we need to populate p4ds to be synced when running in
+		 * four level mode - see sync_global_pgds_l4()
+		 */
+		kasan_shallow_populate_p4ds(pgd, addr, next, nid);
+	} while (pgd++, addr = next, addr != (unsigned long)end);
+}
+
+
 #ifdef CONFIG_KASAN_INLINE
 static int kasan_die_handler(struct notifier_block *self,
 			     unsigned long val,
@@ -352,9 +398,24 @@  void __init kasan_init(void)
 	shadow_cpu_entry_end = (void *)round_up(
 			(unsigned long)shadow_cpu_entry_end, PAGE_SIZE);
 
+	/*
+	 * If we're in full vmalloc mode, don't back vmalloc space with early
+	 * shadow pages. Instead, prepopulate pgds/p4ds so they are synced to
+	 * the global table and we can populate the lower levels on demand.
+	 */
+#ifdef CONFIG_KASAN_VMALLOC
+	kasan_shallow_populate_pgds(
+		kasan_mem_to_shadow((void *)PAGE_OFFSET + MAXMEM),
+		kasan_mem_to_shadow((void *)VMALLOC_END));
+
+	kasan_populate_early_shadow(
+		kasan_mem_to_shadow((void *)VMALLOC_END + 1),
+		shadow_cpu_entry_begin);
+#else
 	kasan_populate_early_shadow(
 		kasan_mem_to_shadow((void *)PAGE_OFFSET + MAXMEM),
 		shadow_cpu_entry_begin);
+#endif
 
 	kasan_populate_shadow((unsigned long)shadow_cpu_entry_begin,
 			      (unsigned long)shadow_cpu_entry_end, 0);