diff mbox series

[34/86] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro

Message ID 20191205005132.a88MdiufF%akpm@linux-foundation.org (mailing list archive)
State New, archived
Headers show
Series [01/86] mm/kasan/common.c: fix compile error | expand

Commit Message

Andrew Morton Dec. 5, 2019, 12:51 a.m. UTC 
From: William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro

Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
bitmap_get_value8 functions, where appropriate.  In addition, remove the
now unnecessary temp_mask and temp_shift members of the
intel_soc_dts_sensor_entry structure.

Link: http://lkml.kernel.org/r/2d3c74e9a00a52954f31d19e04623a7f4bc85520.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/thermal/intel/intel_soc_dts_iosf.c |   31 +++++++++++--------
 drivers/thermal/intel/intel_soc_dts_iosf.h |    2 -
 2 files changed, 18 insertions(+), 15 deletions(-)
diff mbox series

Patch

--- a/drivers/thermal/intel/intel_soc_dts_iosf.c~thermal-intel-intel_soc_dts_iosf-utilize-for_each_set_clump8-macro
+++ a/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -6,6 +6,7 @@ 
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -103,6 +104,7 @@  static int update_trip_temp(struct intel
 	int status;
 	u32 temp_out;
 	u32 out;
+	unsigned long update_ptps;
 	u32 store_ptps;
 	u32 store_ptmc;
 	u32 store_te_out;
@@ -120,8 +122,10 @@  static int update_trip_temp(struct intel
 	if (status)
 		return status;
 
-	out = (store_ptps & ~(0xFF << (thres_index * 8)));
-	out |= (temp_out & 0xFF) << (thres_index * 8);
+	update_ptps = store_ptps;
+	bitmap_set_value8(&update_ptps, temp_out & 0xFF, thres_index * 8);
+	out = update_ptps;
+
 	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_OFFSET_PTPS, out);
 	if (status)
@@ -223,6 +227,7 @@  static int sys_get_curr_temp(struct ther
 	u32 out;
 	struct intel_soc_dts_sensor_entry *dts;
 	struct intel_soc_dts_sensors *sensors;
+	unsigned long raw;
 
 	dts = tzd->devdata;
 	sensors = dts->sensors;
@@ -231,8 +236,8 @@  static int sys_get_curr_temp(struct ther
 	if (status)
 		return status;
 
-	out = (out & dts->temp_mask) >> dts->temp_shift;
-	out -= SOC_DTS_TJMAX_ENCODING;
+	raw = out;
+	out = bitmap_get_value8(&raw, dts->id * 8) - SOC_DTS_TJMAX_ENCODING;
 	*temp = sensors->tj_max - out * 1000;
 
 	return 0;
@@ -280,11 +285,14 @@  static int add_dts_thermal_zone(int id,
 				int read_only_trip_cnt)
 {
 	char name[10];
+	unsigned long trip;
 	int trip_count = 0;
 	int trip_mask = 0;
+	int writable_trip_cnt = 0;
+	unsigned long ptps;
 	u32 store_ptps;
+	unsigned long i;
 	int ret;
-	int i;
 
 	/* Store status to restor on exit */
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
@@ -293,11 +301,10 @@  static int add_dts_thermal_zone(int id,
 		goto err_ret;
 
 	dts->id = id;
-	dts->temp_mask = 0x00FF << (id * 8);
-	dts->temp_shift = id * 8;
 	if (notification_support) {
 		trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
-		trip_mask = BIT(trip_count - read_only_trip_cnt) - 1;
+		writable_trip_cnt = trip_count - read_only_trip_cnt;
+		trip_mask = GENMASK(writable_trip_cnt - 1, 0);
 	}
 
 	/* Check if the writable trip we provide is not used by BIOS */
@@ -306,11 +313,9 @@  static int add_dts_thermal_zone(int id,
 	if (ret)
 		trip_mask = 0;
 	else {
-		for (i = 0; i < trip_count; ++i) {
-			if (trip_mask & BIT(i))
-				if (store_ptps & (0xff << (i * 8)))
-					trip_mask &= ~BIT(i);
-		}
+		ptps = store_ptps;
+		for_each_set_clump8(i, trip, &ptps, writable_trip_cnt * 8)
+			trip_mask &= ~BIT(i / 8);
 	}
 	dts->trip_mask = trip_mask;
 	dts->trip_count = trip_count;
--- a/drivers/thermal/intel/intel_soc_dts_iosf.h~thermal-intel-intel_soc_dts_iosf-utilize-for_each_set_clump8-macro
+++ a/drivers/thermal/intel/intel_soc_dts_iosf.h
@@ -24,8 +24,6 @@  struct intel_soc_dts_sensors;
 
 struct intel_soc_dts_sensor_entry {
 	int id;
-	u32 temp_mask;
-	u32 temp_shift;
 	u32 store_status;
 	u32 trip_mask;
 	u32 trip_count;