| Message ID | 20191217231615.164161-8-almasrymina@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v9,1/8] hugetlb_cgroup: Add hugetlb_cgroup reservation counter | expand |
On Tue, 17 Dec 2019, Mina Almasry wrote: > diff --git a/Documentation/admin-guide/cgroup-v1/hugetlb.rst b/Documentation/admin-guide/cgroup-v1/hugetlb.rst > index a3902aa253a96..efb94e4db9d5a 100644 > --- a/Documentation/admin-guide/cgroup-v1/hugetlb.rst > +++ b/Documentation/admin-guide/cgroup-v1/hugetlb.rst > @@ -2,13 +2,6 @@ > HugeTLB Controller > ================== > > -The HugeTLB controller allows to limit the HugeTLB usage per control group and > -enforces the controller limit during page fault. Since HugeTLB doesn't > -support page reclaim, enforcing the limit at page fault time implies that, > -the application will get SIGBUS signal if it tries to access HugeTLB pages > -beyond its limit. This requires the application to know beforehand how much > -HugeTLB pages it would require for its use. > - > HugeTLB controller can be created by first mounting the cgroup filesystem. > > # mount -t cgroup -o hugetlb none /sys/fs/cgroup > @@ -28,10 +21,14 @@ process (bash) into it. > > Brief summary of control files:: > > - hugetlb.<hugepagesize>.limit_in_bytes # set/show limit of "hugepagesize" hugetlb usage > - hugetlb.<hugepagesize>.max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded > - hugetlb.<hugepagesize>.usage_in_bytes # show current usage for "hugepagesize" hugetlb > - hugetlb.<hugepagesize>.failcnt # show the number of allocation failure due to HugeTLB limit > + hugetlb.<hugepagesize>.reservation_limit_in_bytes # set/show limit of "hugepagesize" hugetlb reservations > + hugetlb.<hugepagesize>.reservation_max_usage_in_bytes # show max "hugepagesize" hugetlb reservations and no-reserve faults. > + hugetlb.<hugepagesize>.reservation_usage_in_bytes # show current reservations and no-reserve faults for "hugepagesize" hugetlb > + hugetlb.<hugepagesize>.reservation_failcnt # show the number of allocation failure due to HugeTLB reservation limit > + hugetlb.<hugepagesize>.limit_in_bytes # set/show limit of "hugepagesize" hugetlb faults > + hugetlb.<hugepagesize>.max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded > + hugetlb.<hugepagesize>.usage_in_bytes # show current usage for "hugepagesize" hugetlb > + hugetlb.<hugepagesize>.failcnt # show the number of allocation failure due to HugeTLB usage limit > I assume these are better named hugetlb.<hugepagesize>.reservation.* rather than reservation_*, or perhaps shortened to resv.*, so for example hugetlb.<hugepagesize>.resv.limit_in_bytes. > For a system supporting three hugepage sizes (64k, 32M and 1G), the control > files include:: > @@ -40,11 +37,56 @@ files include:: > hugetlb.1GB.max_usage_in_bytes > hugetlb.1GB.usage_in_bytes > hugetlb.1GB.failcnt > + hugetlb.1GB.reservation_limit_in_bytes > + hugetlb.1GB.reservation_max_usage_in_bytes > + hugetlb.1GB.reservation_usage_in_bytes > + hugetlb.1GB.reservation_failcnt > hugetlb.64KB.limit_in_bytes > hugetlb.64KB.max_usage_in_bytes > hugetlb.64KB.usage_in_bytes > hugetlb.64KB.failcnt > + hugetlb.64KB.reservation_limit_in_bytes > + hugetlb.64KB.reservation_max_usage_in_bytes > + hugetlb.64KB.reservation_usage_in_bytes > + hugetlb.64KB.reservation_failcnt > hugetlb.32MB.limit_in_bytes > hugetlb.32MB.max_usage_in_bytes > hugetlb.32MB.usage_in_bytes > hugetlb.32MB.failcnt > + hugetlb.32MB.reservation_limit_in_bytes > + hugetlb.32MB.reservation_max_usage_in_bytes > + hugetlb.32MB.reservation_usage_in_bytes > + hugetlb.32MB.reservation_failcnt > + > + > +1. Reservation limits Should probably be described after the page fault limits since those are the canonical limits that already exist and the "reservation_.*" equivalents are supplementary. > + > +The HugeTLB controller allows to limit the HugeTLB reservations per control > +group and enforces the controller limit at reservation time and at the fault of > +hugetlb memory for which no reservation exists. Reservation limits > +are superior to Page fault limits (see section 2), since Reservation limits are > +enforced at reservation time (on mmap or shget), and never causes the > +application to get SIGBUS signal if the memory was reserved before hand. For > +MAP_NORESERVE allocations, the reservation limit behaves the same as the fault > +limit, enforcing memory usage at fault time and causing the application to > +receive a SIGBUS if it's crossing its limit. > + When saying that reservation limits are superior to page fault limits, it might be helpful to expand on the downsides of page fault limits. The existing documentation calls out that the application needs to know its expected usage; it does not call attention to the fact that several different applications may be accessing an overcommited system-wide pool of hugetlb memory. So it might be possible that the application understands its own usage but it may not understand how that is orchestrated with other applications on the same system accessing a shared pool of hugetlb pages. But yes, I think MAP_FAILED and allow for fallback or freeing of hugetlb memory is far superior to SIGBUS :) > +2. Page fault limits > + > +The HugeTLB controller allows to limit the HugeTLB usage (page fault) per > +control group and enforces the controller limit during page fault. Since HugeTLB > +doesn't support page reclaim, enforcing the limit at page fault time implies > +that, the application will get SIGBUS signal if it tries to access HugeTLB > +pages beyond its limit. This requires the application to know beforehand how > +much HugeTLB pages it would require for its use. > + > + > +3. Caveats with shared memory > + > +For shared hugetlb memory, both hugetlb reservation and page faults are charged > +to the first task that causes the memory to be reserved or faulted, and all > +subsequent uses of this reserved or faulted memory is done without charging. > + > +Shared hugetlb memory is only uncharged when it is unreserved or deallocated. > +This is usually when the hugetlbfs file is deleted, and not when the task that > +caused the reservation or fault has exited. Discussion of reparenting?
diff --git a/Documentation/admin-guide/cgroup-v1/hugetlb.rst b/Documentation/admin-guide/cgroup-v1/hugetlb.rst index a3902aa253a96..efb94e4db9d5a 100644 --- a/Documentation/admin-guide/cgroup-v1/hugetlb.rst +++ b/Documentation/admin-guide/cgroup-v1/hugetlb.rst @@ -2,13 +2,6 @@ HugeTLB Controller ================== -The HugeTLB controller allows to limit the HugeTLB usage per control group and -enforces the controller limit during page fault. Since HugeTLB doesn't -support page reclaim, enforcing the limit at page fault time implies that, -the application will get SIGBUS signal if it tries to access HugeTLB pages -beyond its limit. This requires the application to know beforehand how much -HugeTLB pages it would require for its use. - HugeTLB controller can be created by first mounting the cgroup filesystem. # mount -t cgroup -o hugetlb none /sys/fs/cgroup @@ -28,10 +21,14 @@ process (bash) into it. Brief summary of control files:: - hugetlb.<hugepagesize>.limit_in_bytes # set/show limit of "hugepagesize" hugetlb usage - hugetlb.<hugepagesize>.max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded - hugetlb.<hugepagesize>.usage_in_bytes # show current usage for "hugepagesize" hugetlb - hugetlb.<hugepagesize>.failcnt # show the number of allocation failure due to HugeTLB limit + hugetlb.<hugepagesize>.reservation_limit_in_bytes # set/show limit of "hugepagesize" hugetlb reservations + hugetlb.<hugepagesize>.reservation_max_usage_in_bytes # show max "hugepagesize" hugetlb reservations and no-reserve faults. + hugetlb.<hugepagesize>.reservation_usage_in_bytes # show current reservations and no-reserve faults for "hugepagesize" hugetlb + hugetlb.<hugepagesize>.reservation_failcnt # show the number of allocation failure due to HugeTLB reservation limit + hugetlb.<hugepagesize>.limit_in_bytes # set/show limit of "hugepagesize" hugetlb faults + hugetlb.<hugepagesize>.max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded + hugetlb.<hugepagesize>.usage_in_bytes # show current usage for "hugepagesize" hugetlb + hugetlb.<hugepagesize>.failcnt # show the number of allocation failure due to HugeTLB usage limit For a system supporting three hugepage sizes (64k, 32M and 1G), the control files include:: @@ -40,11 +37,56 @@ files include:: hugetlb.1GB.max_usage_in_bytes hugetlb.1GB.usage_in_bytes hugetlb.1GB.failcnt + hugetlb.1GB.reservation_limit_in_bytes + hugetlb.1GB.reservation_max_usage_in_bytes + hugetlb.1GB.reservation_usage_in_bytes + hugetlb.1GB.reservation_failcnt hugetlb.64KB.limit_in_bytes hugetlb.64KB.max_usage_in_bytes hugetlb.64KB.usage_in_bytes hugetlb.64KB.failcnt + hugetlb.64KB.reservation_limit_in_bytes + hugetlb.64KB.reservation_max_usage_in_bytes + hugetlb.64KB.reservation_usage_in_bytes + hugetlb.64KB.reservation_failcnt hugetlb.32MB.limit_in_bytes hugetlb.32MB.max_usage_in_bytes hugetlb.32MB.usage_in_bytes hugetlb.32MB.failcnt + hugetlb.32MB.reservation_limit_in_bytes + hugetlb.32MB.reservation_max_usage_in_bytes + hugetlb.32MB.reservation_usage_in_bytes + hugetlb.32MB.reservation_failcnt + + +1. Reservation limits + +The HugeTLB controller allows to limit the HugeTLB reservations per control +group and enforces the controller limit at reservation time and at the fault of +hugetlb memory for which no reservation exists. Reservation limits +are superior to Page fault limits (see section 2), since Reservation limits are +enforced at reservation time (on mmap or shget), and never causes the +application to get SIGBUS signal if the memory was reserved before hand. For +MAP_NORESERVE allocations, the reservation limit behaves the same as the fault +limit, enforcing memory usage at fault time and causing the application to +receive a SIGBUS if it's crossing its limit. + +2. Page fault limits + +The HugeTLB controller allows to limit the HugeTLB usage (page fault) per +control group and enforces the controller limit during page fault. Since HugeTLB +doesn't support page reclaim, enforcing the limit at page fault time implies +that, the application will get SIGBUS signal if it tries to access HugeTLB +pages beyond its limit. This requires the application to know beforehand how +much HugeTLB pages it would require for its use. + + +3. Caveats with shared memory + +For shared hugetlb memory, both hugetlb reservation and page faults are charged +to the first task that causes the memory to be reserved or faulted, and all +subsequent uses of this reserved or faulted memory is done without charging. + +Shared hugetlb memory is only uncharged when it is unreserved or deallocated. +This is usually when the hugetlbfs file is deleted, and not when the task that +caused the reservation or fault has exited.