@@ -278,6 +278,13 @@ config ZLIB_DEFLATE
tristate
select BITREVERSE
+config ZLIB_DFLTCC
+ def_bool y
+ depends on S390
+ prompt "Enable s390x DEFLATE CONVERSION CALL support for kernel zlib"
+ help
+ Enable s390x hardware support for zlib in the kernel.
+
config LZO_COMPRESS
tristate
@@ -140,6 +140,7 @@ obj-$(CONFIG_842_COMPRESS) += 842/
obj-$(CONFIG_842_DECOMPRESS) += 842/
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
+obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_BCH) += bch.o
obj-$(CONFIG_LZO_COMPRESS) += lzo/
@@ -52,16 +52,18 @@
#include <linux/zutil.h>
#include "defutil.h"
+/* architecture-specific bits */
+#ifdef CONFIG_ZLIB_DFLTCC
+# include "../zlib_dfltcc/dfltcc.h"
+#else
+#define DEFLATE_RESET_HOOK(strm) do {} while (0)
+#define DEFLATE_HOOK(strm, flush, bstate) 0
+#define DEFLATE_NEED_CHECKSUM(strm) 1
+#endif
/* ===========================================================================
* Function prototypes.
*/
-typedef enum {
- need_more, /* block not completed, need more input or more output */
- block_done, /* block flush performed */
- finish_started, /* finish started, need only more output at next deflate */
- finish_done /* finish done, accept no more input or output */
-} block_state;
typedef block_state (*compress_func) (deflate_state *s, int flush);
/* Compression function. Returns the block state after the call. */
@@ -72,7 +74,6 @@ static block_state deflate_fast (defla
static block_state deflate_slow (deflate_state *s, int flush);
static void lm_init (deflate_state *s);
static void putShortMSB (deflate_state *s, uInt b);
-static void flush_pending (z_streamp strm);
static int read_buf (z_streamp strm, Byte *buf, unsigned size);
static uInt longest_match (deflate_state *s, IPos cur_match);
@@ -98,6 +99,25 @@ static void check_match (deflate_state
* See deflate.c for comments about the MIN_MATCH+1.
*/
+/* Workspace to be allocated for deflate processing */
+typedef struct deflate_workspace {
+ /* State memory for the deflator */
+ deflate_state deflate_memory;
+#ifdef CONFIG_ZLIB_DFLTCC
+ /* State memory for s390 hardware deflate */
+ struct dfltcc_state dfltcc_memory;
+#endif
+ Byte *window_memory;
+ Pos *prev_memory;
+ Pos *head_memory;
+ char *overlay_memory;
+} deflate_workspace;
+
+#ifdef CONFIG_ZLIB_DFLTCC
+/* dfltcc_state must be doubleword aligned for DFLTCC call */
+static_assert(offsetof(struct deflate_workspace, dfltcc_memory) % 8 == 0);
+#endif
+
/* Values for max_lazy_match, good_match and max_chain_length, depending on
* the desired pack level (0..9). The values given below have been tuned to
* exclude worst case performance for pathological files. Better values may be
@@ -207,7 +227,15 @@ int zlib_deflateInit2(
*/
next = (char *) mem;
next += sizeof(*mem);
+#ifdef CONFIG_ZLIB_DFLTCC
+ /*
+ * DFLTCC requires the window to be page aligned.
+ * Thus, we overallocate and take the aligned portion of the buffer.
+ */
+ mem->window_memory = (Byte *) PTR_ALIGN(next, PAGE_SIZE);
+#else
mem->window_memory = (Byte *) next;
+#endif
next += zlib_deflate_window_memsize(windowBits);
mem->prev_memory = (Pos *) next;
next += zlib_deflate_prev_memsize(windowBits);
@@ -277,6 +305,8 @@ int zlib_deflateReset(
zlib_tr_init(s);
lm_init(s);
+ DEFLATE_RESET_HOOK(strm);
+
return Z_OK;
}
@@ -294,35 +324,6 @@ static void putShortMSB(
put_byte(s, (Byte)(b & 0xff));
}
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-static void flush_pending(
- z_streamp strm
-)
-{
- deflate_state *s = (deflate_state *) strm->state;
- unsigned len = s->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- if (strm->next_out != NULL) {
- memcpy(strm->next_out, s->pending_out, len);
- strm->next_out += len;
- }
- s->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- s->pending -= len;
- if (s->pending == 0) {
- s->pending_out = s->pending_buf;
- }
-}
-
/* ========================================================================= */
int zlib_deflate(
z_streamp strm,
@@ -404,7 +405,8 @@ int zlib_deflate(
(flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
block_state bstate;
- bstate = (*(configuration_table[s->level].func))(s, flush);
+ bstate = DEFLATE_HOOK(strm, flush, &bstate) ? bstate :
+ (*(configuration_table[s->level].func))(s, flush);
if (bstate == finish_started || bstate == finish_done) {
s->status = FINISH_STATE;
@@ -503,7 +505,8 @@ static int read_buf(
strm->avail_in -= len;
- if (!((deflate_state *)(strm->state))->noheader) {
+ if (!DEFLATE_NEED_CHECKSUM(strm)) {}
+ else if (!((deflate_state *)(strm->state))->noheader) {
strm->adler = zlib_adler32(strm->adler, strm->next_in, len);
}
memcpy(buf, strm->next_in, len);
@@ -76,11 +76,6 @@ static const uch bl_order[BL_CODES]
* probability, to avoid transmitting the lengths for unused bit length codes.
*/
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
/* ===========================================================================
* Local data. These are initialized only once.
*/
@@ -147,7 +142,6 @@ static void send_all_trees (deflate_stat
static void compress_block (deflate_state *s, ct_data *ltree,
ct_data *dtree);
static void set_data_type (deflate_state *s);
-static void bi_windup (deflate_state *s);
static void bi_flush (deflate_state *s);
static void copy_block (deflate_state *s, char *buf, unsigned len,
int header);
@@ -170,54 +164,6 @@ static void copy_block (deflate_stat
*/
/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-static void send_bits (deflate_state *s, int value, int length);
-
-static void send_bits(
- deflate_state *s,
- int value, /* value to send */
- int length /* number of bits */
-)
-{
- Tracevv((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
- if (s->bi_valid > (int)Buf_size - len) {\
- int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
- put_short(s, s->bi_buf);\
- s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
- s->bi_valid += len - Buf_size;\
- } else {\
- s->bi_buf |= (value) << s->bi_valid;\
- s->bi_valid += len;\
- }\
-}
-#endif /* DEBUG_ZLIB */
-
-/* ===========================================================================
* Initialize the various 'constant' tables. In a multi-threaded environment,
* this function may be called by two threads concurrently, but this is
* harmless since both invocations do exactly the same thing.
@@ -1,5 +1,7 @@
+#ifndef DEFUTIL_H
+#define DEFUTIL_H
-
+#include <linux/zutil.h>
#define Assert(err, str)
#define Trace(dummy)
@@ -238,17 +240,13 @@ typedef struct deflate_state {
} deflate_state;
-typedef struct deflate_workspace {
- /* State memory for the deflator */
- deflate_state deflate_memory;
- Byte *window_memory;
- Pos *prev_memory;
- Pos *head_memory;
- char *overlay_memory;
-} deflate_workspace;
-
+#ifdef CONFIG_ZLIB_DFLTCC
+#define zlib_deflate_window_memsize(windowBits) \
+ (2 * (1 << (windowBits)) * sizeof(Byte) + PAGE_SIZE)
+#else
#define zlib_deflate_window_memsize(windowBits) \
(2 * (1 << (windowBits)) * sizeof(Byte))
+#endif
#define zlib_deflate_prev_memsize(windowBits) \
((1 << (windowBits)) * sizeof(Pos))
#define zlib_deflate_head_memsize(memLevel) \
@@ -293,6 +291,24 @@ void zlib_tr_stored_type_only (deflate_s
}
/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+static inline unsigned bi_reverse(
+ unsigned code, /* the value to invert */
+ int len /* its bit length */
+)
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
* Flush the bit buffer, keeping at most 7 bits in it.
*/
static inline void bi_flush(deflate_state *s)
@@ -325,3 +341,101 @@ static inline void bi_windup(deflate_sta
#endif
}
+typedef enum {
+ need_more, /* block not completed, need more input or more output */
+ block_done, /* block flush performed */
+ finish_started, /* finish started, need only more output at next deflate */
+ finish_done /* finish done, accept no more input or output */
+} block_state;
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG_ZLIB
+static void send_bits (deflate_state *s, int value, int length);
+
+static void send_bits(
+ deflate_state *s,
+ int value, /* value to send */
+ int length /* number of bits */
+)
+{
+ Tracevv((stderr," l %2d v %4x ", length, value));
+ Assert(length > 0 && length <= 15, "invalid length");
+ s->bits_sent += (ulg)length;
+
+ /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+ * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+ * unused bits in value.
+ */
+ if (s->bi_valid > (int)Buf_size - length) {
+ s->bi_buf |= (value << s->bi_valid);
+ put_short(s, s->bi_buf);
+ s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+ s->bi_valid += length - Buf_size;
+ } else {
+ s->bi_buf |= value << s->bi_valid;
+ s->bi_valid += length;
+ }
+}
+#else /* !DEBUG_ZLIB */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+ if (s->bi_valid > (int)Buf_size - len) {\
+ int val = value;\
+ s->bi_buf |= (val << s->bi_valid);\
+ put_short(s, s->bi_buf);\
+ s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+ s->bi_valid += len - Buf_size;\
+ } else {\
+ s->bi_buf |= (value) << s->bi_valid;\
+ s->bi_valid += len;\
+ }\
+}
+#endif /* DEBUG_ZLIB */
+
+static inline void zlib_tr_send_bits(
+ deflate_state *s,
+ int value,
+ int length
+)
+{
+ send_bits(s, value, length);
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+static inline void flush_pending(
+ z_streamp strm
+)
+{
+ deflate_state *s = (deflate_state *) strm->state;
+ unsigned len = s->pending;
+
+ if (len > strm->avail_out) len = strm->avail_out;
+ if (len == 0) return;
+
+ if (strm->next_out != NULL) {
+ memcpy(strm->next_out, s->pending_out, len);
+ strm->next_out += len;
+ }
+ s->pending_out += len;
+ strm->total_out += len;
+ strm->avail_out -= len;
+ s->pending -= len;
+ if (s->pending == 0) {
+ s->pending_out = s->pending_buf;
+ }
+}
+#endif /* DEFUTIL_H */
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: Zlib
+/* dfltcc.c - SystemZ DEFLATE CONVERSION CALL support. */
+
+#include <linux/zutil.h>
+#include "dfltcc_util.h"
+#include "dfltcc.h"
+
+char *oesc_msg(
+ char *buf,
+ int oesc
+)
+{
+ if (oesc == 0x00)
+ return NULL; /* Successful completion */
+ else {
+#ifdef STATIC
+ return NULL; /* Ignore for pre-boot decompressor */
+#else
+ sprintf(buf, "Operation-Ending-Supplemental Code is 0x%.2X", oesc);
+ return buf;
+#endif
+ }
+}
+
+void dfltcc_reset(
+ z_streamp strm,
+ uInt size
+)
+{
+ struct dfltcc_state *dfltcc_state =
+ (struct dfltcc_state *)((char *)strm->state + size);
+ struct dfltcc_qaf_param *param =
+ (struct dfltcc_qaf_param *)&dfltcc_state->param;
+
+ /* Initialize available functions */
+ if (is_dfltcc_enabled()) {
+ dfltcc(DFLTCC_QAF, param, NULL, NULL, NULL, NULL, NULL);
+ memmove(&dfltcc_state->af, param, sizeof(dfltcc_state->af));
+ } else
+ memset(&dfltcc_state->af, 0, sizeof(dfltcc_state->af));
+
+ /* Initialize parameter block */
+ memset(&dfltcc_state->param, 0, sizeof(dfltcc_state->param));
+ dfltcc_state->param.nt = 1;
+
+ /* Initialize tuning parameters */
+ dfltcc_state->level_mask = DFLTCC_LEVEL_MASK;
+ dfltcc_state->block_size = DFLTCC_BLOCK_SIZE;
+ dfltcc_state->block_threshold = DFLTCC_FIRST_FHT_BLOCK_SIZE;
+ dfltcc_state->dht_threshold = DFLTCC_DHT_MIN_SAMPLE_SIZE;
+ dfltcc_state->param.ribm = DFLTCC_RIBM;
+}
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: Zlib
+
+#include "../zlib_deflate/defutil.h"
+#include "dfltcc_util.h"
+#include "dfltcc.h"
+#include <linux/zutil.h>
+
+/*
+ * Compress.
+ */
+int dfltcc_can_deflate(
+ z_streamp strm
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+
+ /* Unsupported compression settings */
+ if (!dfltcc_are_params_ok(state->level, state->w_bits, state->strategy,
+ dfltcc_state->level_mask))
+ return 0;
+
+ /* Unsupported hardware */
+ if (!is_bit_set(dfltcc_state->af.fns, DFLTCC_GDHT) ||
+ !is_bit_set(dfltcc_state->af.fns, DFLTCC_CMPR) ||
+ !is_bit_set(dfltcc_state->af.fmts, DFLTCC_FMT0))
+ return 0;
+
+ return 1;
+}
+
+static void dfltcc_gdht(
+ z_streamp strm
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
+ size_t avail_in = avail_in = strm->avail_in;
+
+ dfltcc(DFLTCC_GDHT,
+ param, NULL, NULL,
+ &strm->next_in, &avail_in, NULL);
+}
+
+static dfltcc_cc dfltcc_cmpr(
+ z_streamp strm
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
+ size_t avail_in = strm->avail_in;
+ size_t avail_out = strm->avail_out;
+ dfltcc_cc cc;
+
+ cc = dfltcc(DFLTCC_CMPR | HBT_CIRCULAR,
+ param, &strm->next_out, &avail_out,
+ &strm->next_in, &avail_in, state->window);
+ strm->total_in += (strm->avail_in - avail_in);
+ strm->total_out += (strm->avail_out - avail_out);
+ strm->avail_in = avail_in;
+ strm->avail_out = avail_out;
+ return cc;
+}
+
+static void send_eobs(
+ z_streamp strm,
+ const struct dfltcc_param_v0 *param
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+
+ zlib_tr_send_bits(
+ state,
+ bi_reverse(param->eobs >> (15 - param->eobl), param->eobl),
+ param->eobl);
+ flush_pending(strm);
+ if (state->pending != 0) {
+ /* The remaining data is located in pending_out[0:pending]. If someone
+ * calls put_byte() - this might happen in deflate() - the byte will be
+ * placed into pending_buf[pending], which is incorrect. Move the
+ * remaining data to the beginning of pending_buf so that put_byte() is
+ * usable again.
+ */
+ memmove(state->pending_buf, state->pending_out, state->pending);
+ state->pending_out = state->pending_buf;
+ }
+#ifdef ZLIB_DEBUG
+ state->compressed_len += param->eobl;
+#endif
+}
+
+int dfltcc_deflate(
+ z_streamp strm,
+ int flush,
+ block_state *result
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+ struct dfltcc_param_v0 *param = &dfltcc_state->param;
+ uInt masked_avail_in;
+ dfltcc_cc cc;
+ int need_empty_block;
+ int soft_bcc;
+ int no_flush;
+
+ if (!dfltcc_can_deflate(strm))
+ return 0;
+
+again:
+ masked_avail_in = 0;
+ soft_bcc = 0;
+ no_flush = flush == Z_NO_FLUSH;
+
+ /* Trailing empty block. Switch to software, except when Continuation Flag
+ * is set, which means that DFLTCC has buffered some output in the
+ * parameter block and needs to be called again in order to flush it.
+ */
+ if (flush == Z_FINISH && strm->avail_in == 0 && !param->cf) {
+ if (param->bcf) {
+ /* A block is still open, and the hardware does not support closing
+ * blocks without adding data. Thus, close it manually.
+ */
+ send_eobs(strm, param);
+ param->bcf = 0;
+ }
+ return 0;
+ }
+
+ if (strm->avail_in == 0 && !param->cf) {
+ *result = need_more;
+ return 1;
+ }
+
+ /* There is an open non-BFINAL block, we are not going to close it just
+ * yet, we have compressed more than DFLTCC_BLOCK_SIZE bytes and we see
+ * more than DFLTCC_DHT_MIN_SAMPLE_SIZE bytes. Open a new block with a new
+ * DHT in order to adapt to a possibly changed input data distribution.
+ */
+ if (param->bcf && no_flush &&
+ strm->total_in > dfltcc_state->block_threshold &&
+ strm->avail_in >= dfltcc_state->dht_threshold) {
+ if (param->cf) {
+ /* We need to flush the DFLTCC buffer before writing the
+ * End-of-block Symbol. Mask the input data and proceed as usual.
+ */
+ masked_avail_in += strm->avail_in;
+ strm->avail_in = 0;
+ no_flush = 0;
+ } else {
+ /* DFLTCC buffer is empty, so we can manually write the
+ * End-of-block Symbol right away.
+ */
+ send_eobs(strm, param);
+ param->bcf = 0;
+ dfltcc_state->block_threshold =
+ strm->total_in + dfltcc_state->block_size;
+ if (strm->avail_out == 0) {
+ *result = need_more;
+ return 1;
+ }
+ }
+ }
+
+ /* The caller gave us too much data. Pass only one block worth of
+ * uncompressed data to DFLTCC and mask the rest, so that on the next
+ * iteration we start a new block.
+ */
+ if (no_flush && strm->avail_in > dfltcc_state->block_size) {
+ masked_avail_in += (strm->avail_in - dfltcc_state->block_size);
+ strm->avail_in = dfltcc_state->block_size;
+ }
+
+ /* When we have an open non-BFINAL deflate block and caller indicates that
+ * the stream is ending, we need to close an open deflate block and open a
+ * BFINAL one.
+ */
+ need_empty_block = flush == Z_FINISH && param->bcf && !param->bhf;
+
+ /* Translate stream to parameter block */
+ param->cvt = CVT_ADLER32;
+ if (!no_flush)
+ /* We need to close a block. Always do this in software - when there is
+ * no input data, the hardware will not nohor BCC. */
+ soft_bcc = 1;
+ if (flush == Z_FINISH && !param->bcf)
+ /* We are about to open a BFINAL block, set Block Header Final bit
+ * until the stream ends.
+ */
+ param->bhf = 1;
+ /* DFLTCC-CMPR will write to next_out, so make sure that buffers with
+ * higher precedence are empty.
+ */
+ Assert(state->pending == 0, "There must be no pending bytes");
+ Assert(state->bi_valid < 8, "There must be less than 8 pending bits");
+ param->sbb = (unsigned int)state->bi_valid;
+ if (param->sbb > 0)
+ *strm->next_out = (Byte)state->bi_buf;
+ if (param->hl)
+ param->nt = 0; /* Honor history */
+ param->cv = strm->adler;
+
+ /* When opening a block, choose a Huffman-Table Type */
+ if (!param->bcf) {
+ if (strm->total_in == 0 && dfltcc_state->block_threshold > 0) {
+ param->htt = HTT_FIXED;
+ }
+ else {
+ param->htt = HTT_DYNAMIC;
+ dfltcc_gdht(strm);
+ }
+ }
+
+ /* Deflate */
+ do {
+ cc = dfltcc_cmpr(strm);
+ if (strm->avail_in < 4096 && masked_avail_in > 0)
+ /* We are about to call DFLTCC with a small input buffer, which is
+ * inefficient. Since there is masked data, there will be at least
+ * one more DFLTCC call, so skip the current one and make the next
+ * one handle more data.
+ */
+ break;
+ } while (cc == DFLTCC_CC_AGAIN);
+
+ /* Translate parameter block to stream */
+ strm->msg = oesc_msg(dfltcc_state->msg, param->oesc);
+ state->bi_valid = param->sbb;
+ if (state->bi_valid == 0)
+ state->bi_buf = 0; /* Avoid accessing next_out */
+ else
+ state->bi_buf = *strm->next_out & ((1 << state->bi_valid) - 1);
+ strm->adler = param->cv;
+
+ /* Unmask the input data */
+ strm->avail_in += masked_avail_in;
+ masked_avail_in = 0;
+
+ /* If we encounter an error, it means there is a bug in DFLTCC call */
+ Assert(cc != DFLTCC_CC_OP2_CORRUPT || param->oesc == 0, "BUG");
+
+ /* Update Block-Continuation Flag. It will be used to check whether to call
+ * GDHT the next time.
+ */
+ if (cc == DFLTCC_CC_OK) {
+ if (soft_bcc) {
+ send_eobs(strm, param);
+ param->bcf = 0;
+ dfltcc_state->block_threshold =
+ strm->total_in + dfltcc_state->block_size;
+ } else
+ param->bcf = 1;
+ if (flush == Z_FINISH) {
+ if (need_empty_block)
+ /* Make the current deflate() call also close the stream */
+ return 0;
+ else {
+ bi_windup(state);
+ *result = finish_done;
+ }
+ } else {
+ if (flush == Z_FULL_FLUSH)
+ param->hl = 0; /* Clear history */
+ *result = flush == Z_NO_FLUSH ? need_more : block_done;
+ }
+ } else {
+ param->bcf = 1;
+ *result = need_more;
+ }
+ if (strm->avail_in != 0 && strm->avail_out != 0)
+ goto again; /* deflate() must use all input or all output */
+ return 1;
+}
+
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: Zlib
+#ifndef DFLTCC_H
+#define DFLTCC_H
+
+#include "../zlib_deflate/defutil.h"
+
+/*
+ * Tuning parameters.
+ */
+#define DFLTCC_LEVEL_MASK 0x2 /* DFLTCC compression for level 1 only */
+#define DFLTCC_BLOCK_SIZE 1048576
+#define DFLTCC_FIRST_FHT_BLOCK_SIZE 4096
+#define DFLTCC_DHT_MIN_SAMPLE_SIZE 4096
+#define DFLTCC_RIBM 0
+
+/*
+ * Parameter Block for Query Available Functions.
+ */
+struct dfltcc_qaf_param {
+ char fns[16];
+ char reserved1[8];
+ char fmts[2];
+ char reserved2[6];
+};
+
+static_assert(sizeof(struct dfltcc_qaf_param) == 32);
+
+#define DFLTCC_FMT0 0
+
+/*
+ * Parameter Block for Generate Dynamic-Huffman Table, Compress and Expand.
+ */
+struct dfltcc_param_v0 {
+ uint16_t pbvn; /* Parameter-Block-Version Number */
+ uint8_t mvn; /* Model-Version Number */
+ uint8_t ribm; /* Reserved for IBM use */
+ unsigned reserved32 : 31;
+ unsigned cf : 1; /* Continuation Flag */
+ uint8_t reserved64[8];
+ unsigned nt : 1; /* New Task */
+ unsigned reserved129 : 1;
+ unsigned cvt : 1; /* Check Value Type */
+ unsigned reserved131 : 1;
+ unsigned htt : 1; /* Huffman-Table Type */
+ unsigned bcf : 1; /* Block-Continuation Flag */
+ unsigned bcc : 1; /* Block Closing Control */
+ unsigned bhf : 1; /* Block Header Final */
+ unsigned reserved136 : 1;
+ unsigned reserved137 : 1;
+ unsigned dhtgc : 1; /* DHT Generation Control */
+ unsigned reserved139 : 5;
+ unsigned reserved144 : 5;
+ unsigned sbb : 3; /* Sub-Byte Boundary */
+ uint8_t oesc; /* Operation-Ending-Supplemental Code */
+ unsigned reserved160 : 12;
+ unsigned ifs : 4; /* Incomplete-Function Status */
+ uint16_t ifl; /* Incomplete-Function Length */
+ uint8_t reserved192[8];
+ uint8_t reserved256[8];
+ uint8_t reserved320[4];
+ uint16_t hl; /* History Length */
+ unsigned reserved368 : 1;
+ uint16_t ho : 15; /* History Offset */
+ uint32_t cv; /* Check Value */
+ unsigned eobs : 15; /* End-of-block Symbol */
+ unsigned reserved431: 1;
+ uint8_t eobl : 4; /* End-of-block Length */
+ unsigned reserved436 : 12;
+ unsigned reserved448 : 4;
+ uint16_t cdhtl : 12; /* Compressed-Dynamic-Huffman Table
+ Length */
+ uint8_t reserved464[6];
+ uint8_t cdht[288];
+ uint8_t reserved[32];
+ uint8_t csb[1152];
+};
+
+static_assert(sizeof(struct dfltcc_param_v0) == 1536);
+
+#define CVT_CRC32 0
+#define CVT_ADLER32 1
+#define HTT_FIXED 0
+#define HTT_DYNAMIC 1
+
+/*
+ * Extension of inflate_state and deflate_state for DFLTCC.
+ */
+struct dfltcc_state {
+ struct dfltcc_param_v0 param; /* Parameter block */
+ struct dfltcc_qaf_param af; /* Available functions */
+ uLong level_mask; /* Levels on which to use DFLTCC */
+ uLong block_size; /* New block each X bytes */
+ uLong block_threshold; /* New block after total_in > X */
+ uLong dht_threshold; /* New block only if avail_in >= X */
+ char msg[64]; /* Buffer for strm->msg */
+};
+
+/* Resides right after inflate_state or deflate_state */
+#define GET_DFLTCC_STATE(state) ((struct dfltcc_state *)((state) + 1))
+
+/* External functions */
+int dfltcc_can_deflate(z_streamp strm);
+int dfltcc_deflate(z_streamp strm,
+ int flush,
+ block_state *result);
+void dfltcc_reset(z_streamp strm, uInt size);
+
+#define DEFLATE_RESET_HOOK(strm) \
+ dfltcc_reset((strm), sizeof(deflate_state))
+
+#define DEFLATE_HOOK dfltcc_deflate
+
+#define DEFLATE_NEED_CHECKSUM(strm) (!dfltcc_can_deflate((strm)))
+
+#endif /* DFLTCC_H */
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/lib/zlib_dfltcc/dfltcc_syms.c
+ *
+ * Exported symbols for the s390 zlib dfltcc support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/zlib.h>
+#include "dfltcc.h"
+
+EXPORT_SYMBOL(dfltcc_can_deflate);
+EXPORT_SYMBOL(dfltcc_deflate);
+EXPORT_SYMBOL(dfltcc_reset);
+MODULE_LICENSE("GPL");
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: Zlib
+#ifndef DFLTCC_UTIL_H
+#define DFLTCC_UTIL_H
+
+#include <linux/zutil.h>
+#include <asm/facility.h>
+
+/*
+ * C wrapper for the DEFLATE CONVERSION CALL instruction.
+ */
+typedef enum {
+ DFLTCC_CC_OK = 0,
+ DFLTCC_CC_OP1_TOO_SHORT = 1,
+ DFLTCC_CC_OP2_TOO_SHORT = 2,
+ DFLTCC_CC_OP2_CORRUPT = 2,
+ DFLTCC_CC_AGAIN = 3,
+} dfltcc_cc;
+
+#define DFLTCC_QAF 0
+#define DFLTCC_GDHT 1
+#define DFLTCC_CMPR 2
+#define DFLTCC_XPND 4
+#define HBT_CIRCULAR (1 << 7)
+#define HB_BITS 15
+#define HB_SIZE (1 << HB_BITS)
+#define DFLTCC_FACILITY 151
+
+static inline dfltcc_cc dfltcc(
+ int fn,
+ void *param,
+ Byte **op1,
+ size_t *len1,
+ const Byte **op2,
+ size_t *len2,
+ void *hist
+)
+{
+ Byte *t2 = op1 ? *op1 : NULL;
+ size_t t3 = len1 ? *len1 : 0;
+ const Byte *t4 = op2 ? *op2 : NULL;
+ size_t t5 = len2 ? *len2 : 0;
+ register int r0 __asm__("r0") = fn;
+ register void *r1 __asm__("r1") = param;
+ register Byte *r2 __asm__("r2") = t2;
+ register size_t r3 __asm__("r3") = t3;
+ register const Byte *r4 __asm__("r4") = t4;
+ register size_t r5 __asm__("r5") = t5;
+ int cc;
+
+ __asm__ volatile(
+ ".insn rrf,0xb9390000,%[r2],%[r4],%[hist],0\n"
+ "ipm %[cc]\n"
+ : [r2] "+r" (r2)
+ , [r3] "+r" (r3)
+ , [r4] "+r" (r4)
+ , [r5] "+r" (r5)
+ , [cc] "=r" (cc)
+ : [r0] "r" (r0)
+ , [r1] "r" (r1)
+ , [hist] "r" (hist)
+ : "cc", "memory");
+ t2 = r2; t3 = r3; t4 = r4; t5 = r5;
+
+ if (op1)
+ *op1 = t2;
+ if (len1)
+ *len1 = t3;
+ if (op2)
+ *op2 = t4;
+ if (len2)
+ *len2 = t5;
+ return (cc >> 28) & 3;
+}
+
+static inline int is_bit_set(
+ const char *bits,
+ int n
+)
+{
+ return bits[n / 8] & (1 << (7 - (n % 8)));
+}
+
+static inline void turn_bit_off(
+ char *bits,
+ int n
+)
+{
+ bits[n / 8] &= ~(1 << (7 - (n % 8)));
+}
+
+static inline int dfltcc_are_params_ok(
+ int level,
+ uInt window_bits,
+ int strategy,
+ uLong level_mask
+)
+{
+ return (level_mask & (1 << level)) != 0 &&
+ (window_bits == HB_BITS) &&
+ (strategy == Z_DEFAULT_STRATEGY);
+}
+
+static inline int is_dfltcc_enabled(void)
+{
+ return test_facility(DFLTCC_FACILITY);
+}
+
+char *oesc_msg(char *buf, int oesc);
+
+#endif /* DFLTCC_UTIL_H */
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# This is a modified version of zlib, which does all memory
+# allocation ahead of time.
+#
+# This is the code for s390 zlib hardware support.
+#
+
+obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc.o
+
+zlib_dfltcc-objs := dfltcc.o dfltcc_deflate.o dfltcc_syms.o