diff mbox series

[v5,2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

Message ID 20210511150734.3492-2-glittao@gmail.com (mailing list archive)
State New
Headers show
Series [v5,1/3] kunit: make test->lock irq safe | expand

Commit Message

Oliver Glitta May 11, 2021, 3:07 p.m. UTC
From: Oliver Glitta <glittao@gmail.com>

SLUB has resiliency_test() function which is hidden behind #ifdef
SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing
pointer to next free node, first byte, 50th byte and redzone
byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting
shared kmalloc caches.

The corruption of freepointer uses correct offset, the original
resiliency test got broken with freepointer changes.

Scratch changing random byte test, because it does not have
meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Tests next_pointer, first_word and clobber_50th_byte do not run
with KASAN option on. Because the test deliberately modifies non-allocated
objects.

Use kunit_resource to count errors in cache and silence bug reports.
Count error whenever slab_bug() or slab_fix() is called or when
the count of pages is wrong.

Signed-off-by: Oliver Glitta <glittao@gmail.com>
---
Changes since v4
Use two tests with KASAN dependency.
Remove setting current test during init and exit.

Changes since v3

Use kunit_resource to silence bug reports and count errors suggested by
Marco Elver.
Make the test depends on !KASAN thanks to report from the kernel test robot.

Changes since v2

Use bit operation & instead of logical && as reported by kernel test
robot and Dan Carpenter

Changes since v1

Conversion from kselftest to KUnit test suggested by Marco Elver.
Error silencing.
Error counting improvements.

 lib/Kconfig.debug |  12 ++++
 lib/Makefile      |   1 +
 lib/slub_kunit.c  | 155 ++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.h         |   1 +
 mm/slub.c         |  46 +++++++++++++-
 5 files changed, 212 insertions(+), 3 deletions(-)
 create mode 100644 lib/slub_kunit.c

--
2.31.1.272.g89b43f80a5

Comments

Marco Elver May 11, 2021, 3:16 p.m. UTC | #1
On Tue, 11 May 2021 at 17:07, <glittao@gmail.com> wrote:
> From: Oliver Glitta <glittao@gmail.com>
>
> SLUB has resiliency_test() function which is hidden behind #ifdef
> SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
> runs it. KUnit should be a proper replacement for it.
>
> Try changing byte in redzone after allocation and changing
> pointer to next free node, first byte, 50th byte and redzone
> byte. Check if validation finds errors.
>
> There are several differences from the original resiliency test:
> Tests create own caches with known state instead of corrupting
> shared kmalloc caches.
>
> The corruption of freepointer uses correct offset, the original
> resiliency test got broken with freepointer changes.
>
> Scratch changing random byte test, because it does not have
> meaning in this form where we need deterministic results.
>
> Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
> Tests next_pointer, first_word and clobber_50th_byte do not run
> with KASAN option on. Because the test deliberately modifies non-allocated
> objects.
>
> Use kunit_resource to count errors in cache and silence bug reports.
> Count error whenever slab_bug() or slab_fix() is called or when
> the count of pages is wrong.
>
> Signed-off-by: Oliver Glitta <glittao@gmail.com>

I think I had already reviewed v4, and the changes here are fine:

Reviewed-by: Marco Elver <elver@google.com>

Others who had reviewed/acked v4, probably need to re-ack/review.
Note, I think if you addressed the comments and didn't change much
else, you can typically carry the acks/reviews, unless the other
person changed their mind explicitly.

> ---
> Changes since v4
> Use two tests with KASAN dependency.
> Remove setting current test during init and exit.
>
> Changes since v3
>
> Use kunit_resource to silence bug reports and count errors suggested by
> Marco Elver.
> Make the test depends on !KASAN thanks to report from the kernel test robot.
>
> Changes since v2
>
> Use bit operation & instead of logical && as reported by kernel test
> robot and Dan Carpenter
>
> Changes since v1
>
> Conversion from kselftest to KUnit test suggested by Marco Elver.
> Error silencing.
> Error counting improvements.
>
>  lib/Kconfig.debug |  12 ++++
>  lib/Makefile      |   1 +
>  lib/slub_kunit.c  | 155 ++++++++++++++++++++++++++++++++++++++++++++++
>  mm/slab.h         |   1 +
>  mm/slub.c         |  46 +++++++++++++-
>  5 files changed, 212 insertions(+), 3 deletions(-)
>  create mode 100644 lib/slub_kunit.c
>
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 678c13967580..7723f58a9394 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -2429,6 +2429,18 @@ config BITS_TEST
>
>           If unsure, say N.
>
> +config SLUB_KUNIT_TEST
> +       tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
> +       depends on SLUB_DEBUG && KUNIT
> +       default KUNIT_ALL_TESTS
> +       help
> +         This builds SLUB allocator unit test.
> +         Tests SLUB cache debugging functionality.
> +         For more information on KUnit and unit tests in general please refer
> +         to the KUnit documentation in Documentation/dev-tools/kunit/.
> +
> +         If unsure, say N.
> +
>  config TEST_UDELAY
>         tristate "udelay test driver"
>         help
> diff --git a/lib/Makefile b/lib/Makefile
> index e11cfc18b6c0..386215dcb0a0 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -353,5 +353,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
>  obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
>  obj-$(CONFIG_BITS_TEST) += test_bits.o
>  obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
> +obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
>
>  obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
> diff --git a/lib/slub_kunit.c b/lib/slub_kunit.c
> new file mode 100644
> index 000000000000..f28965f64ef6
> --- /dev/null
> +++ b/lib/slub_kunit.c
> @@ -0,0 +1,155 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <kunit/test.h>
> +#include <linux/mm.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include "../mm/slab.h"
> +
> +static struct kunit_resource resource;
> +static int slab_errors;
> +
> +static void test_clobber_zone(struct kunit *test)
> +{
> +       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc", 64, 0,
> +                               SLAB_RED_ZONE, NULL);
> +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> +
> +       kasan_disable_current();
> +       p[64] = 0x12;
> +
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> +
> +       kasan_enable_current();
> +       kmem_cache_free(s, p);
> +       kmem_cache_destroy(s);
> +}
> +
> +#ifndef CONFIG_KASAN
> +static void test_next_pointer(struct kunit *test)
> +{
> +       struct kmem_cache *s = kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
> +                               SLAB_POISON, NULL);
> +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> +       unsigned long tmp;
> +       unsigned long *ptr_addr;
> +
> +       kmem_cache_free(s, p);
> +
> +       ptr_addr = (unsigned long *)(p + s->offset);
> +       tmp = *ptr_addr;
> +       p[s->offset] = 0x12;
> +
> +       /*
> +        * Expecting three errors.
> +        * One for the corrupted freechain and the other one for the wrong
> +        * count of objects in use. The third error is fixing broken cache.
> +        */
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 3, slab_errors);
> +
> +       /*
> +        * Try to repair corrupted freepointer.
> +        * Still expecting two errors. The first for the wrong count
> +        * of objects in use.
> +        * The second error is for fixing broken cache.
> +        */
> +       *ptr_addr = tmp;
> +       slab_errors = 0;
> +
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> +
> +       /*
> +        * Previous validation repaired the count of objects in use.
> +        * Now expecting no error.
> +        */
> +       slab_errors = 0;
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 0, slab_errors);
> +
> +       kmem_cache_destroy(s);
> +}
> +
> +static void test_first_word(struct kunit *test)
> +{
> +       struct kmem_cache *s = kmem_cache_create("TestSlub_1th_word_free", 64, 0,
> +                               SLAB_POISON, NULL);
> +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> +
> +       kmem_cache_free(s, p);
> +       *p = 0x78;
> +
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> +
> +       kmem_cache_destroy(s);
> +}
> +
> +static void test_clobber_50th_byte(struct kunit *test)
> +{
> +       struct kmem_cache *s = kmem_cache_create("TestSlub_50th_word_free", 64, 0,
> +                               SLAB_POISON, NULL);
> +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> +
> +       kmem_cache_free(s, p);
> +       p[50] = 0x9a;
> +
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> +
> +       kmem_cache_destroy(s);
> +}
> +#endif
> +
> +static void test_clobber_redzone_free(struct kunit *test)
> +{
> +       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free", 64, 0,
> +                               SLAB_RED_ZONE, NULL);
> +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> +
> +       kasan_disable_current();
> +       kmem_cache_free(s, p);
> +       p[64] = 0xab;
> +
> +       validate_slab_cache(s);
> +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> +
> +       kasan_enable_current();
> +       kmem_cache_destroy(s);
> +}
> +
> +static int test_init(struct kunit *test)
> +{
> +       slab_errors = 0;
> +
> +       kunit_add_named_resource(test, NULL, NULL, &resource,
> +                                       "slab_errors", &slab_errors);
> +       return 0;
> +}
> +
> +static void test_exit(struct kunit *test) {}

Does removing test_exit() and not setting it below work?

> +static struct kunit_case test_cases[] = {
> +       KUNIT_CASE(test_clobber_zone),
> +
> +#ifndef CONFIG_KASAN
> +       KUNIT_CASE(test_next_pointer),
> +       KUNIT_CASE(test_first_word),
> +       KUNIT_CASE(test_clobber_50th_byte),
> +#endif
> +
> +       KUNIT_CASE(test_clobber_redzone_free),
> +       {}

This is better, and tells us which tests exactly were the ones causing
problems with KASAN.


> +};
> +
> +static struct kunit_suite test_suite = {
> +       .name = "slub_test",
> +       .init = test_init,
> +       .exit = test_exit,
> +       .test_cases = test_cases,
> +};
> +kunit_test_suite(test_suite);
> +
> +MODULE_LICENSE("GPL");
> diff --git a/mm/slab.h b/mm/slab.h
> index 18c1927cd196..9b690fa44cae 100644
> --- a/mm/slab.h
> +++ b/mm/slab.h
> @@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
>  DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
>  #endif
>  extern void print_tracking(struct kmem_cache *s, void *object);
> +long validate_slab_cache(struct kmem_cache *s);
>  #else
>  static inline void print_tracking(struct kmem_cache *s, void *object)
>  {
> diff --git a/mm/slub.c b/mm/slub.c
> index feda53ae62ba..985fd6ef033c 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -35,6 +35,7 @@
>  #include <linux/prefetch.h>
>  #include <linux/memcontrol.h>
>  #include <linux/random.h>
> +#include <kunit/test.h>
>
>  #include <trace/events/kmem.h>
>
> @@ -447,6 +448,26 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
>  static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
>  static DEFINE_SPINLOCK(object_map_lock);
>
> +#if IS_ENABLED(CONFIG_KUNIT)
> +static bool slab_add_kunit_errors(void)
> +{
> +       struct kunit_resource *resource;
> +
> +       if (likely(!current->kunit_test))
> +               return false;
> +
> +       resource = kunit_find_named_resource(current->kunit_test, "slab_errors");
> +       if (!resource)
> +               return false;
> +
> +       (*(int *)resource->data)++;
> +       kunit_put_resource(resource);
> +       return true;
> +}
> +#else
> +static inline bool slab_add_kunit_errors(void) { return false; }
> +#endif
> +
>  /*
>   * Determine a map of object in use on a page.
>   *
> @@ -677,6 +698,9 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
>         struct va_format vaf;
>         va_list args;
>
> +       if (slab_add_kunit_errors())
> +               return;
> +
>         va_start(args, fmt);
>         vaf.fmt = fmt;
>         vaf.va = &args;
> @@ -740,6 +764,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
>  void object_err(struct kmem_cache *s, struct page *page,
>                         u8 *object, char *reason)
>  {
> +       if (slab_add_kunit_errors())
> +               return;
> +
>         slab_bug(s, "%s", reason);
>         print_trailer(s, page, object);
>  }
> @@ -750,6 +777,9 @@ static __printf(3, 4) void slab_err(struct kmem_cache *s, struct page *page,
>         va_list args;
>         char buf[100];
>
> +       if (slab_add_kunit_errors())
> +               return;
> +
>         va_start(args, fmt);
>         vsnprintf(buf, sizeof(buf), fmt, args);
>         va_end(args);
> @@ -799,12 +829,16 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
>         while (end > fault && end[-1] == value)
>                 end--;
>
> +       if (slab_add_kunit_errors())
> +               goto skip_bug_print;
> +
>         slab_bug(s, "%s overwritten", what);
>         pr_err("0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",
>                                         fault, end - 1, fault - addr,
>                                         fault[0], value);
>         print_trailer(s, page, object);
>
> +skip_bug_print:
>         restore_bytes(s, what, value, fault, end);
>         return 0;
>  }
> @@ -4662,9 +4696,11 @@ static int validate_slab_node(struct kmem_cache *s,
>                 validate_slab(s, page);
>                 count++;
>         }
> -       if (count != n->nr_partial)
> +       if (count != n->nr_partial) {
>                 pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",
>                        s->name, count, n->nr_partial);
> +               slab_add_kunit_errors();
> +       }
>
>         if (!(s->flags & SLAB_STORE_USER))
>                 goto out;
> @@ -4673,16 +4709,18 @@ static int validate_slab_node(struct kmem_cache *s,
>                 validate_slab(s, page);
>                 count++;
>         }
> -       if (count != atomic_long_read(&n->nr_slabs))
> +       if (count != atomic_long_read(&n->nr_slabs)) {
>                 pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
>                        s->name, count, atomic_long_read(&n->nr_slabs));
> +               slab_add_kunit_errors();
> +       }
>
>  out:
>         spin_unlock_irqrestore(&n->list_lock, flags);
>         return count;
>  }
>
> -static long validate_slab_cache(struct kmem_cache *s)
> +long validate_slab_cache(struct kmem_cache *s)
>  {
>         int node;
>         unsigned long count = 0;
> @@ -4694,6 +4732,8 @@ static long validate_slab_cache(struct kmem_cache *s)
>
>         return count;
>  }
> +EXPORT_SYMBOL(validate_slab_cache);
> +
>  /*
>   * Generate lists of code addresses where slabcache objects are allocated
>   * and freed.
> --
> 2.31.1.272.g89b43f80a5
>
Vlastimil Babka May 12, 2021, 10:30 a.m. UTC | #2
On 5/11/21 5:16 PM, Marco Elver wrote:
> On Tue, 11 May 2021 at 17:07, <glittao@gmail.com> wrote:
>> From: Oliver Glitta <glittao@gmail.com>
>>
>> SLUB has resiliency_test() function which is hidden behind #ifdef
>> SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
>> runs it. KUnit should be a proper replacement for it.
>>
>> Try changing byte in redzone after allocation and changing
>> pointer to next free node, first byte, 50th byte and redzone
>> byte. Check if validation finds errors.
>>
>> There are several differences from the original resiliency test:
>> Tests create own caches with known state instead of corrupting
>> shared kmalloc caches.
>>
>> The corruption of freepointer uses correct offset, the original
>> resiliency test got broken with freepointer changes.
>>
>> Scratch changing random byte test, because it does not have
>> meaning in this form where we need deterministic results.
>>
>> Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
>> Tests next_pointer, first_word and clobber_50th_byte do not run
>> with KASAN option on. Because the test deliberately modifies non-allocated
>> objects.
>>
>> Use kunit_resource to count errors in cache and silence bug reports.
>> Count error whenever slab_bug() or slab_fix() is called or when
>> the count of pages is wrong.
>>
>> Signed-off-by: Oliver Glitta <glittao@gmail.com>

Reviewed-by: Vlastimil Babka <vbabka@suse.cz>

> I think I had already reviewed v4, and the changes here are fine:
> 
> Reviewed-by: Marco Elver <elver@google.com>
> 
> Others who had reviewed/acked v4, probably need to re-ack/review.
> Note, I think if you addressed the comments and didn't change much
> else, you can typically carry the acks/reviews, unless the other
> person changed their mind explicitly.

FTR, besides me and Marco, v4 had also:

Acked-by: Daniel Latypov <dlatypov@google.com>
Oliver Glitta May 12, 2021, 12:24 p.m. UTC | #3
ut 11. 5. 2021 o 17:16 Marco Elver <elver@google.com> napísal(a):

>
> On Tue, 11 May 2021 at 17:07, <glittao@gmail.com> wrote:
> > From: Oliver Glitta <glittao@gmail.com>
> >
> > SLUB has resiliency_test() function which is hidden behind #ifdef
> > SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
> > runs it. KUnit should be a proper replacement for it.
> >
> > Try changing byte in redzone after allocation and changing
> > pointer to next free node, first byte, 50th byte and redzone
> > byte. Check if validation finds errors.
> >
> > There are several differences from the original resiliency test:
> > Tests create own caches with known state instead of corrupting
> > shared kmalloc caches.
> >
> > The corruption of freepointer uses correct offset, the original
> > resiliency test got broken with freepointer changes.
> >
> > Scratch changing random byte test, because it does not have
> > meaning in this form where we need deterministic results.
> >
> > Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
> > Tests next_pointer, first_word and clobber_50th_byte do not run
> > with KASAN option on. Because the test deliberately modifies
non-allocated
> > objects.
> >
> > Use kunit_resource to count errors in cache and silence bug reports.
> > Count error whenever slab_bug() or slab_fix() is called or when
> > the count of pages is wrong.
> >
> > Signed-off-by: Oliver Glitta <glittao@gmail.com>
>
> I think I had already reviewed v4, and the changes here are fine:
>
> Reviewed-by: Marco Elver <elver@google.com>

Thank you again.

I’m sorry about, I forgot to add this tags.

> Others who had reviewed/acked v4, probably need to re-ack/review.
> Note, I think if you addressed the comments and didn't change much
> else, you can typically carry the acks/reviews, unless the other
> person changed their mind explicitly.
>
> > ---
> > Changes since v4
> > Use two tests with KASAN dependency.
> > Remove setting current test during init and exit.
> >
> > Changes since v3
> >
> > Use kunit_resource to silence bug reports and count errors suggested by
> > Marco Elver.
> > Make the test depends on !KASAN thanks to report from the kernel test
robot.
> >
> > Changes since v2
> >
> > Use bit operation & instead of logical && as reported by kernel test
> > robot and Dan Carpenter
> >
> > Changes since v1
> >
> > Conversion from kselftest to KUnit test suggested by Marco Elver.
> > Error silencing.
> > Error counting improvements.
> >
> >  lib/Kconfig.debug |  12 ++++
> >  lib/Makefile      |   1 +
> >  lib/slub_kunit.c  | 155 ++++++++++++++++++++++++++++++++++++++++++++++
> >  mm/slab.h         |   1 +
> >  mm/slub.c         |  46 +++++++++++++-
> >  5 files changed, 212 insertions(+), 3 deletions(-)
> >  create mode 100644 lib/slub_kunit.c
> >
> > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > index 678c13967580..7723f58a9394 100644
> > --- a/lib/Kconfig.debug
> > +++ b/lib/Kconfig.debug
> > @@ -2429,6 +2429,18 @@ config BITS_TEST
> >
> >           If unsure, say N.
> >
> > +config SLUB_KUNIT_TEST
> > +       tristate "KUnit test for SLUB cache error detection" if
!KUNIT_ALL_TESTS
> > +       depends on SLUB_DEBUG && KUNIT
> > +       default KUNIT_ALL_TESTS
> > +       help
> > +         This builds SLUB allocator unit test.
> > +         Tests SLUB cache debugging functionality.
> > +         For more information on KUnit and unit tests in general
please refer
> > +         to the KUnit documentation in Documentation/dev-tools/kunit/.
> > +
> > +         If unsure, say N.
> > +
> >  config TEST_UDELAY
> >         tristate "udelay test driver"
> >         help
> > diff --git a/lib/Makefile b/lib/Makefile
> > index e11cfc18b6c0..386215dcb0a0 100644
> > --- a/lib/Makefile
> > +++ b/lib/Makefile
> > @@ -353,5 +353,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
> >  obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
> >  obj-$(CONFIG_BITS_TEST) += test_bits.o
> >  obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
> > +obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
> >
> >  obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
> > diff --git a/lib/slub_kunit.c b/lib/slub_kunit.c
> > new file mode 100644
> > index 000000000000..f28965f64ef6
> > --- /dev/null
> > +++ b/lib/slub_kunit.c
> > @@ -0,0 +1,155 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include <kunit/test.h>
> > +#include <linux/mm.h>
> > +#include <linux/slab.h>
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include "../mm/slab.h"
> > +
> > +static struct kunit_resource resource;
> > +static int slab_errors;
> > +
> > +static void test_clobber_zone(struct kunit *test)
> > +{
> > +       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc",
64, 0,
> > +                               SLAB_RED_ZONE, NULL);
> > +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> > +
> > +       kasan_disable_current();
> > +       p[64] = 0x12;
> > +
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> > +
> > +       kasan_enable_current();
> > +       kmem_cache_free(s, p);
> > +       kmem_cache_destroy(s);
> > +}
> > +
> > +#ifndef CONFIG_KASAN
> > +static void test_next_pointer(struct kunit *test)
> > +{
> > +       struct kmem_cache *s =
kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
> > +                               SLAB_POISON, NULL);
> > +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> > +       unsigned long tmp;
> > +       unsigned long *ptr_addr;
> > +
> > +       kmem_cache_free(s, p);
> > +
> > +       ptr_addr = (unsigned long *)(p + s->offset);
> > +       tmp = *ptr_addr;
> > +       p[s->offset] = 0x12;
> > +
> > +       /*
> > +        * Expecting three errors.
> > +        * One for the corrupted freechain and the other one for the
wrong
> > +        * count of objects in use. The third error is fixing broken
cache.
> > +        */
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 3, slab_errors);
> > +
> > +       /*
> > +        * Try to repair corrupted freepointer.
> > +        * Still expecting two errors. The first for the wrong count
> > +        * of objects in use.
> > +        * The second error is for fixing broken cache.
> > +        */
> > +       *ptr_addr = tmp;
> > +       slab_errors = 0;
> > +
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> > +
> > +       /*
> > +        * Previous validation repaired the count of objects in use.
> > +        * Now expecting no error.
> > +        */
> > +       slab_errors = 0;
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 0, slab_errors);
> > +
> > +       kmem_cache_destroy(s);
> > +}
> > +
> > +static void test_first_word(struct kunit *test)
> > +{
> > +       struct kmem_cache *s =
kmem_cache_create("TestSlub_1th_word_free", 64, 0,
> > +                               SLAB_POISON, NULL);
> > +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> > +
> > +       kmem_cache_free(s, p);
> > +       *p = 0x78;
> > +
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> > +
> > +       kmem_cache_destroy(s);
> > +}
> > +
> > +static void test_clobber_50th_byte(struct kunit *test)
> > +{
> > +       struct kmem_cache *s =
kmem_cache_create("TestSlub_50th_word_free", 64, 0,
> > +                               SLAB_POISON, NULL);
> > +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> > +
> > +       kmem_cache_free(s, p);
> > +       p[50] = 0x9a;
> > +
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> > +
> > +       kmem_cache_destroy(s);
> > +}
> > +#endif
> > +
> > +static void test_clobber_redzone_free(struct kunit *test)
> > +{
> > +       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free",
64, 0,
> > +                               SLAB_RED_ZONE, NULL);
> > +       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
> > +
> > +       kasan_disable_current();
> > +       kmem_cache_free(s, p);
> > +       p[64] = 0xab;
> > +
> > +       validate_slab_cache(s);
> > +       KUNIT_EXPECT_EQ(test, 2, slab_errors);
> > +
> > +       kasan_enable_current();
> > +       kmem_cache_destroy(s);
> > +}
> > +
> > +static int test_init(struct kunit *test)
> > +{
> > +       slab_errors = 0;
> > +
> > +       kunit_add_named_resource(test, NULL, NULL, &resource,
> > +                                       "slab_errors", &slab_errors);
> > +       return 0;
> > +}
> > +
> > +static void test_exit(struct kunit *test) {}
>
> Does removing test_exit() and not setting it below work?

Yes this works. Thank you for that. I try to remove function but I didn't
think about not setting it, so it didn't work. I will fix it.

> > +static struct kunit_case test_cases[] = {
> > +       KUNIT_CASE(test_clobber_zone),
> > +
> > +#ifndef CONFIG_KASAN
> > +       KUNIT_CASE(test_next_pointer),
> > +       KUNIT_CASE(test_first_word),
> > +       KUNIT_CASE(test_clobber_50th_byte),
> > +#endif
> > +
> > +       KUNIT_CASE(test_clobber_redzone_free),
> > +       {}
>
> This is better, and tells us which tests exactly were the ones causing
> problems with KASAN.
>
>
> > +};
> > +
> > +static struct kunit_suite test_suite = {
> > +       .name = "slub_test",
> > +       .init = test_init,
> > +       .exit = test_exit,
> > +       .test_cases = test_cases,
> > +};
> > +kunit_test_suite(test_suite);
> > +
> > +MODULE_LICENSE("GPL");
> > diff --git a/mm/slab.h b/mm/slab.h
> > index 18c1927cd196..9b690fa44cae 100644
> > --- a/mm/slab.h
> > +++ b/mm/slab.h
> > @@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
> >  DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
> >  #endif
> >  extern void print_tracking(struct kmem_cache *s, void *object);
> > +long validate_slab_cache(struct kmem_cache *s);
> >  #else
> >  static inline void print_tracking(struct kmem_cache *s, void *object)
> >  {
> > diff --git a/mm/slub.c b/mm/slub.c
> > index feda53ae62ba..985fd6ef033c 100644
> > --- a/mm/slub.c
> > +++ b/mm/slub.c
> > @@ -35,6 +35,7 @@
> >  #include <linux/prefetch.h>
> >  #include <linux/memcontrol.h>
> >  #include <linux/random.h>
> > +#include <kunit/test.h>
> >
> >  #include <trace/events/kmem.h>
> >
> > @@ -447,6 +448,26 @@ static inline bool cmpxchg_double_slab(struct
kmem_cache *s, struct page *page,
> >  static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
> >  static DEFINE_SPINLOCK(object_map_lock);
> >
> > +#if IS_ENABLED(CONFIG_KUNIT)
> > +static bool slab_add_kunit_errors(void)
> > +{
> > +       struct kunit_resource *resource;
> > +
> > +       if (likely(!current->kunit_test))
> > +               return false;
> > +
> > +       resource = kunit_find_named_resource(current->kunit_test,
"slab_errors");
> > +       if (!resource)
> > +               return false;
> > +
> > +       (*(int *)resource->data)++;
> > +       kunit_put_resource(resource);
> > +       return true;
> > +}
> > +#else
> > +static inline bool slab_add_kunit_errors(void) { return false; }
> > +#endif
> > +
> >  /*
> >   * Determine a map of object in use on a page.
> >   *
> > @@ -677,6 +698,9 @@ static void slab_fix(struct kmem_cache *s, char
*fmt, ...)
> >         struct va_format vaf;
> >         va_list args;
> >
> > +       if (slab_add_kunit_errors())
> > +               return;
> > +
> >         va_start(args, fmt);
> >         vaf.fmt = fmt;
> >         vaf.va = &args;
> > @@ -740,6 +764,9 @@ static void print_trailer(struct kmem_cache *s,
struct page *page, u8 *p)
> >  void object_err(struct kmem_cache *s, struct page *page,
> >                         u8 *object, char *reason)
> >  {
> > +       if (slab_add_kunit_errors())
> > +               return;
> > +
> >         slab_bug(s, "%s", reason);
> >         print_trailer(s, page, object);
> >  }
> > @@ -750,6 +777,9 @@ static __printf(3, 4) void slab_err(struct
kmem_cache *s, struct page *page,
> >         va_list args;
> >         char buf[100];
> >
> > +       if (slab_add_kunit_errors())
> > +               return;
> > +
> >         va_start(args, fmt);
> >         vsnprintf(buf, sizeof(buf), fmt, args);
> >         va_end(args);
> > @@ -799,12 +829,16 @@ static int check_bytes_and_report(struct
kmem_cache *s, struct page *page,
> >         while (end > fault && end[-1] == value)
> >                 end--;
> >
> > +       if (slab_add_kunit_errors())
> > +               goto skip_bug_print;
> > +
> >         slab_bug(s, "%s overwritten", what);
> >         pr_err("0x%p-0x%p @offset=%tu. First byte 0x%x instead of
0x%x\n",
> >                                         fault, end - 1, fault - addr,
> >                                         fault[0], value);
> >         print_trailer(s, page, object);
> >
> > +skip_bug_print:
> >         restore_bytes(s, what, value, fault, end);
> >         return 0;
> >  }
> > @@ -4662,9 +4696,11 @@ static int validate_slab_node(struct kmem_cache
*s,
> >                 validate_slab(s, page);
> >                 count++;
> >         }
> > -       if (count != n->nr_partial)
> > +       if (count != n->nr_partial) {
> >                 pr_err("SLUB %s: %ld partial slabs counted but
counter=%ld\n",
> >                        s->name, count, n->nr_partial);
> > +               slab_add_kunit_errors();
> > +       }
> >
> >         if (!(s->flags & SLAB_STORE_USER))
> >                 goto out;
> > @@ -4673,16 +4709,18 @@ static int validate_slab_node(struct kmem_cache
*s,
> >                 validate_slab(s, page);
> >                 count++;
> >         }
> > -       if (count != atomic_long_read(&n->nr_slabs))
> > +       if (count != atomic_long_read(&n->nr_slabs)) {
> >                 pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
> >                        s->name, count, atomic_long_read(&n->nr_slabs));
> > +               slab_add_kunit_errors();
> > +       }
> >
> >  out:
> >         spin_unlock_irqrestore(&n->list_lock, flags);
> >         return count;
> >  }
> >
> > -static long validate_slab_cache(struct kmem_cache *s)
> > +long validate_slab_cache(struct kmem_cache *s)
> >  {
> >         int node;
> >         unsigned long count = 0;
> > @@ -4694,6 +4732,8 @@ static long validate_slab_cache(struct kmem_cache
*s)
> >
> >         return count;
> >  }
> > +EXPORT_SYMBOL(validate_slab_cache);
> > +
> >  /*
> >   * Generate lists of code addresses where slabcache objects are
allocated
> >   * and freed.
> > --
> > 2.31.1.272.g89b43f80a5
> >
Andrew Morton May 13, 2021, 4:44 a.m. UTC | #4
On Tue, 11 May 2021 17:07:33 +0200 glittao@gmail.com wrote:

> From: Oliver Glitta <glittao@gmail.com>
> 
> SLUB has resiliency_test() function which is hidden behind #ifdef
> SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
> runs it. KUnit should be a proper replacement for it.
> 
> Try changing byte in redzone after allocation and changing
> pointer to next free node, first byte, 50th byte and redzone
> byte. Check if validation finds errors.
> 
> There are several differences from the original resiliency test:
> Tests create own caches with known state instead of corrupting
> shared kmalloc caches.
> 
> The corruption of freepointer uses correct offset, the original
> resiliency test got broken with freepointer changes.
> 
> Scratch changing random byte test, because it does not have
> meaning in this form where we need deterministic results.
> 
> Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
> Tests next_pointer, first_word and clobber_50th_byte do not run
> with KASAN option on. Because the test deliberately modifies non-allocated
> objects.
> 
> Use kunit_resource to count errors in cache and silence bug reports.
> Count error whenever slab_bug() or slab_fix() is called or when
> the count of pages is wrong.
> 
> ...
>
>  lib/slub_kunit.c  | 155 ++++++++++++++++++++++++++++++++++++++++++++++
>  mm/slab.h         |   1 +
>  mm/slub.c         |  46 +++++++++++++-
>  5 files changed, 212 insertions(+), 3 deletions(-)
>  create mode 100644 lib/slub_kunit.c
> 
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 678c13967580..7723f58a9394 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -2429,6 +2429,18 @@ config BITS_TEST
> 
>  	  If unsure, say N.
> 
> +config SLUB_KUNIT_TEST
> +	tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS

This means it can be compiled as a kernel module.  Did you runtime test the
code as a module?

ERROR: modpost: "kasan_enable_current" [lib/slub_kunit.ko] undefined!
ERROR: modpost: "kasan_disable_current" [lib/slub_kunit.ko] undefined!

--- a/mm/kasan/common.c~a
+++ a/mm/kasan/common.c
@@ -51,11 +51,14 @@ void kasan_enable_current(void)
 {
 	current->kasan_depth++;
 }
+EXPORT_SYMBOL(kasan_enable_current);
 
 void kasan_disable_current(void)
 {
 	current->kasan_depth--;
 }
+EXPORT_SYMBOL(kasan_disable_current);
+
 #endif /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */
 
 void __kasan_unpoison_range(const void *address, size_t size)
Marco Elver May 13, 2021, 8:54 a.m. UTC | #5
On Thu, 13 May 2021 at 06:44, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Tue, 11 May 2021 17:07:33 +0200 glittao@gmail.com wrote:
> > From: Oliver Glitta <glittao@gmail.com>
> >
> > SLUB has resiliency_test() function which is hidden behind #ifdef
> > SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
> > runs it. KUnit should be a proper replacement for it.
> >
> > Try changing byte in redzone after allocation and changing
> > pointer to next free node, first byte, 50th byte and redzone
> > byte. Check if validation finds errors.
> >
> > There are several differences from the original resiliency test:
> > Tests create own caches with known state instead of corrupting
> > shared kmalloc caches.
> >
> > The corruption of freepointer uses correct offset, the original
> > resiliency test got broken with freepointer changes.
> >
> > Scratch changing random byte test, because it does not have
> > meaning in this form where we need deterministic results.
> >
> > Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
> > Tests next_pointer, first_word and clobber_50th_byte do not run
> > with KASAN option on. Because the test deliberately modifies non-allocated
> > objects.
> >
> > Use kunit_resource to count errors in cache and silence bug reports.
> > Count error whenever slab_bug() or slab_fix() is called or when
> > the count of pages is wrong.
> >
> > ...
> >
> >  lib/slub_kunit.c  | 155 ++++++++++++++++++++++++++++++++++++++++++++++
> >  mm/slab.h         |   1 +
> >  mm/slub.c         |  46 +++++++++++++-
> >  5 files changed, 212 insertions(+), 3 deletions(-)
> >  create mode 100644 lib/slub_kunit.c
> >
> > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > index 678c13967580..7723f58a9394 100644
> > --- a/lib/Kconfig.debug
> > +++ b/lib/Kconfig.debug
> > @@ -2429,6 +2429,18 @@ config BITS_TEST
> >
> >         If unsure, say N.
> >
> > +config SLUB_KUNIT_TEST
> > +     tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
>
> This means it can be compiled as a kernel module.  Did you runtime test the
> code as a module?
>
> ERROR: modpost: "kasan_enable_current" [lib/slub_kunit.ko] undefined!
> ERROR: modpost: "kasan_disable_current" [lib/slub_kunit.ko] undefined!
>
> --- a/mm/kasan/common.c~a
> +++ a/mm/kasan/common.c
> @@ -51,11 +51,14 @@ void kasan_enable_current(void)
>  {
>         current->kasan_depth++;
>  }
> +EXPORT_SYMBOL(kasan_enable_current);
>
>  void kasan_disable_current(void)
>  {
>         current->kasan_depth--;
>  }
> +EXPORT_SYMBOL(kasan_disable_current);
> +
>  #endif /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */
>
>  void __kasan_unpoison_range(const void *address, size_t size)
> _

Acked-by: Marco Elver <elver@google.com>
Oliver Glitta May 13, 2021, 9:32 a.m. UTC | #6
št 13. 5. 2021 o 6:44 Andrew Morton <akpm@linux-foundation.org> napísal(a):
>
> On Tue, 11 May 2021 17:07:33 +0200 glittao@gmail.com wrote:
>
> > From: Oliver Glitta <glittao@gmail.com>
> >
> > SLUB has resiliency_test() function which is hidden behind #ifdef
> > SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody
> > runs it. KUnit should be a proper replacement for it.
> >
> > Try changing byte in redzone after allocation and changing
> > pointer to next free node, first byte, 50th byte and redzone
> > byte. Check if validation finds errors.
> >
> > There are several differences from the original resiliency test:
> > Tests create own caches with known state instead of corrupting
> > shared kmalloc caches.
> >
> > The corruption of freepointer uses correct offset, the original
> > resiliency test got broken with freepointer changes.
> >
> > Scratch changing random byte test, because it does not have
> > meaning in this form where we need deterministic results.
> >
> > Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
> > Tests next_pointer, first_word and clobber_50th_byte do not run
> > with KASAN option on. Because the test deliberately modifies non-allocated
> > objects.
> >
> > Use kunit_resource to count errors in cache and silence bug reports.
> > Count error whenever slab_bug() or slab_fix() is called or when
> > the count of pages is wrong.
> >
> > ...
> >
> >  lib/slub_kunit.c  | 155 ++++++++++++++++++++++++++++++++++++++++++++++
> >  mm/slab.h         |   1 +
> >  mm/slub.c         |  46 +++++++++++++-
> >  5 files changed, 212 insertions(+), 3 deletions(-)
> >  create mode 100644 lib/slub_kunit.c
> >
> > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > index 678c13967580..7723f58a9394 100644
> > --- a/lib/Kconfig.debug
> > +++ b/lib/Kconfig.debug
> > @@ -2429,6 +2429,18 @@ config BITS_TEST
> >
> >         If unsure, say N.
> >
> > +config SLUB_KUNIT_TEST
> > +     tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
>
> This means it can be compiled as a kernel module.  Did you runtime test the
> code as a module?
>
We tested this as a module in the previous version, but I forgot to
try it with this new one. So we didn't find this error.
Thank you for your fix.

> ERROR: modpost: "kasan_enable_current" [lib/slub_kunit.ko] undefined!
> ERROR: modpost: "kasan_disable_current" [lib/slub_kunit.ko] undefined!
>
> --- a/mm/kasan/common.c~a
> +++ a/mm/kasan/common.c
> @@ -51,11 +51,14 @@ void kasan_enable_current(void)
>  {
>         current->kasan_depth++;
>  }
> +EXPORT_SYMBOL(kasan_enable_current);
>
>  void kasan_disable_current(void)
>  {
>         current->kasan_depth--;
>  }
> +EXPORT_SYMBOL(kasan_disable_current);
> +
>  #endif /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */
>
>  void __kasan_unpoison_range(const void *address, size_t size)
> _
>
diff mbox series

Patch

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 678c13967580..7723f58a9394 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -2429,6 +2429,18 @@  config BITS_TEST

 	  If unsure, say N.

+config SLUB_KUNIT_TEST
+	tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+	depends on SLUB_DEBUG && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds SLUB allocator unit test.
+	  Tests SLUB cache debugging functionality.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
 config TEST_UDELAY
 	tristate "udelay test driver"
 	help
diff --git a/lib/Makefile b/lib/Makefile
index e11cfc18b6c0..386215dcb0a0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -353,5 +353,6 @@  obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
 obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
 obj-$(CONFIG_BITS_TEST) += test_bits.o
 obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
+obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o

 obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
diff --git a/lib/slub_kunit.c b/lib/slub_kunit.c
new file mode 100644
index 000000000000..f28965f64ef6
--- /dev/null
+++ b/lib/slub_kunit.c
@@ -0,0 +1,155 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include <kunit/test.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../mm/slab.h"
+
+static struct kunit_resource resource;
+static int slab_errors;
+
+static void test_clobber_zone(struct kunit *test)
+{
+	struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc", 64, 0,
+				SLAB_RED_ZONE, NULL);
+	u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+	kasan_disable_current();
+	p[64] = 0x12;
+
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+	kasan_enable_current();
+	kmem_cache_free(s, p);
+	kmem_cache_destroy(s);
+}
+
+#ifndef CONFIG_KASAN
+static void test_next_pointer(struct kunit *test)
+{
+	struct kmem_cache *s = kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
+				SLAB_POISON, NULL);
+	u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+	unsigned long tmp;
+	unsigned long *ptr_addr;
+
+	kmem_cache_free(s, p);
+
+	ptr_addr = (unsigned long *)(p + s->offset);
+	tmp = *ptr_addr;
+	p[s->offset] = 0x12;
+
+	/*
+	 * Expecting three errors.
+	 * One for the corrupted freechain and the other one for the wrong
+	 * count of objects in use. The third error is fixing broken cache.
+	 */
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 3, slab_errors);
+
+	/*
+	 * Try to repair corrupted freepointer.
+	 * Still expecting two errors. The first for the wrong count
+	 * of objects in use.
+	 * The second error is for fixing broken cache.
+	 */
+	*ptr_addr = tmp;
+	slab_errors = 0;
+
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+	/*
+	 * Previous validation repaired the count of objects in use.
+	 * Now expecting no error.
+	 */
+	slab_errors = 0;
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 0, slab_errors);
+
+	kmem_cache_destroy(s);
+}
+
+static void test_first_word(struct kunit *test)
+{
+	struct kmem_cache *s = kmem_cache_create("TestSlub_1th_word_free", 64, 0,
+				SLAB_POISON, NULL);
+	u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+	kmem_cache_free(s, p);
+	*p = 0x78;
+
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+	kmem_cache_destroy(s);
+}
+
+static void test_clobber_50th_byte(struct kunit *test)
+{
+	struct kmem_cache *s = kmem_cache_create("TestSlub_50th_word_free", 64, 0,
+				SLAB_POISON, NULL);
+	u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+	kmem_cache_free(s, p);
+	p[50] = 0x9a;
+
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+	kmem_cache_destroy(s);
+}
+#endif
+
+static void test_clobber_redzone_free(struct kunit *test)
+{
+	struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free", 64, 0,
+				SLAB_RED_ZONE, NULL);
+	u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+	kasan_disable_current();
+	kmem_cache_free(s, p);
+	p[64] = 0xab;
+
+	validate_slab_cache(s);
+	KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+	kasan_enable_current();
+	kmem_cache_destroy(s);
+}
+
+static int test_init(struct kunit *test)
+{
+	slab_errors = 0;
+
+	kunit_add_named_resource(test, NULL, NULL, &resource,
+					"slab_errors", &slab_errors);
+	return 0;
+}
+
+static void test_exit(struct kunit *test) {}
+
+static struct kunit_case test_cases[] = {
+	KUNIT_CASE(test_clobber_zone),
+
+#ifndef CONFIG_KASAN
+	KUNIT_CASE(test_next_pointer),
+	KUNIT_CASE(test_first_word),
+	KUNIT_CASE(test_clobber_50th_byte),
+#endif
+
+	KUNIT_CASE(test_clobber_redzone_free),
+	{}
+};
+
+static struct kunit_suite test_suite = {
+	.name = "slub_test",
+	.init = test_init,
+	.exit = test_exit,
+	.test_cases = test_cases,
+};
+kunit_test_suite(test_suite);
+
+MODULE_LICENSE("GPL");
diff --git a/mm/slab.h b/mm/slab.h
index 18c1927cd196..9b690fa44cae 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -215,6 +215,7 @@  DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+long validate_slab_cache(struct kmem_cache *s);
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
diff --git a/mm/slub.c b/mm/slub.c
index feda53ae62ba..985fd6ef033c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -35,6 +35,7 @@ 
 #include <linux/prefetch.h>
 #include <linux/memcontrol.h>
 #include <linux/random.h>
+#include <kunit/test.h>

 #include <trace/events/kmem.h>

@@ -447,6 +448,26 @@  static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
 static DEFINE_SPINLOCK(object_map_lock);

+#if IS_ENABLED(CONFIG_KUNIT)
+static bool slab_add_kunit_errors(void)
+{
+	struct kunit_resource *resource;
+
+	if (likely(!current->kunit_test))
+		return false;
+
+	resource = kunit_find_named_resource(current->kunit_test, "slab_errors");
+	if (!resource)
+		return false;
+
+	(*(int *)resource->data)++;
+	kunit_put_resource(resource);
+	return true;
+}
+#else
+static inline bool slab_add_kunit_errors(void) { return false; }
+#endif
+
 /*
  * Determine a map of object in use on a page.
  *
@@ -677,6 +698,9 @@  static void slab_fix(struct kmem_cache *s, char *fmt, ...)
 	struct va_format vaf;
 	va_list args;

+	if (slab_add_kunit_errors())
+		return;
+
 	va_start(args, fmt);
 	vaf.fmt = fmt;
 	vaf.va = &args;
@@ -740,6 +764,9 @@  static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 void object_err(struct kmem_cache *s, struct page *page,
 			u8 *object, char *reason)
 {
+	if (slab_add_kunit_errors())
+		return;
+
 	slab_bug(s, "%s", reason);
 	print_trailer(s, page, object);
 }
@@ -750,6 +777,9 @@  static __printf(3, 4) void slab_err(struct kmem_cache *s, struct page *page,
 	va_list args;
 	char buf[100];

+	if (slab_add_kunit_errors())
+		return;
+
 	va_start(args, fmt);
 	vsnprintf(buf, sizeof(buf), fmt, args);
 	va_end(args);
@@ -799,12 +829,16 @@  static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
 	while (end > fault && end[-1] == value)
 		end--;

+	if (slab_add_kunit_errors())
+		goto skip_bug_print;
+
 	slab_bug(s, "%s overwritten", what);
 	pr_err("0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",
 					fault, end - 1, fault - addr,
 					fault[0], value);
 	print_trailer(s, page, object);

+skip_bug_print:
 	restore_bytes(s, what, value, fault, end);
 	return 0;
 }
@@ -4662,9 +4696,11 @@  static int validate_slab_node(struct kmem_cache *s,
 		validate_slab(s, page);
 		count++;
 	}
-	if (count != n->nr_partial)
+	if (count != n->nr_partial) {
 		pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",
 		       s->name, count, n->nr_partial);
+		slab_add_kunit_errors();
+	}

 	if (!(s->flags & SLAB_STORE_USER))
 		goto out;
@@ -4673,16 +4709,18 @@  static int validate_slab_node(struct kmem_cache *s,
 		validate_slab(s, page);
 		count++;
 	}
-	if (count != atomic_long_read(&n->nr_slabs))
+	if (count != atomic_long_read(&n->nr_slabs)) {
 		pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
 		       s->name, count, atomic_long_read(&n->nr_slabs));
+		slab_add_kunit_errors();
+	}

 out:
 	spin_unlock_irqrestore(&n->list_lock, flags);
 	return count;
 }

-static long validate_slab_cache(struct kmem_cache *s)
+long validate_slab_cache(struct kmem_cache *s)
 {
 	int node;
 	unsigned long count = 0;
@@ -4694,6 +4732,8 @@  static long validate_slab_cache(struct kmem_cache *s)

 	return count;
 }
+EXPORT_SYMBOL(validate_slab_cache);
+
 /*
  * Generate lists of code addresses where slabcache objects are allocated
  * and freed.