diff mbox series

[1/1] lib: Fix spelling mistakes in header files

Message ID 20210608021932.12581-2-thunder.leizhen@huawei.com (mailing list archive)
State New
Headers show
Series lib: Fix spelling mistakes in header files | expand

Commit Message

Zhen Lei June 8, 2021, 2:19 a.m. UTC
Fix some spelling mistakes in comments found by "codespell":
Hoever ==> However
poiter ==> pointer
representaion ==> representation
uppon ==> upon
independend ==> independent
aquired ==> acquired
mis-match ==> mismatch
scrach ==> scratch
struture ==> structure
Analagous ==> Analogous
interation ==> iteration

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/bootconfig.h      | 2 +-
 include/linux/cpumask.h         | 2 +-
 include/linux/debugobjects.h    | 2 +-
 include/linux/lru_cache.h       | 8 ++++----
 include/linux/nodemask.h        | 6 +++---
 include/linux/percpu-refcount.h | 2 +-
 include/linux/scatterlist.h     | 2 +-
 7 files changed, 12 insertions(+), 12 deletions(-)

Comments

Masami Hiramatsu June 9, 2021, 12:18 a.m. UTC | #1
On Tue, 8 Jun 2021 10:19:32 +0800
Zhen Lei <thunder.leizhen@huawei.com> wrote:

> Fix some spelling mistakes in comments found by "codespell":
> Hoever ==> However
> poiter ==> pointer
> representaion ==> representation
> uppon ==> upon
> independend ==> independent
> aquired ==> acquired
> mis-match ==> mismatch
> scrach ==> scratch
> struture ==> structure
> Analagous ==> Analogous
> interation ==> iteration
> 
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  include/linux/bootconfig.h      | 2 +-

Looks good to me for the bootconfig.h.

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>

Thanks,

>  include/linux/cpumask.h         | 2 +-
>  include/linux/debugobjects.h    | 2 +-
>  include/linux/lru_cache.h       | 8 ++++----
>  include/linux/nodemask.h        | 6 +++---
>  include/linux/percpu-refcount.h | 2 +-
>  include/linux/scatterlist.h     | 2 +-
>  7 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
> index 2696eb0fc149..3dc0b7ed4b58 100644
> --- a/include/linux/bootconfig.h
> +++ b/include/linux/bootconfig.h
> @@ -165,7 +165,7 @@ static inline struct xbc_node * __init xbc_find_node(const char *key)
>   * is stroed to @anode and @value. If the @node doesn't have @key node,
>   * it does nothing.
>   * Note that even if the found key node has only one value (not array)
> - * this executes block once. Hoever, if the found key node has no value
> + * this executes block once. However, if the found key node has no value
>   * (key-only node), this does nothing. So don't use this for testing the
>   * key-value pair existence.
>   */
> diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
> index bfc4690de4f4..f3689a52bfd0 100644
> --- a/include/linux/cpumask.h
> +++ b/include/linux/cpumask.h
> @@ -259,7 +259,7 @@ extern int cpumask_next_wrap(int n, const struct cpumask *mask, int start, bool
>  /**
>   * for_each_cpu_wrap - iterate over every cpu in a mask, starting at a specified location
>   * @cpu: the (optionally unsigned) integer iterator
> - * @mask: the cpumask poiter
> + * @mask: the cpumask pointer
>   * @start: the start location
>   *
>   * The implementation does not assume any bit in @mask is set (including @start).
> diff --git a/include/linux/debugobjects.h b/include/linux/debugobjects.h
> index 8d2dde23e9fb..32444686b6ff 100644
> --- a/include/linux/debugobjects.h
> +++ b/include/linux/debugobjects.h
> @@ -18,7 +18,7 @@ enum debug_obj_state {
>  struct debug_obj_descr;
>  
>  /**
> - * struct debug_obj - representaion of an tracked object
> + * struct debug_obj - representation of an tracked object
>   * @node:	hlist node to link the object into the tracker list
>   * @state:	tracked object state
>   * @astate:	current active state
> diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
> index 429d67d815ce..f65c6734be3c 100644
> --- a/include/linux/lru_cache.h
> +++ b/include/linux/lru_cache.h
> @@ -32,7 +32,7 @@ This header file (and its .c file; kernel-doc of functions see there)
>    Because of this later property, it is called "lru_cache".
>    As it actually Tracks Objects in an Active SeT, we could also call it
>    toast (incidentally that is what may happen to the data on the
> -  backend storage uppon next resync, if we don't get it right).
> +  backend storage upon next resync, if we don't get it right).
>  
>  What for?
>  
> @@ -152,7 +152,7 @@ struct lc_element {
>  	 * for paranoia, and for "lc_element_to_index" */
>  	unsigned lc_index;
>  	/* if we want to track a larger set of objects,
> -	 * it needs to become arch independend u64 */
> +	 * it needs to become arch independent u64 */
>  	unsigned lc_number;
>  	/* special label when on free list */
>  #define LC_FREE (~0U)
> @@ -263,7 +263,7 @@ extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char
>   *
>   * Allows (expects) the set to be "dirty".  Note that the reference counts and
>   * order on the active and lru lists may still change.  Used to serialize
> - * changing transactions.  Returns true if we aquired the lock.
> + * changing transactions.  Returns true if we acquired the lock.
>   */
>  static inline int lc_try_lock_for_transaction(struct lru_cache *lc)
>  {
> @@ -275,7 +275,7 @@ static inline int lc_try_lock_for_transaction(struct lru_cache *lc)
>   * @lc: the lru cache to operate on
>   *
>   * Note that the reference counts and order on the active and lru lists may
> - * still change.  Only works on a "clean" set.  Returns true if we aquired the
> + * still change.  Only works on a "clean" set.  Returns true if we acquired the
>   * lock, which means there are no pending changes, and any further attempt to
>   * change the set will not succeed until the next lc_unlock().
>   */
> diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
> index ac398e143c9a..cfa21b78b8d5 100644
> --- a/include/linux/nodemask.h
> +++ b/include/linux/nodemask.h
> @@ -119,7 +119,7 @@ static inline const unsigned long *__nodemask_pr_bits(const nodemask_t *m)
>   * The inline keyword gives the compiler room to decide to inline, or
>   * not inline a function as it sees best.  However, as these functions
>   * are called in both __init and non-__init functions, if they are not
> - * inlined we will end up with a section mis-match error (of the type of
> + * inlined we will end up with a section mismatch error (of the type of
>   * freeable items not being freed).  So we must use __always_inline here
>   * to fix the problem.  If other functions in the future also end up in
>   * this situation they will also need to be annotated as __always_inline
> @@ -515,7 +515,7 @@ static inline int node_random(const nodemask_t *mask)
>  #define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
>  
>  /*
> - * For nodemask scrach area.
> + * For nodemask scratch area.
>   * NODEMASK_ALLOC(type, name) allocates an object with a specified type and
>   * name.
>   */
> @@ -528,7 +528,7 @@ static inline int node_random(const nodemask_t *mask)
>  #define NODEMASK_FREE(m)			do {} while (0)
>  #endif
>  
> -/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
> +/* A example structure for using NODEMASK_ALLOC, used in mempolicy. */
>  struct nodemask_scratch {
>  	nodemask_t	mask1;
>  	nodemask_t	mask2;
> diff --git a/include/linux/percpu-refcount.h b/include/linux/percpu-refcount.h
> index 16c35a728b4c..ae16a9856305 100644
> --- a/include/linux/percpu-refcount.h
> +++ b/include/linux/percpu-refcount.h
> @@ -213,7 +213,7 @@ static inline void percpu_ref_get_many(struct percpu_ref *ref, unsigned long nr)
>   * percpu_ref_get - increment a percpu refcount
>   * @ref: percpu_ref to get
>   *
> - * Analagous to atomic_long_inc().
> + * Analogous to atomic_long_inc().
>   *
>   * This function is safe to call as long as @ref is between init and exit.
>   */
> diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
> index 6f70572b2938..ecf87484814f 100644
> --- a/include/linux/scatterlist.h
> +++ b/include/linux/scatterlist.h
> @@ -474,7 +474,7 @@ sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter)
>   * Iterates over sg entries mapping page-by-page.  On each successful
>   * iteration, @miter->page points to the mapped page and
>   * @miter->length bytes of data can be accessed at @miter->addr.  As
> - * long as an interation is enclosed between start and stop, the user
> + * long as an iteration is enclosed between start and stop, the user
>   * is free to choose control structure and when to stop.
>   *
>   * @miter->consumed is set to @miter->length on each iteration.  It
> -- 
> 2.25.1
> 
>
Joe Perches June 9, 2021, 12:28 a.m. UTC | #2
On Wed, 2021-06-09 at 09:18 +0900, Masami Hiramatsu wrote:
> On Tue, 8 Jun 2021 10:19:32 +0800
> Zhen Lei <thunder.leizhen@huawei.com> wrote:
> 
> > Fix some spelling mistakes in comments found by "codespell":

Another:

> > diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
[]
> > @@ -165,7 +165,7 @@ static inline struct xbc_node * __init xbc_find_node(const char *key)
> >   * is stroed to @anode and @value. If the @node doesn't have @key node,

stroed/stored

> >   * it does nothing.
Zhen Lei June 9, 2021, 1:11 a.m. UTC | #3
On 2021/6/9 8:28, Joe Perches wrote:
> On Wed, 2021-06-09 at 09:18 +0900, Masami Hiramatsu wrote:
>> On Tue, 8 Jun 2021 10:19:32 +0800
>> Zhen Lei <thunder.leizhen@huawei.com> wrote:
>>
>>> Fix some spelling mistakes in comments found by "codespell":
> 
> Another:
> 
>>> diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
> []
>>> @@ -165,7 +165,7 @@ static inline struct xbc_node * __init xbc_find_node(const char *key)
>>>   * is stroed to @anode and @value. If the @node doesn't have @key node,
> 
> stroed/stored

Good eye, I will fix it in V2.

> 
>>>   * it does nothing.
> 
> 
> 
> .
>
diff mbox series

Patch

diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
index 2696eb0fc149..3dc0b7ed4b58 100644
--- a/include/linux/bootconfig.h
+++ b/include/linux/bootconfig.h
@@ -165,7 +165,7 @@  static inline struct xbc_node * __init xbc_find_node(const char *key)
  * is stroed to @anode and @value. If the @node doesn't have @key node,
  * it does nothing.
  * Note that even if the found key node has only one value (not array)
- * this executes block once. Hoever, if the found key node has no value
+ * this executes block once. However, if the found key node has no value
  * (key-only node), this does nothing. So don't use this for testing the
  * key-value pair existence.
  */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index bfc4690de4f4..f3689a52bfd0 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -259,7 +259,7 @@  extern int cpumask_next_wrap(int n, const struct cpumask *mask, int start, bool
 /**
  * for_each_cpu_wrap - iterate over every cpu in a mask, starting at a specified location
  * @cpu: the (optionally unsigned) integer iterator
- * @mask: the cpumask poiter
+ * @mask: the cpumask pointer
  * @start: the start location
  *
  * The implementation does not assume any bit in @mask is set (including @start).
diff --git a/include/linux/debugobjects.h b/include/linux/debugobjects.h
index 8d2dde23e9fb..32444686b6ff 100644
--- a/include/linux/debugobjects.h
+++ b/include/linux/debugobjects.h
@@ -18,7 +18,7 @@  enum debug_obj_state {
 struct debug_obj_descr;
 
 /**
- * struct debug_obj - representaion of an tracked object
+ * struct debug_obj - representation of an tracked object
  * @node:	hlist node to link the object into the tracker list
  * @state:	tracked object state
  * @astate:	current active state
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 429d67d815ce..f65c6734be3c 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -32,7 +32,7 @@  This header file (and its .c file; kernel-doc of functions see there)
   Because of this later property, it is called "lru_cache".
   As it actually Tracks Objects in an Active SeT, we could also call it
   toast (incidentally that is what may happen to the data on the
-  backend storage uppon next resync, if we don't get it right).
+  backend storage upon next resync, if we don't get it right).
 
 What for?
 
@@ -152,7 +152,7 @@  struct lc_element {
 	 * for paranoia, and for "lc_element_to_index" */
 	unsigned lc_index;
 	/* if we want to track a larger set of objects,
-	 * it needs to become arch independend u64 */
+	 * it needs to become arch independent u64 */
 	unsigned lc_number;
 	/* special label when on free list */
 #define LC_FREE (~0U)
@@ -263,7 +263,7 @@  extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char
  *
  * Allows (expects) the set to be "dirty".  Note that the reference counts and
  * order on the active and lru lists may still change.  Used to serialize
- * changing transactions.  Returns true if we aquired the lock.
+ * changing transactions.  Returns true if we acquired the lock.
  */
 static inline int lc_try_lock_for_transaction(struct lru_cache *lc)
 {
@@ -275,7 +275,7 @@  static inline int lc_try_lock_for_transaction(struct lru_cache *lc)
  * @lc: the lru cache to operate on
  *
  * Note that the reference counts and order on the active and lru lists may
- * still change.  Only works on a "clean" set.  Returns true if we aquired the
+ * still change.  Only works on a "clean" set.  Returns true if we acquired the
  * lock, which means there are no pending changes, and any further attempt to
  * change the set will not succeed until the next lc_unlock().
  */
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index ac398e143c9a..cfa21b78b8d5 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -119,7 +119,7 @@  static inline const unsigned long *__nodemask_pr_bits(const nodemask_t *m)
  * The inline keyword gives the compiler room to decide to inline, or
  * not inline a function as it sees best.  However, as these functions
  * are called in both __init and non-__init functions, if they are not
- * inlined we will end up with a section mis-match error (of the type of
+ * inlined we will end up with a section mismatch error (of the type of
  * freeable items not being freed).  So we must use __always_inline here
  * to fix the problem.  If other functions in the future also end up in
  * this situation they will also need to be annotated as __always_inline
@@ -515,7 +515,7 @@  static inline int node_random(const nodemask_t *mask)
 #define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
 
 /*
- * For nodemask scrach area.
+ * For nodemask scratch area.
  * NODEMASK_ALLOC(type, name) allocates an object with a specified type and
  * name.
  */
@@ -528,7 +528,7 @@  static inline int node_random(const nodemask_t *mask)
 #define NODEMASK_FREE(m)			do {} while (0)
 #endif
 
-/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
+/* A example structure for using NODEMASK_ALLOC, used in mempolicy. */
 struct nodemask_scratch {
 	nodemask_t	mask1;
 	nodemask_t	mask2;
diff --git a/include/linux/percpu-refcount.h b/include/linux/percpu-refcount.h
index 16c35a728b4c..ae16a9856305 100644
--- a/include/linux/percpu-refcount.h
+++ b/include/linux/percpu-refcount.h
@@ -213,7 +213,7 @@  static inline void percpu_ref_get_many(struct percpu_ref *ref, unsigned long nr)
  * percpu_ref_get - increment a percpu refcount
  * @ref: percpu_ref to get
  *
- * Analagous to atomic_long_inc().
+ * Analogous to atomic_long_inc().
  *
  * This function is safe to call as long as @ref is between init and exit.
  */
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 6f70572b2938..ecf87484814f 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -474,7 +474,7 @@  sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter)
  * Iterates over sg entries mapping page-by-page.  On each successful
  * iteration, @miter->page points to the mapped page and
  * @miter->length bytes of data can be accessed at @miter->addr.  As
- * long as an interation is enclosed between start and stop, the user
+ * long as an iteration is enclosed between start and stop, the user
  * is free to choose control structure and when to stop.
  *
  * @miter->consumed is set to @miter->length on each iteration.  It