diff mbox series

[093/147] phy/drivers/stm32: use HZ macros

Message ID 20210908025815.wkJV0R3Qx%akpm@linux-foundation.org (mailing list archive)
State New
Headers show
Series [001/147] mm, slub: don't call flush_all() from slab_debug_trace_open() | expand

Commit Message

Andrew Morton Sept. 8, 2021, 2:58 a.m. UTC 
From: Daniel Lezcano <daniel.lezcano@linaro.org>
Subject: phy/drivers/stm32: use HZ macros

HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.

Link: https://lkml.kernel.org/r/20210816114732.1834145-11-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Christian Eggers <ceggers@arri.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/phy/st/phy-stm32-usbphyc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

--- a/drivers/phy/st/phy-stm32-usbphyc.c~phy-drivers-stm32-use-hz-macros
+++ a/drivers/phy/st/phy-stm32-usbphyc.c
@@ -15,6 +15,7 @@ 
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/reset.h>
+#include <linux/units.h>
 
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
@@ -47,7 +48,6 @@ 
 #define PLL_FVCO_MHZ		2880
 #define PLL_INFF_MIN_RATE_HZ	19200000
 #define PLL_INFF_MAX_RATE_HZ	38400000
-#define HZ_PER_MHZ		1000000L
 
 struct pll_params {
 	u8 ndiv;