@@ -122,7 +122,7 @@ static enum es_result vc_read_mem(struct es_em_ctxt *ctxt,
static bool early_setup_sev_es(void)
{
if (!sev_es_negotiate_protocol())
- sev_es_terminate(GHCB_SEV_ES_PROT_UNSUPPORTED);
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_PROT_UNSUPPORTED);
if (set_page_decrypted((unsigned long)&boot_ghcb_page))
return false;
@@ -175,7 +175,7 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code)
enum es_result result;
if (!boot_ghcb && !early_setup_sev_es())
- sev_es_terminate(GHCB_SEV_ES_GEN_REQ);
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
vc_ghcb_invalidate(boot_ghcb);
result = vc_init_em_ctxt(&ctxt, regs, exit_code);
@@ -202,7 +202,7 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code)
if (result == ES_OK)
vc_finish_insn(&ctxt);
else if (result != ES_RETRY)
- sev_es_terminate(GHCB_SEV_ES_GEN_REQ);
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
}
static inline u64 rd_sev_status_msr(void)
@@ -73,9 +73,17 @@
/* GHCBData[23:16] */ \
((((u64)reason_val) & 0xff) << 16))
+/* Error codes from reason set 0 */
+#define SEV_TERM_SET_GEN 0
#define GHCB_SEV_ES_GEN_REQ 0
#define GHCB_SEV_ES_PROT_UNSUPPORTED 1
+/* Linux-specific reason codes (used with reason set 1) */
+#define SEV_TERM_SET_LINUX 1
+#define GHCB_TERM_REGISTER 0 /* GHCB GPA registration failure */
+#define GHCB_TERM_PSC 1 /* Page State Change failure */
+#define GHCB_TERM_PVALIDATE 2 /* Pvalidate failure */
+
#define GHCB_RESP_CODE(v) ((v) & GHCB_MSR_INFO_MASK)
#endif
@@ -24,15 +24,12 @@ static bool __init sev_es_check_cpu_features(void)
return true;
}
-static void __noreturn sev_es_terminate(unsigned int reason)
+static void __noreturn sev_es_terminate(unsigned int set, unsigned int reason)
{
u64 val = GHCB_MSR_TERM_REQ;
- /*
- * Tell the hypervisor what went wrong - only reason-set 0 is
- * currently supported.
- */
- val |= GHCB_SEV_TERM_REASON(0, reason);
+ /* Tell the hypervisor what went wrong. */
+ val |= GHCB_SEV_TERM_REASON(set, reason);
/* Request Guest Termination from Hypvervisor */
sev_es_wr_ghcb_msr(val);
@@ -221,7 +218,7 @@ void __init do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code)
fail:
/* Terminate the guest */
- sev_es_terminate(GHCB_SEV_ES_GEN_REQ);
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
}
static enum es_result vc_insn_string_read(struct es_em_ctxt *ctxt,
@@ -1406,7 +1406,7 @@ DEFINE_IDTENTRY_VC_KERNEL(exc_vmm_communication)
show_regs(regs);
/* Ask hypervisor to sev_es_terminate */
- sev_es_terminate(GHCB_SEV_ES_GEN_REQ);
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
/* If that fails and we get here - just panic */
panic("Returned from Terminate-Request to Hypervisor\n");
@@ -1454,7 +1454,7 @@ bool __init handle_vc_boot_ghcb(struct pt_regs *regs)
/* Do initial setup or terminate the guest */
if (unlikely(boot_ghcb == NULL && !sev_es_setup_ghcb()))
- sev_es_terminate(GHCB_SEV_ES_GEN_REQ);
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
vc_ghcb_invalidate(boot_ghcb);
GHCB specification defines the reason code for reason set 0. The reason codes defined in the set 0 do not cover all possible causes for a guest to request termination. The reason set 1 to 255 is reserved for the vendor-specific codes. Reseve the reason set 1 for the Linux guest. Define an error codes for reason set 1. While at it, change the sev_es_terminate() to accept the reason set parameter. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> --- arch/x86/boot/compressed/sev.c | 6 +++--- arch/x86/include/asm/sev-common.h | 8 ++++++++ arch/x86/kernel/sev-shared.c | 11 ++++------- arch/x86/kernel/sev.c | 4 ++-- 4 files changed, 17 insertions(+), 12 deletions(-)