| Message ID | 20230120141002.2442-6-ysionneau@kalray.eu (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Upstream kvx Linux port | expand |
On 20/01/2023 15:09, Yann Sionneau wrote: > From: Jules Maselbas <jmaselbas@kalray.eu> > > Add documentation for `kalray,coolidge-itgen` binding. > > Co-developed-by: Jules Maselbas <jmaselbas@kalray.eu> > Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> > Signed-off-by: Yann Sionneau <ysionneau@kalray.eu> The same comments apply plus more... > --- > > Notes: > V1 -> V2: new patch > > .../kalray,coolidge-itgen.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml > new file mode 100644 > index 000000000000..47b503bff1d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license. Checkpatch should complain about this - did you run it? This applies to all your other patches (both, run checkpatch and use proper license). > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/interrupt-controller/kalray,coolidge-itgen# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Kalray Coolidge SoC Interrupt Generator (ITGEN) > + > +description: | > + The Interrupt Generator (ITGEN) is an interrupt controller block. > + It's purpose is to convert IRQ lines coming from SoC peripherals into writes > + on the AXI bus. The ITGEN intended purpose is to write into the APIC mailboxes. > + > +allOf: > + - $ref: /schemas/interrupt-controller.yaml# > + > +properties: > + compatible: > + const: kalray,coolidge-itgen > + So why suddenly this patch has proper blank lines... Missing reg. > + "#interrupt-cells": > + const: 2 > + description: | > + - 1st cell is for the IRQ number > + - 2nd cell is for the trigger type as defined dt-bindings/interrupt-controller/irq.h > + > + interrupt-controller: true > + > + msi-parent: true > + > +required: > + - compatible > + - reg > + - "#interrupt-cells" > + - interrupt-controller > + - msi-parent > + > +examples: > + - | > + itgen: interrupt-controller@27000000 { > + compatible = "kalray,coolidge-itgen"; > + reg = <0 0x27000000 0 0x1104>; > + #interrupt-cells = <2>; > + interrupt-controller; > + msi-parent = <&apic_mailbox>; > + }; > + > +... Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml new file mode 100644 index 000000000000..47b503bff1d9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-itgen.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/kalray,coolidge-itgen# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kalray Coolidge SoC Interrupt Generator (ITGEN) + +description: | + The Interrupt Generator (ITGEN) is an interrupt controller block. + It's purpose is to convert IRQ lines coming from SoC peripherals into writes + on the AXI bus. The ITGEN intended purpose is to write into the APIC mailboxes. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + const: kalray,coolidge-itgen + + "#interrupt-cells": + const: 2 + description: | + - 1st cell is for the IRQ number + - 2nd cell is for the trigger type as defined dt-bindings/interrupt-controller/irq.h + + interrupt-controller: true + + msi-parent: true + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + - msi-parent + +examples: + - | + itgen: interrupt-controller@27000000 { + compatible = "kalray,coolidge-itgen"; + reg = <0 0x27000000 0 0x1104>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&apic_mailbox>; + }; + +...