[PATCHv4,01/12] dmapool: add alloc/free performance test

Commit Message

Keith Busch Jan. 26, 2023, 9:51 p.m. UTC

From: Keith Busch <[e-mail]>

Provide a module that allocates and frees many blocks of various sizes
and report how long it takes. This is intended to provide a consistent
way to measure how changes to the dma_pool_alloc/free routines affect
timing.

Signed-off-by: Keith Busch <[e-mail]>
---
 mm/Kconfig        |   9 +++
 mm/Makefile       |   1 +
 mm/dmapool_test.c | 147 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 157 insertions(+)
 create mode 100644 mm/dmapool_test.c

Patch

diff --git a/mm/Kconfig b/mm/Kconfig
index ebfe5796adf83..28ee03f39e93f 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -1099,6 +1099,15 @@  comment "GUP_TEST needs to have DEBUG_FS enabled"
 config GUP_GET_PXX_LOW_HIGH
 	bool
 
+config DMAPOOL_TEST
+	tristate "Enable a module to run time tests on dma_pool"
+	depends on HAS_DMA
+	help
+	  Provides a test module that will allocate and free many blocks of
+	  various sizes and report how long it takes. This is intended to
+	  provide a consistent way to measure how changes to the
+	  dma_pool_alloc/free routines affect performance.
+
 config ARCH_HAS_PTE_SPECIAL
 	bool
 
diff --git a/mm/Makefile b/mm/Makefile
index 8e105e5b3e293..3a08f5d7b1782 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -103,6 +103,7 @@  obj-$(CONFIG_MEMCG) += swap_cgroup.o
 endif
 obj-$(CONFIG_CGROUP_HUGETLB) += hugetlb_cgroup.o
 obj-$(CONFIG_GUP_TEST) += gup_test.o
+obj-$(CONFIG_DMAPOOL_TEST) += dmapool_test.o
 obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o
 obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
 obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
diff --git a/mm/dmapool_test.c b/mm/dmapool_test.c
new file mode 100644
index 0000000000000..370fb9e209eff
--- /dev/null
+++ b/mm/dmapool_test.c
@@ -0,0 +1,147 @@ 
+#include <linux/device.h>
+#include <linux/dma-map-ops.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+
+#define NR_TESTS (100)
+
+struct dma_pool_pair {
+	dma_addr_t dma;
+	void *v;
+};
+
+struct dmapool_parms {
+	size_t size;
+	size_t align;
+	size_t boundary;
+};
+
+static const struct dmapool_parms pool_parms[] = {
+	{ .size = 16, .align = 16, .boundary = 0 },
+	{ .size = 64, .align = 64, .boundary = 0 },
+	{ .size = 256, .align = 256, .boundary = 0 },
+	{ .size = 1024, .align = 1024, .boundary = 0 },
+	{ .size = 4096, .align = 4096, .boundary = 0 },
+	{ .size = 68, .align = 32, .boundary = 4096 },
+};
+
+static struct dma_pool *pool;
+static struct device test_dev;
+static u64 dma_mask;
+
+static inline int nr_blocks(int size)
+{
+	return clamp_t(int, (PAGE_SIZE / size) * 512, 1024, 8192);
+}
+
+static int dmapool_test_alloc(struct dma_pool_pair *p, int blocks)
+{
+	int i;
+
+	for (i = 0; i < blocks; i++) {
+		p[i].v = dma_pool_alloc(pool, GFP_KERNEL,
+					&p[i].dma);
+		if (!p[i].v)
+			goto pool_fail;
+	}
+
+	for (i = 0; i < blocks; i++)
+		dma_pool_free(pool, p[i].v, p[i].dma);
+
+	return 0;
+
+pool_fail:
+	for (--i; i >= 0; i--)
+		dma_pool_free(pool, p[i].v, p[i].dma);
+	return -ENOMEM;
+}
+
+static int dmapool_test_block(const struct dmapool_parms *parms)
+{
+	int blocks = nr_blocks(parms->size);
+	ktime_t start_time, end_time;
+	struct dma_pool_pair *p;
+	int i, ret;
+
+	p = kcalloc(blocks, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	pool = dma_pool_create("test pool", &test_dev, parms->size,
+			       parms->align, parms->boundary);
+	if (!pool) {
+		ret = -ENOMEM;
+		goto free_pairs;
+	}
+
+	start_time = ktime_get();
+	for (i = 0; i < NR_TESTS; i++) {
+		ret = dmapool_test_alloc(p, blocks);
+		if (ret)
+			goto free_pool;
+		if (need_resched())
+			cond_resched();
+	}
+	end_time = ktime_get();
+
+	printk("dmapool test: size:%-4zu align:%-4zu blocks:%-4d time:%llu\n",
+		parms->size, parms->align, blocks,
+		ktime_us_delta(end_time, start_time));
+
+free_pool:
+	dma_pool_destroy(pool);
+free_pairs:
+	kfree(p);
+	return ret;
+}
+
+static void dmapool_test_release(struct device *dev)
+{
+}
+
+static int dmapool_checks(void)
+{
+	int i, ret;
+
+	ret = dev_set_name(&test_dev, "dmapool-test");
+	if (ret)
+		return ret;
+
+	ret = device_register(&test_dev);
+	if (ret) {
+		printk("%s: register failed:%d\n", __func__, ret);
+		goto put_device;
+	}
+
+	test_dev.release = dmapool_test_release;
+	set_dma_ops(&test_dev, NULL);
+	test_dev.dma_mask = &dma_mask;
+	ret = dma_set_mask_and_coherent(&test_dev, DMA_BIT_MASK(64));
+	if (ret) {
+		printk("%s: mask failed:%d\n", __func__, ret);
+		goto del_device;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pool_parms); i++) {
+		ret = dmapool_test_block(&pool_parms[i]);
+		if (ret)
+			break;
+	}
+
+del_device:
+	device_del(&test_dev);
+put_device:
+	put_device(&test_dev);
+	return ret;
+}
+
+static void dmapool_exit(void)
+{
+}
+
+module_init(dmapool_checks);
+module_exit(dmapool_exit);
+MODULE_LICENSE("GPL");