diff mbox series

mm: memtest: convert to memtest_report_meminfo()

Message ID 20230808012156.88924-1-wangkefeng.wang@huawei.com (mailing list archive)
State New
Headers show
Series mm: memtest: convert to memtest_report_meminfo() | expand

Commit Message

Kefeng Wang Aug. 8, 2023, 1:21 a.m. UTC
It is better to not expose too many internal variables of memtest,
add a helper memtest_report_meminfo() to show memtest results.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 fs/proc/meminfo.c        | 12 +-----------
 include/linux/memblock.h | 10 ++++------
 mm/memtest.c             | 19 +++++++++++++++++--
 3 files changed, 22 insertions(+), 19 deletions(-)

Comments

Matthew Wilcox Aug. 8, 2023, 1:11 a.m. UTC | #1
On Tue, Aug 08, 2023 at 09:21:56AM +0800, Kefeng Wang wrote:
> @@ -117,3 +118,17 @@ void __init early_memtest(phys_addr_t start, phys_addr_t end)
>  		do_one_pass(patterns[idx], start, end);
>  	}
>  }
> +
> +void memtest_report_meminfo(struct seq_file *m)
> +{
> +	unsigned long early_memtest_bad_size_kb;
> +
> +	if (!early_memtest_done)
> +		return;
> +
> +	early_memtest_bad_size_kb = early_memtest_bad_size >> 10;
> +	if (early_memtest_bad_size && !early_memtest_bad_size_kb)
> +		early_memtest_bad_size_kb = 1;
> +	/* When 0 is reported, it means there actually was a successful test */
> +	seq_printf(m, "EarlyMemtestBad:   %5lu kB\n", early_memtest_bad_size_kb);
> +}

Doesn't this function need to be under CONFIG_PROC_FS ?
Kefeng Wang Aug. 8, 2023, 1:32 a.m. UTC | #2
On 2023/8/8 9:11, Matthew Wilcox wrote:
> On Tue, Aug 08, 2023 at 09:21:56AM +0800, Kefeng Wang wrote:
>> @@ -117,3 +118,17 @@ void __init early_memtest(phys_addr_t start, phys_addr_t end)
>>   		do_one_pass(patterns[idx], start, end);
>>   	}
>>   }
>> +
>> +void memtest_report_meminfo(struct seq_file *m)
>> +{
>> +	unsigned long early_memtest_bad_size_kb;

   if (!IS_ENABLED(CONFIG_PROC_FS))
           return;

>> +
>> +	if (!early_memtest_done)
>> +		return;
>> +
>> +	early_memtest_bad_size_kb = early_memtest_bad_size >> 10;
>> +	if (early_memtest_bad_size && !early_memtest_bad_size_kb)
>> +		early_memtest_bad_size_kb = 1;
>> +	/* When 0 is reported, it means there actually was a successful test */
>> +	seq_printf(m, "EarlyMemtestBad:   %5lu kB\n", early_memtest_bad_size_kb);
>> +}
> 
> Doesn't this function need to be under CONFIG_PROC_FS ?

Thanks for reminder, will add above check to eliminate code by compiler
>
diff mbox series

Patch

diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index 74e3c3815696..45af9a989d40 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -133,17 +133,7 @@  static int meminfo_proc_show(struct seq_file *m, void *v)
 	show_val_kb(m, "VmallocChunk:   ", 0ul);
 	show_val_kb(m, "Percpu:         ", pcpu_nr_pages());
 
-#ifdef CONFIG_MEMTEST
-	if (early_memtest_done) {
-		unsigned long early_memtest_bad_size_kb;
-
-		early_memtest_bad_size_kb = early_memtest_bad_size>>10;
-		if (early_memtest_bad_size && !early_memtest_bad_size_kb)
-			early_memtest_bad_size_kb = 1;
-		/* When 0 is reported, it means there actually was a successful test */
-		seq_printf(m, "EarlyMemtestBad:   %5lu kB\n", early_memtest_bad_size_kb);
-	}
-#endif
+	memtest_report_meminfo(m);
 
 #ifdef CONFIG_MEMORY_FAILURE
 	seq_printf(m, "HardwareCorrupted: %5lu kB\n",
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 0d031fbfea25..1c1072e3ca06 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -594,13 +594,11 @@  extern int hashdist;		/* Distribute hashes across NUMA nodes? */
 #endif
 
 #ifdef CONFIG_MEMTEST
-extern phys_addr_t early_memtest_bad_size;	/* Size of faulty ram found by memtest */
-extern bool early_memtest_done;			/* Was early memtest done? */
-extern void early_memtest(phys_addr_t start, phys_addr_t end);
+void early_memtest(phys_addr_t start, phys_addr_t end);
+void memtest_report_meminfo(struct seq_file *m);
 #else
-static inline void early_memtest(phys_addr_t start, phys_addr_t end)
-{
-}
+static inline void early_memtest(phys_addr_t start, phys_addr_t end) { }
+static inline void memtest_report_meminfo(struct seq_file *m) { }
 #endif
 
 
diff --git a/mm/memtest.c b/mm/memtest.c
index 57149dfee438..3b9891431124 100644
--- a/mm/memtest.c
+++ b/mm/memtest.c
@@ -3,9 +3,10 @@ 
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/memblock.h>
+#include <linux/seq_file.h>
 
-bool early_memtest_done;
-phys_addr_t early_memtest_bad_size;
+static bool early_memtest_done;
+static phys_addr_t early_memtest_bad_size;
 
 static u64 patterns[] __initdata = {
 	/* The first entry has to be 0 to leave memtest with zeroed memory */
@@ -117,3 +118,17 @@  void __init early_memtest(phys_addr_t start, phys_addr_t end)
 		do_one_pass(patterns[idx], start, end);
 	}
 }
+
+void memtest_report_meminfo(struct seq_file *m)
+{
+	unsigned long early_memtest_bad_size_kb;
+
+	if (!early_memtest_done)
+		return;
+
+	early_memtest_bad_size_kb = early_memtest_bad_size >> 10;
+	if (early_memtest_bad_size && !early_memtest_bad_size_kb)
+		early_memtest_bad_size_kb = 1;
+	/* When 0 is reported, it means there actually was a successful test */
+	seq_printf(m, "EarlyMemtestBad:   %5lu kB\n", early_memtest_bad_size_kb);
+}