@@ -162,6 +162,13 @@ in memory) as follows:
Note that swapping due to writeback is not disabled with this option.
+Compression could also fail during a zswap store attempt. In many cases, it is
+nevertheless beneficial to store the page in the zswap pool (in its
+uncompressed form) for the sake of maintaining the LRU ordering, which will
+be useful for reclaim. This can be enabled as follows:
+
+ echo Y > /sys/module/zswap/parameters/uncompressed_pages_enabled
+
When there is a sizable amount of cold memory residing in the zswap pool, it
can be advantageous to proactively write these cold pages to swap and reclaim
the memory for other use cases. By default, the zswap shrinker is disabled.
@@ -62,6 +62,8 @@ static u64 zswap_pool_limit_hit;
static u64 zswap_written_back_pages;
/* Store failed due to a reclaim failure after pool limit was reached */
static u64 zswap_reject_reclaim_fail;
+/* Compression step fails during store attempt */
+static u64 zswap_reject_compress_fail;
/* Compressed page was too big for the allocator to (optimally) store */
static u64 zswap_reject_compress_poor;
/* Store failed because underlying allocator could not get memory */
@@ -142,6 +144,10 @@ bool zswap_bypass_swap_when_store_fail_enabled;
module_param_named(bypass_swap_when_store_fail_enabled,
zswap_bypass_swap_when_store_fail_enabled, bool, 0644);
+static bool zswap_uncompressed_pages_enabled;
+module_param_named(uncompressed_pages_enabled,
+ zswap_uncompressed_pages_enabled, bool, 0644);
+
static bool zswap_exclusive_loads_enabled = IS_ENABLED(
CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON);
module_param_named(exclusive_loads, zswap_exclusive_loads_enabled, bool, 0644);
@@ -224,6 +230,7 @@ struct zswap_pool {
* value - value of the same-value filled pages which have same content
* objcg - the obj_cgroup that the compressed memory is charged to
* lru - handle to the pool's lru used to evict pages.
+ * is_uncompressed - whether the page is stored in its uncompressed form.
*/
struct zswap_entry {
struct rb_node rbnode;
@@ -238,6 +245,7 @@ struct zswap_entry {
struct obj_cgroup *objcg;
int nid;
struct list_head lru;
+ bool is_uncompressed;
};
/*
@@ -1307,7 +1315,7 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
struct crypto_acomp_ctx *acomp_ctx;
struct zpool *pool = zswap_find_zpool(entry);
bool page_was_allocated;
- u8 *src, *tmp = NULL;
+ u8 *src, *dst, *tmp = NULL;
unsigned int dlen;
int ret;
struct writeback_control wbc = {
@@ -1356,6 +1364,19 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
dlen = PAGE_SIZE;
src = zpool_map_handle(pool, entry->handle, ZPOOL_MM_RO);
+ if (entry->is_uncompressed) {
+ if (!zpool_can_sleep_mapped(pool))
+ kfree(tmp);
+
+ dst = kmap_local_page(page);
+ copy_page(dst, src);
+ kunmap_local(dst);
+ zpool_unmap_handle(pool, entry->handle);
+
+ ret = 0;
+ goto success;
+ }
+
if (!zpool_can_sleep_mapped(pool)) {
memcpy(tmp, src, entry->length);
src = tmp;
@@ -1376,6 +1397,7 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
else
zpool_unmap_handle(pool, entry->handle);
+success:
BUG_ON(ret);
BUG_ON(dlen != PAGE_SIZE);
@@ -1454,7 +1476,7 @@ bool zswap_store(struct folio *folio)
char *buf;
u8 *src, *dst;
gfp_t gfp;
- int ret;
+ int ret, compress_ret;
VM_WARN_ON_ONCE(!folio_test_locked(folio));
VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
@@ -1569,11 +1591,15 @@ bool zswap_store(struct folio *folio)
* but in different threads running on different cpu, we have different
* acomp instance, so multiple threads can do (de)compression in parallel.
*/
- ret = crypto_wait_req(crypto_acomp_compress(acomp_ctx->req), &acomp_ctx->wait);
+ compress_ret = crypto_wait_req(crypto_acomp_compress(acomp_ctx->req),
+ &acomp_ctx->wait);
dlen = acomp_ctx->req->dlen;
- if (ret)
- goto put_dstmem;
+ if (compress_ret) {
+ zswap_reject_compress_fail++;
+ if (!zswap_uncompressed_pages_enabled)
+ goto put_dstmem;
+ }
/* store */
zpool = zswap_find_zpool(entry);
@@ -1590,7 +1616,15 @@ bool zswap_store(struct folio *folio)
goto put_dstmem;
}
buf = zpool_map_handle(zpool, handle, ZPOOL_MM_WO);
- memcpy(buf, dst, dlen);
+
+ /* Compressor failed. Store the page in its uncompressed form. */
+ if (compress_ret) {
+ dlen = PAGE_SIZE;
+ src = kmap_local_page(page);
+ copy_page(buf, src);
+ kunmap_local(src);
+ } else
+ memcpy(buf, dst, dlen);
zpool_unmap_handle(zpool, handle);
mutex_unlock(acomp_ctx->mutex);
@@ -1598,6 +1632,7 @@ bool zswap_store(struct folio *folio)
entry->swpentry = swp_entry(type, offset);
entry->handle = handle;
entry->length = dlen;
+ entry->is_uncompressed = compress_ret;
insert_entry:
entry->objcg = objcg;
@@ -1687,6 +1722,17 @@ bool zswap_load(struct folio *folio)
}
zpool = zswap_find_zpool(entry);
+
+ if (entry->is_uncompressed) {
+ src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
+ dst = kmap_local_page(page);
+ copy_page(dst, src);
+ kunmap_local(dst);
+ zpool_unmap_handle(zpool, entry->handle);
+ ret = true;
+ goto stats;
+ }
+
if (!zpool_can_sleep_mapped(zpool)) {
tmp = kmalloc(entry->length, GFP_KERNEL);
if (!tmp) {
@@ -1855,6 +1901,8 @@ static int zswap_debugfs_init(void)
zswap_debugfs_root, &zswap_reject_alloc_fail);
debugfs_create_u64("reject_kmemcache_fail", 0444,
zswap_debugfs_root, &zswap_reject_kmemcache_fail);
+ debugfs_create_u64("reject_compress_fail", 0444,
+ zswap_debugfs_root, &zswap_reject_compress_fail);
debugfs_create_u64("reject_compress_poor", 0444,
zswap_debugfs_root, &zswap_reject_compress_poor);
debugfs_create_u64("written_back_pages", 0444,
In a zswap store, the compression step could fail, leaving the pages out of the zswap pool. This could happen, for instance, when the pages hold random data (such as /dev/urandom). This behavior can potentially create unnecessary LRU inversion: warm but incompressible pages are swapped out, whereas cold compressible pages reside in the zswap pool. This could incur IO later when the warmer pages are indeed required again. We can instead just store the original page in the zswap pool. Storing PAGE_SIZE objects is already supported by zsmalloc, zswap's default backend allocator. When these pages are needed (either for a zswap load or for writeback), we can simply copy the original content into the desired buffer. This patch allows zswap to store uncompressed pages. The feature can be enabled at runtime via a new parameter. In addition, we add a counter to track the number of times the compression step fails for diagnostics. Signed-off-by: Nhat Pham <nphamcs@gmail.com> --- Documentation/admin-guide/mm/zswap.rst | 7 +++ mm/zswap.c | 60 +++++++++++++++++++++++--- 2 files changed, 61 insertions(+), 6 deletions(-)