| Message ID | 20240719093338.55117-4-linyunsheng@huawei.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [RFC,v11,01/14] mm: page_frag: add a test module for page_frag | expand |
On Fri, Jul 19, 2024 at 2:37 AM Yunsheng Lin <linyunsheng@huawei.com> wrote: > > We are about to use page_frag_alloc_*() API to not just > allocate memory for skb->data, but also use them to do > the memory allocation for skb frag too. Currently the > implementation of page_frag in mm subsystem is running > the offset as a countdown rather than count-up value, > there may have several advantages to that as mentioned > in [1], but it may have some disadvantages, for example, > it may disable skb frag coaleasing and more correct cache > prefetching You misspelled "coalescing". > We have a trade-off to make in order to have a unified > implementation and API for page_frag, so use a initial zero > offset in this patch, and the following patch will try to > make some optimization to avoid the disadvantages as much > as possible. > > Rename 'offset' to 'remaining' to retain the 'countdown' > behavior as 'remaining countdown' instead of 'offset > countdown'. Also, Renaming enable us to do a single > 'fragsz > remaining' checking for the case of cache not > being enough, which should be the fast path if we ensure > 'remaining' is zero when 'va' == NULL by memset'ing > 'struct page_frag_cache' in page_frag_cache_init() and > page_frag_cache_drain(). > > 1. https://lore.kernel.org/all/f4abe71b3439b39d17a6fb2d410180f367cadf5c.camel@gmail.com/ > > CC: Alexander Duyck <alexander.duyck@gmail.com> > Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> > --- > include/linux/mm_types_task.h | 4 +- > mm/page_frag_cache.c | 71 +++++++++++++++++++++-------------- > 2 files changed, 44 insertions(+), 31 deletions(-) > > diff --git a/include/linux/mm_types_task.h b/include/linux/mm_types_task.h > index cdc1e3696439..b1c54b2b9308 100644 > --- a/include/linux/mm_types_task.h > +++ b/include/linux/mm_types_task.h > @@ -52,10 +52,10 @@ struct page_frag { > struct page_frag_cache { > void *va; > #if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) > - __u16 offset; > + __u16 remaining; > __u16 size; > #else > - __u32 offset; > + __u32 remaining; > #endif > /* we maintain a pagecount bias, so that we dont dirty cache line > * containing page->_refcount every time we allocate a fragment. > diff --git a/mm/page_frag_cache.c b/mm/page_frag_cache.c > index 609a485cd02a..2958fe006fe7 100644 > --- a/mm/page_frag_cache.c > +++ b/mm/page_frag_cache.c > @@ -22,6 +22,7 @@ > static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, > gfp_t gfp_mask) > { > + unsigned int page_size = PAGE_FRAG_CACHE_MAX_SIZE; > struct page *page = NULL; > gfp_t gfp = gfp_mask; > > @@ -30,12 +31,21 @@ static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, > __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC; > page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, > PAGE_FRAG_CACHE_MAX_ORDER); > - nc->size = page ? PAGE_FRAG_CACHE_MAX_SIZE : PAGE_SIZE; > #endif > - if (unlikely(!page)) > + if (unlikely(!page)) { > page = alloc_pages_node(NUMA_NO_NODE, gfp, 0); > + if (unlikely(!page)) { > + nc->va = NULL; > + return NULL; > + } > > - nc->va = page ? page_address(page) : NULL; > + page_size = PAGE_SIZE; > + } > + > +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) > + nc->size = page_size; > +#endif > + nc->va = page_address(page); > > return page; > } Not a huge fan of the changes here. If we are changing the direction then just do that. I don't see the point of these changes. As far as I can tell it is just adding noise to the diff and has no effect on the final code as the outcome is mostly the same except for you don't update size in the event that you overwrite nc->va to NULL. > @@ -64,8 +74,8 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc, > unsigned int align_mask) > { > unsigned int size = PAGE_SIZE; > + unsigned int remaining; > struct page *page; > - int offset; > > if (unlikely(!nc->va)) { > refill: > @@ -82,35 +92,20 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc, > */ > page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE); > > - /* reset page count bias and offset to start of new frag */ > + /* reset page count bias and remaining to start of new frag */ > nc->pfmemalloc = page_is_pfmemalloc(page); > nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; > - nc->offset = size; > + nc->remaining = size; > } > > - offset = nc->offset - fragsz; > - if (unlikely(offset < 0)) { > - page = virt_to_page(nc->va); > - > - if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) > - goto refill; > - > - if (unlikely(nc->pfmemalloc)) { > - free_unref_page(page, compound_order(page)); > - goto refill; > - } > - > #if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) > - /* if size can vary use size else just use PAGE_SIZE */ > - size = nc->size; > + /* if size can vary use size else just use PAGE_SIZE */ > + size = nc->size; > #endif Rather than pulling this out and placing it here it might make more sense at the start of the function. Basically just overwrite size w/ either PAGE_SIZE or nc->size right at the start. Then if we have to reallocate we overwrite it. That way we can avoid some redundancy and this will be easier to read. > - /* OK, page count is 0, we can safely set it */ > - set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); > > - /* reset page count bias and offset to start of new frag */ > - nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; > - offset = size - fragsz; > - if (unlikely(offset < 0)) { > + remaining = nc->remaining & align_mask; > + if (unlikely(remaining < fragsz)) { > + if (unlikely(fragsz > PAGE_SIZE)) { > /* > * The caller is trying to allocate a fragment > * with fragsz > PAGE_SIZE but the cache isn't big > @@ -122,13 +117,31 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc, > */ > return NULL; > } > + > + page = virt_to_page(nc->va); > + > + if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) > + goto refill; > + > + if (unlikely(nc->pfmemalloc)) { > + free_unref_page(page, compound_order(page)); > + goto refill; > + } > + > + /* OK, page count is 0, we can safely set it */ > + set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); > + > + /* reset page count bias and remaining to start of new frag */ > + nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; > + nc->remaining = size; Why are you setting nc->remaining here? You set it a few lines below. This is redundant. > + > + remaining = size; > } > > nc->pagecnt_bias--; > - offset &= align_mask; > - nc->offset = offset; > + nc->remaining = remaining - fragsz; > > - return nc->va + offset; > + return nc->va + (size - remaining); > } > EXPORT_SYMBOL(__page_frag_alloc_align);
diff --git a/include/linux/mm_types_task.h b/include/linux/mm_types_task.h index cdc1e3696439..b1c54b2b9308 100644 --- a/include/linux/mm_types_task.h +++ b/include/linux/mm_types_task.h @@ -52,10 +52,10 @@ struct page_frag { struct page_frag_cache { void *va; #if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - __u16 offset; + __u16 remaining; __u16 size; #else - __u32 offset; + __u32 remaining; #endif /* we maintain a pagecount bias, so that we dont dirty cache line * containing page->_refcount every time we allocate a fragment. diff --git a/mm/page_frag_cache.c b/mm/page_frag_cache.c index 609a485cd02a..2958fe006fe7 100644 --- a/mm/page_frag_cache.c +++ b/mm/page_frag_cache.c @@ -22,6 +22,7 @@ static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, gfp_t gfp_mask) { + unsigned int page_size = PAGE_FRAG_CACHE_MAX_SIZE; struct page *page = NULL; gfp_t gfp = gfp_mask; @@ -30,12 +31,21 @@ static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC; page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, PAGE_FRAG_CACHE_MAX_ORDER); - nc->size = page ? PAGE_FRAG_CACHE_MAX_SIZE : PAGE_SIZE; #endif - if (unlikely(!page)) + if (unlikely(!page)) { page = alloc_pages_node(NUMA_NO_NODE, gfp, 0); + if (unlikely(!page)) { + nc->va = NULL; + return NULL; + } - nc->va = page ? page_address(page) : NULL; + page_size = PAGE_SIZE; + } + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + nc->size = page_size; +#endif + nc->va = page_address(page); return page; } @@ -64,8 +74,8 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc, unsigned int align_mask) { unsigned int size = PAGE_SIZE; + unsigned int remaining; struct page *page; - int offset; if (unlikely(!nc->va)) { refill: @@ -82,35 +92,20 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc, */ page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE); - /* reset page count bias and offset to start of new frag */ + /* reset page count bias and remaining to start of new frag */ nc->pfmemalloc = page_is_pfmemalloc(page); nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; - nc->offset = size; + nc->remaining = size; } - offset = nc->offset - fragsz; - if (unlikely(offset < 0)) { - page = virt_to_page(nc->va); - - if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) - goto refill; - - if (unlikely(nc->pfmemalloc)) { - free_unref_page(page, compound_order(page)); - goto refill; - } - #if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - /* if size can vary use size else just use PAGE_SIZE */ - size = nc->size; + /* if size can vary use size else just use PAGE_SIZE */ + size = nc->size; #endif - /* OK, page count is 0, we can safely set it */ - set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); - /* reset page count bias and offset to start of new frag */ - nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; - offset = size - fragsz; - if (unlikely(offset < 0)) { + remaining = nc->remaining & align_mask; + if (unlikely(remaining < fragsz)) { + if (unlikely(fragsz > PAGE_SIZE)) { /* * The caller is trying to allocate a fragment * with fragsz > PAGE_SIZE but the cache isn't big @@ -122,13 +117,31 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc, */ return NULL; } + + page = virt_to_page(nc->va); + + if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) + goto refill; + + if (unlikely(nc->pfmemalloc)) { + free_unref_page(page, compound_order(page)); + goto refill; + } + + /* OK, page count is 0, we can safely set it */ + set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); + + /* reset page count bias and remaining to start of new frag */ + nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; + nc->remaining = size; + + remaining = size; } nc->pagecnt_bias--; - offset &= align_mask; - nc->offset = offset; + nc->remaining = remaining - fragsz; - return nc->va + offset; + return nc->va + (size - remaining); } EXPORT_SYMBOL(__page_frag_alloc_align);
We are about to use page_frag_alloc_*() API to not just allocate memory for skb->data, but also use them to do the memory allocation for skb frag too. Currently the implementation of page_frag in mm subsystem is running the offset as a countdown rather than count-up value, there may have several advantages to that as mentioned in [1], but it may have some disadvantages, for example, it may disable skb frag coaleasing and more correct cache prefetching We have a trade-off to make in order to have a unified implementation and API for page_frag, so use a initial zero offset in this patch, and the following patch will try to make some optimization to avoid the disadvantages as much as possible. Rename 'offset' to 'remaining' to retain the 'countdown' behavior as 'remaining countdown' instead of 'offset countdown'. Also, Renaming enable us to do a single 'fragsz > remaining' checking for the case of cache not being enough, which should be the fast path if we ensure 'remaining' is zero when 'va' == NULL by memset'ing 'struct page_frag_cache' in page_frag_cache_init() and page_frag_cache_drain(). 1. https://lore.kernel.org/all/f4abe71b3439b39d17a6fb2d410180f367cadf5c.camel@gmail.com/ CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> --- include/linux/mm_types_task.h | 4 +- mm/page_frag_cache.c | 71 +++++++++++++++++++++-------------- 2 files changed, 44 insertions(+), 31 deletions(-)