diff mbox series

[v3,27/39] arm64: kasan: Enable in-kernel MTE

Message ID 20326c060cd1535b15a0df43d1b9627a329f2277.1600987622.git.andreyknvl@google.com (mailing list archive)
State New, archived
Headers show
Series kasan: add hardware tag-based mode for arm64 | expand

Commit Message

Andrey Konovalov Sept. 24, 2020, 10:50 p.m. UTC 
From: Vincenzo Frascino <vincenzo.frascino@arm.com>

Hardware tag-based KASAN relies on Memory Tagging Extension (MTE)
feature and requires it to be enabled.

The Tag Checking operation causes a synchronous data abort as
a consequence of a tag check fault when MTE is configured in
synchronous mode.

Enable MTE in Synchronous mode in EL1 to provide a more immediate
way of tag check failure detection in the kernel.

As part of this change enable match-all tag for EL1 to allow the
kernel to access user pages without faulting. This is required because
the kernel does not have knowledge of the tags set by the user in a
page.

Note: For MTE, the TCF bit field in SCTLR_EL1 affects only EL1 in a
similar way as TCF0 affects EL0.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
---
Change-Id: I4d67497268bb7f0c2fc5dcacefa1e273df4af71d
---
 arch/arm64/kernel/cpufeature.c |  7 +++++++
 arch/arm64/mm/proc.S           | 11 +++++++++++
 2 files changed, 18 insertions(+)

Comments

Catalin Marinas Sept. 25, 2020, 11:14 a.m. UTC | #1 
On Fri, Sep 25, 2020 at 12:50:34AM +0200, Andrey Konovalov wrote:
> diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
> index 23c326a06b2d..12ba98bc3b3f 100644
> --- a/arch/arm64/mm/proc.S
> +++ b/arch/arm64/mm/proc.S
> @@ -427,6 +427,10 @@ SYM_FUNC_START(__cpu_setup)
>  	 */
>  	mov_q	x5, MAIR_EL1_SET
>  #ifdef CONFIG_ARM64_MTE
> +	mte_tcr	.req	x20
> +
> +	mov	mte_tcr, #0
> +
>  	/*
>  	 * Update MAIR_EL1, GCR_EL1 and TFSR*_EL1 if MTE is supported
>  	 * (ID_AA64PFR1_EL1[11:8] > 1).
> @@ -447,6 +451,9 @@ SYM_FUNC_START(__cpu_setup)
>  	/* clear any pending tag check faults in TFSR*_EL1 */
>  	msr_s	SYS_TFSR_EL1, xzr
>  	msr_s	SYS_TFSRE0_EL1, xzr
> +
> +	/* set the TCR_EL1 bits */
> +	orr	mte_tcr, mte_tcr, #SYS_TCR_EL1_TCMA1
>  1:
>  #endif
>  	msr	mair_el1, x5
> @@ -457,6 +464,10 @@ SYM_FUNC_START(__cpu_setup)
>  	mov_q	x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
>  			TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
>  			TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS
> +#ifdef CONFIG_ARM64_MTE
> +	orr	x10, x10, mte_tcr
> +	.unreq	mte_tcr
> +#endif
>  	tcr_clear_errata_bits x10, x9, x5

I had a slightly different preference (see the previous version) to
avoid the #ifdef altogether but this works as well.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
diff mbox series

Patch

diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index add9da5d8ea3..eca06b8c74db 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1718,6 +1718,13 @@  static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 		cleared_zero_page = true;
 		mte_clear_page_tags(lm_alias(empty_zero_page));
 	}
+
+	/* Enable in-kernel MTE only if KASAN_HW_TAGS is enabled */
+	if (IS_ENABLED(CONFIG_KASAN_HW_TAGS)) {
+		/* Enable MTE Sync Mode for EL1 */
+		sysreg_clear_set(sctlr_el1, SCTLR_ELx_TCF_MASK, SCTLR_ELx_TCF_SYNC);
+		isb();
+	}
 }
 #endif /* CONFIG_ARM64_MTE */
 
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 23c326a06b2d..12ba98bc3b3f 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -427,6 +427,10 @@  SYM_FUNC_START(__cpu_setup)
 	 */
 	mov_q	x5, MAIR_EL1_SET
 #ifdef CONFIG_ARM64_MTE
+	mte_tcr	.req	x20
+
+	mov	mte_tcr, #0
+
 	/*
 	 * Update MAIR_EL1, GCR_EL1 and TFSR*_EL1 if MTE is supported
 	 * (ID_AA64PFR1_EL1[11:8] > 1).
@@ -447,6 +451,9 @@  SYM_FUNC_START(__cpu_setup)
 	/* clear any pending tag check faults in TFSR*_EL1 */
 	msr_s	SYS_TFSR_EL1, xzr
 	msr_s	SYS_TFSRE0_EL1, xzr
+
+	/* set the TCR_EL1 bits */
+	orr	mte_tcr, mte_tcr, #SYS_TCR_EL1_TCMA1
 1:
 #endif
 	msr	mair_el1, x5
@@ -457,6 +464,10 @@  SYM_FUNC_START(__cpu_setup)
 	mov_q	x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
 			TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
 			TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS
+#ifdef CONFIG_ARM64_MTE
+	orr	x10, x10, mte_tcr
+	.unreq	mte_tcr
+#endif
 	tcr_clear_errata_bits x10, x9, x5
 
 #ifdef CONFIG_ARM64_VA_BITS_52