@@ -538,6 +538,24 @@ static int sanity_check_tdx_memory(void)
return 0;
}
+/* TDMR must be 1gb aligned */
+#define TDMR_ALIGNMENT BIT_ULL(30)
+#define TDMR_PFN_ALIGNMENT (TDMR_ALIGNMENT >> PAGE_SHIFT)
+
+/* Align up and down the address to TDMR boundary */
+#define TDMR_ALIGN_DOWN(_addr) ALIGN_DOWN((_addr), TDMR_ALIGNMENT)
+#define TDMR_ALIGN_UP(_addr) ALIGN((_addr), TDMR_ALIGNMENT)
+
+static inline u64 tdmr_start(struct tdmr_info *tdmr)
+{
+ return tdmr->base;
+}
+
+static inline u64 tdmr_end(struct tdmr_info *tdmr)
+{
+ return tdmr->base + tdmr->size;
+}
+
/* Calculate the actual TDMR_INFO size */
static inline int cal_tdmr_size(void)
{
@@ -575,14 +593,98 @@ static struct tdmr_info *alloc_tdmr_array(int *array_sz)
return alloc_pages_exact(*array_sz, GFP_KERNEL | __GFP_ZERO);
}
+static struct tdmr_info *tdmr_array_entry(struct tdmr_info *tdmr_array,
+ int idx)
+{
+ return (struct tdmr_info *)((unsigned long)tdmr_array +
+ cal_tdmr_size() * idx);
+}
+
+/*
+ * Create TDMRs to cover all TDX memory regions. The actual number
+ * of TDMRs is set to @tdmr_num.
+ */
+static int create_tdmrs(struct tdmr_info *tdmr_array, int *tdmr_num)
+{
+ struct tdx_memblock *tmb;
+ int tdmr_idx = 0;
+
+ /*
+ * Loop over TDX memory regions and create TDMRs to cover them.
+ * To keep it simple, always try to use one TDMR to cover
+ * one memory region.
+ */
+ list_for_each_entry(tmb, &tdx_memlist, list) {
+ struct tdmr_info *tdmr;
+ u64 start, end;
+
+ tdmr = tdmr_array_entry(tdmr_array, tdmr_idx);
+ start = TDMR_ALIGN_DOWN(tmb->start_pfn << PAGE_SHIFT);
+ end = TDMR_ALIGN_UP(tmb->end_pfn << PAGE_SHIFT);
+
+ /*
+ * If the current TDMR's size hasn't been initialized,
+ * it is a new TDMR to cover the new memory region.
+ * Otherwise, the current TDMR has already covered the
+ * previous memory region. In the latter case, check
+ * whether the current memory region has been fully or
+ * partially covered by the current TDMR, since TDMR is
+ * 1G aligned.
+ */
+ if (tdmr->size) {
+ /*
+ * Loop to the next memory region if the current
+ * block has already been fully covered by the
+ * current TDMR.
+ */
+ if (end <= tdmr_end(tdmr))
+ continue;
+
+ /*
+ * If part of the current memory region has
+ * already been covered by the current TDMR,
+ * skip the already covered part.
+ */
+ if (start < tdmr_end(tdmr))
+ start = tdmr_end(tdmr);
+
+ /*
+ * Create a new TDMR to cover the current memory
+ * region, or the remaining part of it.
+ */
+ tdmr_idx++;
+ if (tdmr_idx >= tdx_sysinfo.max_tdmrs)
+ return -E2BIG;
+
+ tdmr = tdmr_array_entry(tdmr_array, tdmr_idx);
+ }
+
+ tdmr->base = start;
+ tdmr->size = end - start;
+ }
+
+ /* @tdmr_idx is always the index of last valid TDMR. */
+ *tdmr_num = tdmr_idx + 1;
+
+ return 0;
+}
+
/*
* Construct an array of TDMRs to cover all TDX memory ranges.
* The actual number of TDMRs is kept to @tdmr_num.
*/
static int construct_tdmrs(struct tdmr_info *tdmr_array, int *tdmr_num)
{
+ int ret;
+
+ ret = create_tdmrs(tdmr_array, tdmr_num);
+ if (ret)
+ goto err;
+
/* Return -EINVAL until constructing TDMRs is done */
- return -EINVAL;
+ ret = -EINVAL;
+err:
+ return ret;
}
/*
The kernel configures TDX-usable memory regions by passing an array of "TD Memory Regions" (TDMRs) to the TDX module. Each TDMR contains the information of the base/size of a memory region, the base/size of the associated Physical Address Metadata Table (PAMT) and a list of reserved areas in the region. Create a number of TDMRs to cover all TDX memory regions. To keep it simple, always try to create one TDMR for each memory region. As the first step only set up the base/size for each TDMR. Each TDMR must be 1G aligned and the size must be in 1G granularity. This implies that one TDMR could cover multiple memory regions. If a memory region spans the 1GB boundary and the former part is already covered by the previous TDMR, just create a new TDMR for the remaining part. TDX only supports a limited number of TDMRs. Disable TDX if all TDMRs are consumed but there is more memory region to cover. Signed-off-by: Kai Huang <kai.huang@intel.com> --- v5 -> v6: - Rebase due to using 'tdx_memblock' instead of memblock. - v3 -> v5 (no feedback on v4): - Removed allocating TDMR individually. - Improved changelog by using Dave's words. - Made TDMR_START() and TDMR_END() as static inline function. --- arch/x86/virt/vmx/tdx/tdx.c | 104 +++++++++++++++++++++++++++++++++++- 1 file changed, 103 insertions(+), 1 deletion(-)