diff mbox series

[v2,2/2] mm/numa_balancing:Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy

Message ID 369d6a58758396335fd1176d97bbca4e7730d75a.1709909210.git.donettom@linux.ibm.com (mailing list archive)
State New
Headers show
Series Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy | expand

Commit Message

Donet Tom March 8, 2024, 3:15 p.m. UTC
commit bda420b98505 ("numa balancing: migrate on fault among multiple bound
nodes") added support for migrate on protnone reference with MPOL_BIND
memory policy. This allowed numa fault migration when the executing node
is part of the policy mask for MPOL_BIND. This patch extends migration
support to MPOL_PREFERRED_MANY policy.

Currently, we cannot specify MPOL_PREFERRED_MANY with the mempolicy flag
MPOL_F_NUMA_BALANCING. This causes issues when we want to use
NUMA_BALANCING_MEMORY_TIERING. To effectively use the slow memory tier,
the kernel should not allocate pages from the slower memory tier via
allocation control zonelist fallback. Instead, we should move cold pages
from the faster memory node via memory demotion. For a page allocation,
kswapd is only woken up after we try to allocate pages from all nodes in
the allocation zone list. This implies that, without using memory
policies, we will end up allocating hot pages in the slower memory tier.

MPOL_PREFERRED_MANY was added by commit b27abaccf8e8 ("mm/mempolicy: add
MPOL_PREFERRED_MANY for multiple preferred nodes") to allow better
allocation control when we have memory tiers in the system. With
MPOL_PREFERRED_MANY, the user can use a policy node mask consisting only
of faster memory nodes. When we fail to allocate pages from the faster
memory node, kswapd would be woken up, allowing demotion of cold pages
to slower memory nodes.

With the current kernel, such usage of memory policies implies we can't
do page promotion from a slower memory tier to a faster memory tier
using numa fault. This patch fixes this issue.

For MPOL_PREFERRED_MANY, if the executing node is in the policy node
mask, we allow numa migration to the executing nodes. If the executing
node is not in the policy node mask, we do not allow numa migration.

Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
---
 mm/mempolicy.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

Comments

Huang, Ying March 11, 2024, 1:37 a.m. UTC | #1
Donet Tom <donettom@linux.ibm.com> writes:

> commit bda420b98505 ("numa balancing: migrate on fault among multiple bound
> nodes") added support for migrate on protnone reference with MPOL_BIND
> memory policy. This allowed numa fault migration when the executing node
> is part of the policy mask for MPOL_BIND. This patch extends migration
> support to MPOL_PREFERRED_MANY policy.
>
> Currently, we cannot specify MPOL_PREFERRED_MANY with the mempolicy flag
> MPOL_F_NUMA_BALANCING. This causes issues when we want to use
> NUMA_BALANCING_MEMORY_TIERING. To effectively use the slow memory tier,
> the kernel should not allocate pages from the slower memory tier via
> allocation control zonelist fallback. Instead, we should move cold pages
> from the faster memory node via memory demotion. For a page allocation,
> kswapd is only woken up after we try to allocate pages from all nodes in
> the allocation zone list. This implies that, without using memory
> policies, we will end up allocating hot pages in the slower memory tier.
>
> MPOL_PREFERRED_MANY was added by commit b27abaccf8e8 ("mm/mempolicy: add
> MPOL_PREFERRED_MANY for multiple preferred nodes") to allow better
> allocation control when we have memory tiers in the system. With
> MPOL_PREFERRED_MANY, the user can use a policy node mask consisting only
> of faster memory nodes. When we fail to allocate pages from the faster
> memory node, kswapd would be woken up, allowing demotion of cold pages
> to slower memory nodes.
>
> With the current kernel, such usage of memory policies implies we can't
> do page promotion from a slower memory tier to a faster memory tier
> using numa fault. This patch fixes this issue.
>
> For MPOL_PREFERRED_MANY, if the executing node is in the policy node
> mask, we allow numa migration to the executing nodes. If the executing
> node is not in the policy node mask, we do not allow numa migration.
>
> Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
> Signed-off-by: Donet Tom <donettom@linux.ibm.com>
> ---
>  mm/mempolicy.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/mm/mempolicy.c b/mm/mempolicy.c
> index e635d7ed501b..ccd9c6c5fcf5 100644
> --- a/mm/mempolicy.c
> +++ b/mm/mempolicy.c
> @@ -1458,9 +1458,10 @@ static inline int sanitize_mpol_flags(int *mode, unsigned short *flags)
>  	if ((*flags & MPOL_F_STATIC_NODES) && (*flags & MPOL_F_RELATIVE_NODES))
>  		return -EINVAL;
>  	if (*flags & MPOL_F_NUMA_BALANCING) {
> -		if (*mode != MPOL_BIND)
> +		if (*mode == MPOL_BIND || *mode == MPOL_PREFERRED_MANY)
> +			*flags |= (MPOL_F_MOF | MPOL_F_MORON);
> +		else
>  			return -EINVAL;
> -		*flags |= (MPOL_F_MOF | MPOL_F_MORON);
>  	}
>  	return 0;
>  }
> @@ -2515,15 +2516,26 @@ int mpol_misplaced(struct folio *folio, struct vm_fault *vmf,
>  		break;
>  
>  	case MPOL_BIND:
> -		/* Optimize placement among multiple nodes via NUMA balancing */
> +	case MPOL_PREFERRED_MANY:
> +		/*
> +		 * Even though MPOL_PREFERRED_MANY can allocate pages outside
> +		 * policy nodemask we don't allow numa migration to nodes
> +		 * outside policy nodemask for now. This is done so that if we
> +		 * want demotion to slow memory to happen, before allocating
> +		 * from some DRAM node say 'x', we will end up using a
> +		 * MPOL_PREFERRED_MANY mask excluding node 'x'. In such scenario
> +		 * we should not promote to node 'x' from slow memory node.
> +		 */

This is a little hard to digest for me.  And, I don't think that we need
to put this policy choice in code comments.  It's better to put it in
patch description.  Where we can give more background, for example, to
avoid cross-socket traffic, etc.

Otherwise, the patchset looks good to me.  Thanks!

>  		if (pol->flags & MPOL_F_MORON) {
> +			/*
> +			 * Optimize placement among multiple nodes
> +			 * via NUMA balancing
> +			 */
>  			if (node_isset(thisnid, pol->nodes))
>  				break;
>  			goto out;
>  		}
> -		fallthrough;
>  
> -	case MPOL_PREFERRED_MANY:
>  		/*
>  		 * use current page if in policy nodemask,
>  		 * else select nearest allowed node, if any.

--
Best Regards,
Huang, Ying
Andrew Morton March 13, 2024, 3:51 p.m. UTC | #2
On Mon, 11 Mar 2024 09:37:36 +0800 "Huang, Ying" <ying.huang@intel.com> wrote:

> > @@ -2515,15 +2516,26 @@ int mpol_misplaced(struct folio *folio, struct vm_fault *vmf,
> >  		break;
> >  
> >  	case MPOL_BIND:
> > -		/* Optimize placement among multiple nodes via NUMA balancing */
> > +	case MPOL_PREFERRED_MANY:
> > +		/*
> > +		 * Even though MPOL_PREFERRED_MANY can allocate pages outside
> > +		 * policy nodemask we don't allow numa migration to nodes
> > +		 * outside policy nodemask for now. This is done so that if we
> > +		 * want demotion to slow memory to happen, before allocating
> > +		 * from some DRAM node say 'x', we will end up using a
> > +		 * MPOL_PREFERRED_MANY mask excluding node 'x'. In such scenario
> > +		 * we should not promote to node 'x' from slow memory node.
> > +		 */
> 
> This is a little hard to digest for me.  And, I don't think that we need
> to put this policy choice in code comments.  It's better to put it in
> patch description.  Where we can give more background, for example, to
> avoid cross-socket traffic, etc.

Oh.  I like the comment.  We could perhaps put additional detail in the
changelog, but using changelogs to understand the code is so darned
inconvenient.
diff mbox series

Patch

diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e635d7ed501b..ccd9c6c5fcf5 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1458,9 +1458,10 @@  static inline int sanitize_mpol_flags(int *mode, unsigned short *flags)
 	if ((*flags & MPOL_F_STATIC_NODES) && (*flags & MPOL_F_RELATIVE_NODES))
 		return -EINVAL;
 	if (*flags & MPOL_F_NUMA_BALANCING) {
-		if (*mode != MPOL_BIND)
+		if (*mode == MPOL_BIND || *mode == MPOL_PREFERRED_MANY)
+			*flags |= (MPOL_F_MOF | MPOL_F_MORON);
+		else
 			return -EINVAL;
-		*flags |= (MPOL_F_MOF | MPOL_F_MORON);
 	}
 	return 0;
 }
@@ -2515,15 +2516,26 @@  int mpol_misplaced(struct folio *folio, struct vm_fault *vmf,
 		break;
 
 	case MPOL_BIND:
-		/* Optimize placement among multiple nodes via NUMA balancing */
+	case MPOL_PREFERRED_MANY:
+		/*
+		 * Even though MPOL_PREFERRED_MANY can allocate pages outside
+		 * policy nodemask we don't allow numa migration to nodes
+		 * outside policy nodemask for now. This is done so that if we
+		 * want demotion to slow memory to happen, before allocating
+		 * from some DRAM node say 'x', we will end up using a
+		 * MPOL_PREFERRED_MANY mask excluding node 'x'. In such scenario
+		 * we should not promote to node 'x' from slow memory node.
+		 */
 		if (pol->flags & MPOL_F_MORON) {
+			/*
+			 * Optimize placement among multiple nodes
+			 * via NUMA balancing
+			 */
 			if (node_isset(thisnid, pol->nodes))
 				break;
 			goto out;
 		}
-		fallthrough;
 
-	case MPOL_PREFERRED_MANY:
 		/*
 		 * use current page if in policy nodemask,
 		 * else select nearest allowed node, if any.