[v0.1,0/7] mmc: tmio: refactor TMIO core a bit and add UniPhier SD/eMMC controller support

Message

Masahiro Yamada Aug. 7, 2018, 6:17 a.m. UTC

Add UniPhier SD/eMMC controller support.

As a preparation, I changed tmio_mmc_set_clock() to a platform hook.
The clock rate setting is platform-specific, and UniPhier variants
will add another way.  I thought it would be better to split this
to a hook to avoid a mess.



Masahiro Yamada (7):
  mmc: tmio: replace tmio_mmc_clk_stop() calls with tmio_mmc_set_clock()
  mmc: tmio: move tmio_mmc_set_clock() to platform hook
  dt-bindings: mmc: add DT binding for UniPhier SD/eMMC controller
  mmc: uniphier-sd: add UniPhier SD/eMMC controller driver
  mmc: renesas_sdhi: merge clk_{start,stop} functions to set_clock
  mmc: renesas_sdhi: refactor CLK_CTL bit calculation
  mmc: tmio: refactor CLK_CTL bit calculation

 .../devicetree/bindings/mmc/uniphier-sd.txt        |  60 ++
 MAINTAINERS                                        |   1 +
 drivers/mmc/host/Kconfig                           |  10 +
 drivers/mmc/host/Makefile                          |   1 +
 drivers/mmc/host/renesas_sdhi_core.c               |  40 +-
 drivers/mmc/host/tmio_mmc.c                        |  56 ++
 drivers/mmc/host/tmio_mmc.h                        |   4 +-
 drivers/mmc/host/tmio_mmc_core.c                   |  79 +--
 drivers/mmc/host/uniphier-sd.c                     | 694 +++++++++++++++++++++
 9 files changed, 869 insertions(+), 76 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/uniphier-sd.txt
 create mode 100644 drivers/mmc/host/uniphier-sd.c

Comments

Masahiro Yamada Aug. 7, 2018, 6:26 a.m. UTC | #1

2018-08-07 15:17 GMT+09:00 Masahiro Yamada <[e-mail]>:


> [v0.1 PATCH 0/7] mmc: tmio: refactor TMIO core a bit and add UniPhier SD/eMMC controller support


This series is v1.

v0.1 was the internal numbering, which I forgot to change.

Wolfram Sang Aug. 12, 2018, 4:24 p.m. UTC | #2

Hi Yamada-san,

> Add UniPhier SD/eMMC controller support.
> 
> As a preparation, I changed tmio_mmc_set_clock() to a platform hook.
> The clock rate setting is platform-specific, and UniPhier variants
> will add another way.  I thought it would be better to split this
> to a hook to avoid a mess.

Thanks for this series! I see you did not base it on the renaming
patches. I think is a good decision because it would be a complicated
dependency. I had a glimpse on the patches and the new hook looks good
to me. I want to do full review and testing within the next two weeks.
Then, I can also comment about re-implementing the internal DMA core
handling vs. factorizing it out. It may be fine this way, I simply can't
tell now.

Regards,

   Wolfram

> 
> 
> 
> Masahiro Yamada (7):
>   mmc: tmio: replace tmio_mmc_clk_stop() calls with tmio_mmc_set_clock()
>   mmc: tmio: move tmio_mmc_set_clock() to platform hook
>   dt-bindings: mmc: add DT binding for UniPhier SD/eMMC controller
>   mmc: uniphier-sd: add UniPhier SD/eMMC controller driver
>   mmc: renesas_sdhi: merge clk_{start,stop} functions to set_clock
>   mmc: renesas_sdhi: refactor CLK_CTL bit calculation
>   mmc: tmio: refactor CLK_CTL bit calculation
> 
>  .../devicetree/bindings/mmc/uniphier-sd.txt        |  60 ++
>  MAINTAINERS                                        |   1 +
>  drivers/mmc/host/Kconfig                           |  10 +
>  drivers/mmc/host/Makefile                          |   1 +
>  drivers/mmc/host/renesas_sdhi_core.c               |  40 +-
>  drivers/mmc/host/tmio_mmc.c                        |  56 ++
>  drivers/mmc/host/tmio_mmc.h                        |   4 +-
>  drivers/mmc/host/tmio_mmc_core.c                   |  79 +--
>  drivers/mmc/host/uniphier-sd.c                     | 694 +++++++++++++++++++++
>  9 files changed, 869 insertions(+), 76 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/uniphier-sd.txt
>  create mode 100644 drivers/mmc/host/uniphier-sd.c
> 
> -- 
> 2.7.4
>