mbox series

[v3,0/5] brcmfmac: sdio: Deal better w/ transmission errors related to idle

Message ID 20190607223716.119277-1-dianders@chromium.org (mailing list archive)
Headers show
Series brcmfmac: sdio: Deal better w/ transmission errors related to idle | expand

Message

Doug Anderson June 7, 2019, 10:37 p.m. UTC
This series attempts to deal better with the expected transmission
errors related to the idle states (handled by the Always-On-Subsystem
or AOS) on the SDIO-based WiFi on rk3288-veyron-minnie,
rk3288-veyron-speedy, and rk3288-veyron-mickey.

Some details about those errors can be found in
<https://crbug.com/960222>, but to summarize it here: if we try to
send the wakeup command to the WiFi card at the same time it has
decided to wake up itself then it will behave badly on the SDIO bus.
This can cause timeouts or CRC errors.

When I tested on 4.19 and 4.20 these CRC errors can be seen to cause
re-tuning.  Since I am currently developing on 4.19 this was the
original problem I attempted to solve.

On mainline it turns out that you don't see the retuning errors but
you see tons of spam about timeouts trying to wakeup from sleep.  I
tracked down the commit that was causing that and have partially
reverted it here.  I have no real knowledge about Broadcom WiFi, but
the commit that was causing problems sounds (from the descriptioin) to
be a hack commit penalizing all Broadcom WiFi users because of a bug
in a Cypress SD controller.  I will let others comment if this is
truly the case and, if so, what the right solution should be.

For v3 of this series I have added 2 patches to the end of the series
to address errors that would show up on systems with these same SDIO
WiFi cards when used on controllers that do periodic retuning.  These
systems need an extra fix to prevent the retuning from happening when
the card is asleep.

Changes in v3:
- Took out the spinlock since I believe this is all in one context.
- Expect errors for all of brcmf_sdio_kso_control() (Adrian).
- ("mmc: core: Export mmc_retune_hold_now() mmc_retune_release()") new for v3.
- ("brcmfmac: sdio: Don't tune while the card is off") new for v3.

Changes in v2:
- A full revert, not just a partial one (Arend).  ...with explicit Cc.
- Updated commit message to clarify based on discussion of v1.

Douglas Anderson (5):
  Revert "brcmfmac: disable command decode in sdio_aos"
  mmc: core: API for temporarily disabling auto-retuning due to errors
  brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  mmc: core: Export mmc_retune_hold_now() mmc_retune_release()
  brcmfmac: sdio: Don't tune while the card is off

 drivers/mmc/core/core.c                       | 19 +++++++++++++++++--
 drivers/mmc/core/host.c                       |  7 +++++++
 drivers/mmc/core/host.h                       |  7 -------
 .../broadcom/brcm80211/brcmfmac/sdio.c        | 18 +++++++++++++-----
 include/linux/mmc/core.h                      |  4 ++++
 include/linux/mmc/host.h                      |  1 +
 6 files changed, 42 insertions(+), 14 deletions(-)