| Message ID | 20230615090638.1771245-1-quic_srichara@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add minimal boot support for IPQ5018 | expand |
On 15.06.2023 11:06, Sricharan Ramabadhran wrote: > Add support for the global clock controller found on IPQ5018 > based devices. > > Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> > Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > + > +static const struct freq_tbl ftbl_apss_axi_clk_src[] = { > + F(400000000, P_GPLL0, 2, 0, 0), > + { } > +}; This is weirdly far away from its use. With that fixed: Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, Gateways and Access Points. This series adds minimal board boot support for ipq5018-rdp432-c2 board. [v10] Dropped patches 3,4 for pinctrl (was picked by Linus) Fixed hex number style in patch 2 as per Konrad's comments. [v9] Change only in patch 2/8 Sorted the headers and cleaned the unwanted ones Added trailing comma for .parent_hws member Removed the hunk touching ipq5332 kconfig (unintentionally) [v8] Changed only in patch 4/8 Fixed Kconfig to add COMPILE_TEST and removed header of.h. Instead using mod_devicetable.h. Added Linus reviewed-by [v7] Fixed tz reserved region size in patch 7/8 [v6] Fixed patch [4/8] pinctrl driver for rebase issue. [v5] Added Reviewed-by tags from Krzysztof Kozlowski. Changed patch [6/8] with [1] since its already Acked Rebased patch [4/8] on top of [2] and fixed other comments Fixed commit log for patch [7/8] Fixed comments for patch [2/8] [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1678164097-13247-4-git-send-email-quic_mmanikan@quicinc.com/ [2] https://lore.kernel.org/r/1683718725-14869-1-git-send-email-quic_rohiagar@quicinc.com [v4] Fixed all comments for clocks, schema, dts Added Reviewed-by tags. [v3] Fixed all comments for clocks, schema fixes Picked up Reviewed-by from Bjorn for pinctrl driver [v2] Fixed all comments and rebased for TOT. Manikanta Mylavarapu (1): dt-bindings: scm: Add compatible for IPQ5018 Sricharan Ramabadhran (5): dt-bindings: arm64: Add IPQ5018 clock and reset clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 dt-bindings: qcom: Add ipq5018 bindings arm64: dts: Add ipq5018 SoC and rdp432-c2 board support arm64: defconfig: Enable IPQ5018 SoC base configs .../devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/clock/qcom,ipq5018-gcc.yaml | 63 + .../bindings/firmware/qcom,scm.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 72 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 250 ++ arch/arm64/configs/defconfig | 3 + drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-ipq5018.c | 3724 +++++++++++++++++ include/dt-bindings/clock/qcom,gcc-ipq5018.h | 183 + include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 + 12 files changed, 4435 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi create mode 100644 drivers/clk/qcom/gcc-ipq5018.c create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h