diff mbox series

[v9,2/5] mmc: core: Enable the MMC host software queue for the SD card

Message ID 0065b4631fef2d61c3b89d14a4ea4f2b7499ea56.1581478568.git.baolin.wang7@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add MMC software queue support | expand

Commit Message

Baolin Wang Feb. 12, 2020, 4:12 a.m. UTC 
From: Baolin Wang <baolin.wang@linaro.org>

Enable the MMC host software queue for the SD card if the host controller
supports the MMC host software queue.

On my Spreadtrum platform, I did not see any obvious performance changes
in 4K block size when changing to use hsq for the SD cards, I think the
reason is the SD card works at a low speed on my platform, and most of
time is spent in the hardware. But we can see some obvious improvements
when enabling the packed request based on hsq, that's why we still add hsq
support for the SD cards.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
 drivers/mmc/core/sd.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index fe914ff..76c7add 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1082,6 +1082,16 @@  static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 		}
 	}
 
+	if (host->cqe_ops && !host->cqe_enabled) {
+		err = host->cqe_ops->cqe_enable(host, card);
+		if (!err) {
+			host->cqe_enabled = true;
+			host->hsq_enabled = true;
+			pr_info("%s: Host Software Queue enabled\n",
+				mmc_hostname(host));
+		}
+	}
+
 	if (host->caps2 & MMC_CAP2_AVOID_3_3V &&
 	    host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
 		pr_err("%s: Host failed to negotiate down from 3.3V\n",