diff mbox

[RFC,1/3] MMC: use CMD23 for multiblock transfers when we can.

Message ID 1302741523-22276-2-git-send-email-andreiw@motorola.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andrei Warkentin April 14, 2011, 12:38 a.m. UTC
CMD23-prefixed instead of open-ended multiblock transfers
have a performance advantage on some MMC cards.

Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
---
 drivers/mmc/card/block.c |   89 ++++++++++++++++++++++++++++++---------------
 include/linux/mmc/core.h |    1 +
 include/linux/mmc/host.h |    6 +++
 include/linux/mmc/mmc.h  |    6 +++
 4 files changed, 72 insertions(+), 30 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index c209953..282e6ef 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -55,10 +55,6 @@  MODULE_ALIAS("mmc:block");
 #define INAND_CMD38_ARG_SECTRIM1 0x81
 #define INAND_CMD38_ARG_SECTRIM2 0x88
 
-#define REL_WRITES_SUPPORTED(card) (mmc_card_mmc((card)) &&	\
-    (((card)->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||	\
-     ((card)->ext_csd.rel_sectors)))
-
 static DEFINE_MUTEX(block_mutex);
 
 /*
@@ -85,6 +81,10 @@  struct mmc_blk_data {
 	struct mmc_queue queue;
 	struct list_head part;
 
+	unsigned int	flags;
+#define MMC_BLK_CMD23	(1 << 0)	/* Can do SET_BLOCK_COUNT for multiblock */
+#define MMC_BLK_REL_WR	(1 << 1)	/* MMC Reliable write support */
+
 	unsigned int	usage;
 	unsigned int	read_only;
 	unsigned int	part_type;
@@ -225,6 +225,7 @@  static const struct block_device_operations mmc_bdops = {
 
 struct mmc_blk_request {
 	struct mmc_request	mrq;
+	struct mmc_command	sbc;
 	struct mmc_command	cmd;
 	struct mmc_command	stop;
 	struct mmc_data		data;
@@ -455,13 +456,10 @@  static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
  * reliable write can handle, thus finish the request in
  * partial completions.
  */
-static inline int mmc_apply_rel_rw(struct mmc_blk_request *brq,
-				   struct mmc_card *card,
-				   struct request *req)
+static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq,
+				    struct mmc_card *card,
+				    struct request *req)
 {
-	int err;
-	struct mmc_command set_count;
-
 	if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) {
 		/* Legacy mode imposes restrictions on transfers. */
 		if (!IS_ALIGNED(brq->cmd.arg, card->ext_csd.rel_sectors))
@@ -472,16 +470,6 @@  static inline int mmc_apply_rel_rw(struct mmc_blk_request *brq,
 		else if (brq->data.blocks < card->ext_csd.rel_sectors)
 			brq->data.blocks = 1;
 	}
-
-	memset(&set_count, 0, sizeof(struct mmc_command));
-	set_count.opcode = MMC_SET_BLOCK_COUNT;
-	set_count.arg = brq->data.blocks | (1 << 31);
-	set_count.flags = MMC_RSP_R1 | MMC_CMD_AC;
-	err = mmc_wait_for_cmd(card->host, &set_count, 0);
-	if (err)
-		printk(KERN_ERR "%s: error %d SET_BLOCK_COUNT\n",
-		       req->rq_disk->disk_name, err);
-	return err;
 }
 
 static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
@@ -498,7 +486,7 @@  static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 	bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
 			  (req->cmd_flags & REQ_META)) &&
 		(rq_data_dir(req) == WRITE) &&
-		REL_WRITES_SUPPORTED(card);
+		(md->flags & MMC_BLK_REL_WR);
 
 	do {
 		struct mmc_command cmd;
@@ -536,11 +524,9 @@  static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 
 		if (brq.data.blocks > 1 || do_rel_wr) {
 			/* SPI multiblock writes terminate using a special
-			 * token, not a STOP_TRANSMISSION request. Reliable
-			 * writes use SET_BLOCK_COUNT and do not use a
-			 * STOP_TRANSMISSION request either.
+			 * token, not a STOP_TRANSMISSION request.
 			 */
-			if ((!mmc_host_is_spi(card->host) && !do_rel_wr) ||
+			if (!mmc_host_is_spi(card->host) ||
 			    rq_data_dir(req) == READ)
 				brq.mrq.stop = &brq.stop;
 			readcmd = MMC_READ_MULTIPLE_BLOCK;
@@ -558,8 +544,32 @@  static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 			brq.data.flags |= MMC_DATA_WRITE;
 		}
 
-		if (do_rel_wr && mmc_apply_rel_rw(&brq, card, req))
-			goto cmd_err;
+		if (do_rel_wr)
+			mmc_apply_rel_rw(&brq, card, req);
+
+		/*
+		 * Pre-defined multi-block transfers are preferable to
+		 * open ended-ones (and necessary for reliable writes).
+		 * However, it is not sufficient to just send CMD23,
+		 * and avoid the final CMD12, as on an error condition
+		 * CMD12 (stop) needs to be sent anyway. This, coupled
+		 * with Auto-CMD23 enhancements provided by some
+		 * hosts, means that the complexity of dealing
+		 * with this is best left to the host. If CMD23 is
+		 * supported by card and host, we'll fill sbc in and let
+		 * the host deal with handling it correctly. This means
+		 * that for hosts that don't expose MMC_CAP_CMD23, no
+		 * change of behavior will be observed.
+		 */
+
+		if ((md->flags & MMC_BLK_CMD23) &&
+		    mmc_op_multi(brq.cmd.opcode)) {
+			brq.sbc.opcode = MMC_SET_BLOCK_COUNT;
+			brq.sbc.arg = brq.data.blocks |
+				(do_rel_wr ? (1 << 31) : 0);
+			brq.sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
+			brq.mrq.sbc = &brq.sbc;
+		}
 
 		mmc_set_data_timeout(&brq.data, card);
 
@@ -596,7 +606,8 @@  static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 		 * until later as we need to wait for the card to leave
 		 * programming mode even when things go wrong.
 		 */
-		if (brq.cmd.error || brq.data.error || brq.stop.error) {
+		if (brq.sbc.error || brq.cmd.error ||
+		    brq.data.error || brq.stop.error) {
 			if (brq.data.blocks > 1 && rq_data_dir(req) == READ) {
 				/* Redo read one sector at a time */
 				printk(KERN_WARNING "%s: retrying using single "
@@ -607,6 +618,13 @@  static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 			status = get_card_status(card, req);
 		}
 
+		if (brq.sbc.error) {
+			printk(KERN_ERR "%s: error %d sending SET_BLOCK_COUNT "
+			       "command, response %#x, card status %#x\n",
+			       req->rq_disk->disk_name, brq.sbc.error,
+			       brq.sbc.resp[0], status);
+		}
+
 		if (brq.cmd.error) {
 			printk(KERN_ERR "%s: error %d sending read/write "
 			       "command, response %#x, card status %#x\n",
@@ -804,8 +822,6 @@  static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	md->disk->queue = md->queue.queue;
 	md->disk->driverfs_dev = parent;
 	set_disk_ro(md->disk, md->read_only || default_ro);
-	if (REL_WRITES_SUPPORTED(card))
-		blk_queue_flush(md->queue.queue, REQ_FLUSH | REQ_FUA);
 
 	/*
 	 * As discussed on lkml, GENHD_FL_REMOVABLE should:
@@ -829,6 +845,19 @@  static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 
 	blk_queue_logical_block_size(md->queue.queue, 512);
 	set_capacity(md->disk, size);
+
+	if (mmc_host_cmd23(card->host) &&
+	    mmc_card_mmc(card))
+		md->flags |= MMC_BLK_CMD23;
+
+	if (mmc_card_mmc(card) &&
+	    md->flags & MMC_BLK_CMD23 &&
+	    ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||
+	     card->ext_csd.rel_sectors)) {
+		md->flags |= MMC_BLK_REL_WR;
+		blk_queue_flush(md->queue.queue, REQ_FLUSH | REQ_FUA);
+	}
+
 	return md;
 
  err_putdisk:
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index f8e4bcb..55d7fde 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -120,6 +120,7 @@  struct mmc_data {
 };
 
 struct mmc_request {
+	struct mmc_command	*sbc;		/* SET_BLOCK_COUNT for multiblock */
 	struct mmc_command	*cmd;
 	struct mmc_data		*data;
 	struct mmc_command	*stop;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 4f705eb..ba34fc5 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -173,6 +173,7 @@  struct mmc_host {
 						/* DDR mode at 1.2V */
 #define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
 #define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* CMD14/CMD19 bus width ok */
+#define MMC_CAP_CMD23		(1 << 15)	/* CMD23 supported */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -330,5 +331,10 @@  static inline int mmc_card_wake_sdio_irq(struct mmc_host *host)
 {
 	return host->pm_flags & MMC_PM_WAKE_SDIO_IRQ;
 }
+
+static inline int mmc_host_cmd23(struct mmc_host *host)
+{
+	return host->caps & MMC_CAP_CMD23;
+}
 #endif
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 373b2bf..ea74168 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -82,6 +82,12 @@ 
 #define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
 #define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
 
+static inline bool mmc_op_multi(u32 opcode)
+{
+	return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
+		opcode == MMC_READ_MULTIPLE_BLOCK;
+}
+
 /*
  * MMC_SWITCH argument format:
  *