From patchwork Tue Apr 19 16:52:51 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Olech X-Patchwork-Id: 718511 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p3JGrKN9009978 for ; Tue, 19 Apr 2011 16:53:20 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753452Ab1DSQxO (ORCPT ); Tue, 19 Apr 2011 12:53:14 -0400 Received: from moutng.kundenserver.de ([212.227.126.187]:57353 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752569Ab1DSQxA (ORCPT ); Tue, 19 Apr 2011 12:53:00 -0400 Received: from [192.168.4.242] (host217-40-115-50.in-addr.btopenworld.com [217.40.115.50]) by mrelayeu.kundenserver.de (node=mreu2) with ESMTP (Nemesis) id 0Mao5W-1QSEqy1HCc-00KPDu; Tue, 19 Apr 2011 18:52:56 +0200 Subject: [PATCH] mmc: USB SDIO/SD/MMC Host Controller (VUB300) driver Re-Re-Resubmission From: Tony Olech To: Chris Ball Cc: linux-mmc@vger.kernel.org Organization: Elan Digital Systems Limited Date: Tue, 19 Apr 2011 17:52:51 +0100 Message-ID: <1303231971.1622.33.camel@apple-mac> Mime-Version: 1.0 X-Mailer: Evolution 2.30.3 X-Provags-ID: V02:K0:ckFXbFSEwJsnAUu+eWO2xKQ1vJYvqOU6rinl/qdK5r7 zTkyB/6tLWGSTu6QZcdG4w8N4ts1FBHbIXaaNQXnY++KEuxb0H hJXeM2U2c0L5f1pM9SDXAButTNZMNeWS9XZNUNuaJNBQEtZAWt VaXYplO6nQNwWZO9Vv+8YzuYKos8kEQbJxD+vquYNxgFd0tlLg Q/dNcQwjIWs2EtKBnGsdhI39RUVzBKzvTuXVRFwpKLamdL4mVB FkLlXDPE6G7xi Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Tue, 19 Apr 2011 16:53:21 +0000 (UTC) Add a driver for Elan Digital System's VUB300 chip which is a USB connected SDIO/SDmem/MMC host controller. A VUB300 chip enables a USB 2.0 or USB 1.1 connected host computer to use SDIO/SD/MMC cards without the need for a directly connected, for example via PCI, SDIO host controller. Signed-off-by: Anthony F Olech --- This is the forth submission attempt. There are no errors reported by scripts/checkpatch.pl This driver has been tested on a) 32bit x86 b) 64bit x86 c) dual processor d) PowerPC --- --- linux-2.6.39-rc3-vanilla/MAINTAINERS 2011-04-12 01:21:51.000000000 +0100 +++ linux-2.6.39-rc3-vub300/MAINTAINERS 2011-04-18 11:59:06.000000000 +0100 @@ -6758,6 +6758,13 @@ L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/vt8231.c +VUB300 USB to SDIO/SD/MMC bridge chip +M: Tony Olech +L: linux-mmc@vger.kernel.org +L: linux-usb@vger.kernel.org +S: Supported +F: drivers/mmc/host/vub300.c + W1 DALLAS'S 1-WIRE BUS M: Evgeniy Polyakov S: Maintained --- linux-2.6.39-rc3-vanilla/drivers/mmc/host/Makefile 2011-04-12 01:21:51.000000000 +0100 +++ linux-2.6.39-rc3-vub300/drivers/mmc/host/Makefile 2011-04-18 12:51:25.000000000 +0100 @@ -41,6 +41,7 @@ obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_DW) += dw_mmc.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o +obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o --- linux-2.6.39-rc3-vanilla/drivers/mmc/host/Kconfig 2011-04-12 01:21:51.000000000 +0100 +++ linux-2.6.39-rc3-vub300/drivers/mmc/host/Kconfig 2011-04-18 12:54:17.000000000 +0100 @@ -535,6 +535,37 @@ config MMC_JZ4740 If you have a board based on such a SoC and with a SD/MMC slot, say Y or M here. +config MMC_VUB300 + tristate "VUB300 USB to SDIO/SD/MMC Host Controller support" + depends on USB + help + This selects support for Elan Digital Systems' VUB300 chip. + + The VUB300 is a USB-SDIO Host Controller Interface chip + that enables the host computer to use SDIO/SD/MMC cards + via a USB 2.0 or USB 1.1 host. + + The VUB300 chip will be found in both physically separate + USB to SDIO/SD/MMC adapters and embedded on some motherboards. + + The VUB300 chip supports SD and MMC memory cards in addition + to single and multifunction SDIO cards. + + Some SDIO cards will need a firmware file to be loaded and + sent to VUB300 chip in order to achieve better data throughput. + Download these "Offload Pseudocode" from Elan Digital Systems' + web-site http://www.elandigitalsystems.com/support/downloads.php + and put them in /lib/firmware. Note that without these additional + firmware files the VUB300 chip will still function, but not at + the best obtainable data rate. + + To compile this mmc host controller driver as a module, + choose M here: the module will be called vub300. + + If you have a computer with an embedded VUB300 chip + or if you intend connecting a USB adapter based on a + VUB300 chip say Y or M here. + config MMC_USHC tristate "USB SD Host Controller (USHC) support" depends on USB --- /dev/null 2011-04-19 13:52:38.464000002 +0100 +++ linux-2.6.39-rc3-vub300/drivers/mmc/host/vub300.c 2011-04-19 15:12:48.000000000 +0100 @@ -0,0 +1,2529 @@ +/* + * Remote VUB300 SDIO/SDmem Host Controller Driver + * + * Copyright (C) 2010 Elan Digital Systems Limited + * + * based on USB Skeleton driver - 2.2 + * + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 + * + * VUB300: is a USB 2.0 client device with a single SDIO/SDmem/MMC slot + * Any SDIO/SDmem/MMC device plugged into the VUB300 will appear, + * by virtue of this driver, to have been plugged into a local + * SDIO host controller, similar to, say, a PCI Ricoh controller + * This is because this kernel device driver is both a USB 2.0 + * client device driver AND an MMC host controller driver. Thus + * if there is an existing driver for the inserted SDIO/SDmem/MMC + * device then that driver will be used by the kernel to manage + * the device in exactly the same fashion as if it had been + * directly plugged into, say, a local pci bus Ricoh controller + * + * RANT: this driver was written using a display 128x48 - converting it + * to a line width of 80 makes it very difficult to support. In + * particular functions have been broken down into sub functions + * and the original meaningful names have been shortened into + * cryptic ones. + * The problem is that executing a fragment of code subject to + * two conditions means an indentation of 24, thus leaving only + * 56 characters for a C statement. And that is quite ridiculous! + * + * Data types: data passed to/from the VUB300 is fixed to a number of + * bits and driver data fields reflect that limit by using + * u8, u16, u32 + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct host_controller_info { + u8 info_size; + u16 firmware_version; + u8 number_of_ports; +} __packed; + +#define FIRMWARE_BLOCK_BOUNDARY 1024 +struct sd_command_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; /* Bit7 - Rd/Wr */ + u8 command_index; + u8 transfer_size[4]; /* ReadSize + ReadSize */ + u8 response_type; + u8 arguments[4]; + u8 block_count[2]; + u8 block_size[2]; + u8 block_boundary[2]; + u8 reserved[44]; /* to pad out to 64 bytes */ +} __packed; + +struct sd_irqpoll_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; /* Bit7 - Rd/Wr */ + u8 padding[16]; /* don't ask why !! */ + u8 poll_timeout_msb; + u8 poll_timeout_lsb; + u8 reserved[42]; /* to pad out to 64 bytes */ +} __packed; + +struct sd_common_header { + u8 header_size; + u8 header_type; + u8 port_number; +} __packed; + +struct sd_response_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; + u8 command_index; + u8 command_response[0]; +} __packed; + +struct sd_status_header { + u8 header_size; + u8 header_type; + u8 port_number; + u16 port_flags; + u32 sdio_clock; + u16 host_header_size; + u16 func_header_size; + u16 ctrl_header_size; +} __packed; + +struct sd_error_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 error_code; +} __packed; + +struct sd_interrupt_header { + u8 header_size; + u8 header_type; + u8 port_number; +} __packed; + +struct offload_registers_access { + u8 command_byte[4]; + u8 Respond_Byte[4]; +} __packed; + +#define INTERRUPT_REGISTER_ACCESSES 15 +struct sd_offloaded_interrupt { + u8 header_size; + u8 header_type; + u8 port_number; + struct offload_registers_access reg[INTERRUPT_REGISTER_ACCESSES]; +} __packed; + +struct sd_register_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; + u8 command_index; + u8 command_response[6]; +} __packed; + +#define PIGGYBACK_REGISTER_ACCESSES 14 +struct sd_offloaded_piggyback { + struct sd_register_header sdio; + struct offload_registers_access reg[PIGGYBACK_REGISTER_ACCESSES]; +} __packed; + +union sd_response { + struct sd_common_header common; + struct sd_status_header status; + struct sd_error_header error; + struct sd_interrupt_header interrupt; + struct sd_response_header response; + struct sd_offloaded_interrupt irq; + struct sd_offloaded_piggyback pig; +} __packed; + +union sd_command { + struct sd_command_header head; + struct sd_irqpoll_header poll; +} __packed; + +enum SD_RESPONSE_TYPE { + SDRT_UNSPECIFIED = 0, + SDRT_NONE, + SDRT_1, + SDRT_1B, + SDRT_2, + SDRT_3, + SDRT_4, + SDRT_5, + SDRT_5B, + SDRT_6, + SDRT_7, +} __packed; + +#define RESPONSE_INTERRUPT 0x01 +#define RESPONSE_ERROR 0x02 +#define RESPONSE_STATUS 0x03 +#define RESPONSE_IRQ_DISABLED 0x05 +#define RESPONSE_IRQ_ENABLED 0x06 +#define RESPONSE_PIGGYBACKED 0x07 +#define RESPONSE_NO_INTERRUPT 0x08 +#define RESPONSE_PIG_DISABLED 0x09 +#define RESPONSE_PIG_ENABLED 0x0A +#define SD_ERROR_1BIT_TIMEOUT 0x01 +#define SD_ERROR_4BIT_TIMEOUT 0x02 +#define SD_ERROR_1BIT_CRC_WRONG 0x03 +#define SD_ERROR_4BIT_CRC_WRONG 0x04 +#define SD_ERROR_1BIT_CRC_ERROR 0x05 +#define SD_ERROR_4BIT_CRC_ERROR 0x06 +#define SD_ERROR_NO_CMD_ENDBIT 0x07 +#define SD_ERROR_NO_1BIT_DATEND 0x08 +#define SD_ERROR_NO_4BIT_DATEND 0x09 +#define SD_ERROR_1BIT_UNEXPECTED_TIMEOUT 0x0A +#define SD_ERROR_4BIT_UNEXPECTED_TIMEOUT 0x0B +#define SD_ERROR_ILLEGAL_COMMAND 0x0C +#define SD_ERROR_NO_DEVICE 0x0D +#define SD_ERROR_TRANSFER_LENGTH 0x0E +#define SD_ERROR_1BIT_DATA_TIMEOUT 0x0F +#define SD_ERROR_4BIT_DATA_TIMEOUT 0x10 +#define SD_ERROR_ILLEGAL_STATE 0x11 +#define SD_ERROR_UNKNOWN_ERROR 0x12 +#define SD_ERROR_RESERVED_ERROR 0x13 +#define SD_ERROR_INVALID_FUNCTION 0x14 +#define SD_ERROR_OUT_OF_RANGE 0x15 +#define SD_ERROR_STAT_CMD 0x16 +#define SD_ERROR_STAT_DATA 0x17 +#define SD_ERROR_STAT_CMD_TIMEOUT 0x18 +#define SD_ERROR_SDCRDY_STUCK 0x19 +#define SD_ERROR_UNHANDLED 0x1A +#define SD_ERROR_OVERRUN 0x1B +#define SD_ERROR_PIO_TIMEOUT 0x1C +#define INITIALIZE_VALUE_TO_ZERO 0 + +MODULE_AUTHOR("Tony Olech "); +MODULE_DESCRIPTION("VUB300 USB to SD/MMC/SDIO adapter driver"); +MODULE_LICENSE("GPL"); + +#define FUN(c) (0x000007 & (c->arg>>28)) +#define REG(c) (0x01FFFF & (c->arg>>9)) + +static int limit_speed_to_24_MHz = INITIALIZE_VALUE_TO_ZERO; +module_param(limit_speed_to_24_MHz, bool, 0644); +MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz"); +static int pad_input_to_usb_pkt = INITIALIZE_VALUE_TO_ZERO; +module_param(pad_input_to_usb_pkt, bool, 0644); +MODULE_PARM_DESC(pad_input_to_usb_pkt, + "Pad USB data input transfers to whole USB Packet"); +static int disable_offload_processing = INITIALIZE_VALUE_TO_ZERO; +module_param(disable_offload_processing, bool, 0644); +MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing"); +static int force_1_bit_data_xfers = INITIALIZE_VALUE_TO_ZERO; +module_param(force_1_bit_data_xfers, bool, 0644); +MODULE_PARM_DESC(force_1_bit_data_xfers, + "Force SDIO Data Transfers to 1-bit Mode"); +static int force_polling_for_irqs = INITIALIZE_VALUE_TO_ZERO; +module_param(force_polling_for_irqs, bool, 0644); +MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts"); +static int firmware_irqpoll_timeout = 1024; +module_param(firmware_irqpoll_timeout, int, 0644); +MODULE_PARM_DESC(firmware_irqpoll_timeout, "VUB300 firmware irqpoll timeout"); +static int force_max_req_size = 128; +module_param(force_max_req_size, int, 0644); +MODULE_PARM_DESC(force_max_req_size, "set max request size in kBytes"); +#ifdef SMSC_DEVELOPMENT_BOARD +static int firmware_rom_wait_states = 0x04; +#else +static int firmware_rom_wait_states = 0x1C; +#endif +module_param(firmware_rom_wait_states, bool, 0644); +MODULE_PARM_DESC(firmware_rom_wait_states, + "ROM wait states byte=RRRIIEEE (Reserved Internal External)"); + +#define ELAN_VENDOR_ID 0x2201 +#define VUB300_VENDOR_ID 0x0424 +#define VUB300_PRODUCT_ID 0x012C +static struct usb_device_id vub300_table[] = { + {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)}, + {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, vub300_table); + +static struct workqueue_struct *cmndworkqueue; +static struct workqueue_struct *pollworkqueue; +static struct workqueue_struct *deadworkqueue; + +static inline int interface_to_InterfaceNumber(struct usb_interface *interface) +{ + if (!interface) + return -1; + if (!interface->cur_altsetting) + return -1; + return interface->cur_altsetting->desc.bInterfaceNumber; +} + +struct sdio_register { + unsigned func_num:3; + unsigned sdio_reg:17; + unsigned activate:1; + unsigned prepared:1; + unsigned regvalue:8; + unsigned response:8; + unsigned sparebit:26; +}; + +struct vub300_mmc_host { + struct usb_device *udev; + struct usb_interface *interface; + struct kref kref; + struct mutex cmd_mutex; + struct mutex irq_mutex; + char vub_name[3 + (9 * 8) + 4 + 1]; /* max of 7 sdio fn's */ + u8 cmnd_out_ep; /* EndPoint for commands */ + u8 cmnd_res_ep; /* EndPoint for responses */ + u8 data_out_ep; /* EndPoint for out data */ + u8 data_inp_ep; /* EndPoint for inp data */ + unsigned card_powered:1; + unsigned card_present:1; + unsigned read_only:1; + unsigned large_usb_packets:1; + unsigned app_spec:1; /* ApplicationSpecific */ + unsigned irq_enabled:1; /* by the MMC CORE */ + unsigned irq_disabled:1; /* in the firmware */ + unsigned bus_width:4; + u8 total_offload_count; + u8 dynamic_register_count; + u8 resp_len; + u32 datasize; + int errors; + int usb_transport_fail; + int usb_timed_out; + int irqs_queued; + struct sdio_register sdio_register[16]; + struct offload_interrupt_function_register { +#define MAXREGBITS 4 +#define MAXREGS (1<mmc; + usb_free_urb(vub300->command_out_urb); + vub300->command_out_urb = NULL; + usb_free_urb(vub300->command_res_urb); + vub300->command_res_urb = NULL; + usb_put_dev(vub300->udev); + mmc_free_host(mmc); + /* + * and hence also frees vub300 + * which is contained at the end of struct mmc + */ +} + +static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300) +{ + kref_get(&vub300->kref); + if (queue_work(cmndworkqueue, &vub300->cmndwork)) { + /* + * then the cmndworkqueue was not previously + * running and the above get ref is obvious + * required and will be put when the thread + * terminates by a specific call + */ + } else { + /* + * the cmndworkqueue was already running from + * a previous invocation and thus to keep the + * kref counts correct we must undo the get + */ + kref_put(&vub300->kref, vub300_delete); + } +} + +static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay) +{ + kref_get(&vub300->kref); + if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) { + /* + * then the pollworkqueue was not previously + * running and the above get ref is obvious + * required and will be put when the thread + * terminates by a specific call + */ + } else { + /* + * the pollworkqueue was already running from + * a previous invocation and thus to keep the + * kref counts correct we must undo the get + */ + kref_put(&vub300->kref, vub300_delete); + } +} + +static void vub300_queue_dead_work(struct vub300_mmc_host *vub300) +{ + kref_get(&vub300->kref); + if (queue_work(deadworkqueue, &vub300->deadwork)) { + /* + * then the deadworkqueue was not previously + * running and the above get ref is obvious + * required and will be put when the thread + * terminates by a specific call + */ + } else { + /* + * the deadworkqueue was already running from + * a previous invocation and thus to keep the + * kref counts correct we must undo the get + */ + kref_put(&vub300->kref, vub300_delete); + } +} + +static void irqpoll_res_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) + vub300->usb_transport_fail = urb->status; + complete(&vub300->irqpoll_complete); +} + +static void irqpoll_out_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) { + vub300->usb_transport_fail = urb->status; + complete(&vub300->irqpoll_complete); + return; + } else { + int ret; + unsigned int pipe = + usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep); + usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe, + &vub300->resp, sizeof(vub300->resp), + irqpoll_res_completed, vub300); + vub300->command_res_urb->actual_length = 0; + ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC); + if (ret) { + vub300->usb_transport_fail = ret; + complete(&vub300->irqpoll_complete); + } + return; + } +} + +static void send_irqpoll(struct vub300_mmc_host *vub300) +{ + /* + * cmd_mutex is held by vub300_pollwork_thread + */ + int retval; + int timeout = 0xFFFF & (0x0001FFFF - firmware_irqpoll_timeout); + vub300->cmnd.poll.header_size = 22; + vub300->cmnd.poll.header_type = 1; + vub300->cmnd.poll.port_number = 0; + vub300->cmnd.poll.command_type = 2; + vub300->cmnd.poll.poll_timeout_lsb = 0xFF & (unsigned)timeout; + vub300->cmnd.poll.poll_timeout_msb = 0xFF & (unsigned)(timeout >> 8); + usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev, + usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep) + , &vub300->cmnd, sizeof(vub300->cmnd) + , irqpoll_out_completed, vub300); + retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL); + if (0 > retval) { + vub300->usb_transport_fail = retval; + vub300_queue_poll_work(vub300, 1); + complete(&vub300->irqpoll_complete); + return; + } else { + return; + } +} + +static void new_system_port_status(struct vub300_mmc_host *vub300) +{ + int old_card_present = vub300->card_present; + int new_card_present = + (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; + vub300->read_only = + (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; + if (new_card_present && !old_card_present) { + dev_info(&vub300->udev->dev, "card just inserted\n"); + vub300->card_present = 1; + vub300->bus_width = 0; + if (disable_offload_processing) + strncpy(vub300->vub_name, "EMPTY Processing Disabled", + sizeof(vub300->vub_name)); + else + vub300->vub_name[0] = 0; + mmc_detect_change(vub300->mmc, 1); + return; + } else if (!new_card_present && old_card_present) { + dev_info(&vub300->udev->dev, "card just ejected\n"); + vub300->card_present = 0; + mmc_detect_change(vub300->mmc, 0); + return; + } else { + return; + } +} + +static void __add_offloaded_reg_to_fifo(struct vub300_mmc_host *vub300, + struct offload_registers_access + *register_access, u8 func) +{ + u8 r = vub300->fn[func].offload_point + + vub300->fn[func].offload_count; + memcpy(&vub300->fn[func].reg[MAXREGMASK & r] + , register_access, sizeof(struct offload_registers_access)); + vub300->fn[func].offload_count += 1; + vub300->total_offload_count += 1; +} + +static void add_offloaded_reg(struct vub300_mmc_host *vub300, + struct offload_registers_access *register_access) +{ + u32 Register = ((0x03 & register_access->command_byte[0]) << 15) + | ((0xFF & register_access->command_byte[1]) << 7) + | ((0xFE & register_access->command_byte[2]) >> 1); + u8 func = ((0x70 & register_access->command_byte[0]) >> 4); + u8 regs = vub300->dynamic_register_count; + u8 i = 0; + while (0 < regs-- && 1 == vub300->sdio_register[i].activate) { + if ((vub300->sdio_register[i].func_num == func) + && (vub300->sdio_register[i].sdio_reg == Register) + ) { + if (0 == vub300->sdio_register[i].prepared) + vub300->sdio_register[i].prepared = 1; + vub300->sdio_register[i].response = + register_access->Respond_Byte[2]; + vub300->sdio_register[i].regvalue = + register_access->Respond_Byte[3]; + return; + } else { + i += 1; + continue; + } + }; + __add_offloaded_reg_to_fifo(vub300, register_access, func); +} + +static void check_vub300_port_status(struct vub300_mmc_host *vub300) +{ + /* + * cmd_mutex is held by vub300_pollwork_thread, + * vub300_deadwork_thread or vub300_cmndwork_thread + */ + int retval; + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + GET_SYSTEM_PORT_STATUS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, &vub300->system_port_status, + sizeof(vub300->system_port_status), HZ); + if (sizeof(vub300->system_port_status) == retval) + new_system_port_status(vub300); +} + +static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300) +{ + /* + * cmd_mutex is held by vub300_pollwork_thread + */ + if (0 == vub300->command_res_urb->actual_length) { + /* no need to do anything */ + } else if (RESPONSE_INTERRUPT == vub300->resp.common.header_type) { + mutex_lock(&vub300->irq_mutex); + if (vub300->irq_enabled) + mmc_signal_sdio_irq(vub300->mmc); + else + vub300->irqs_queued += 1; + vub300->irq_disabled = 1; + mutex_unlock(&vub300->irq_mutex); + } else if (RESPONSE_ERROR == vub300->resp.common.header_type) { + if (SD_ERROR_NO_DEVICE == vub300->resp.error.error_code) + check_vub300_port_status(vub300); + mutex_unlock(&vub300->cmd_mutex); + } else if (RESPONSE_STATUS == vub300->resp.common.header_type) { + vub300->system_port_status = vub300->resp.status; + new_system_port_status(vub300); + if (!vub300->card_present) + vub300_queue_poll_work(vub300, HZ / 5); + } else if (RESPONSE_IRQ_DISABLED == vub300->resp.common.header_type) { + int offloaded_data_length = vub300->resp.common.header_size - 3; + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irq_enabled) + mmc_signal_sdio_irq(vub300->mmc); + else + vub300->irqs_queued += 1; + vub300->irq_disabled = 1; + mutex_unlock(&vub300->irq_mutex); + } else if (RESPONSE_IRQ_ENABLED == vub300->resp.common.header_type) { + int offloaded_data_length = vub300->resp.common.header_size - 3; + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irq_enabled) + mmc_signal_sdio_irq(vub300->mmc); + else if (vub300->irqs_queued) + vub300->irqs_queued += 1; + else + vub300->irqs_queued += 1; + vub300->irq_disabled = 0; + mutex_unlock(&vub300->irq_mutex); + } else if (RESPONSE_NO_INTERRUPT == vub300->resp.common.header_type) { + vub300_queue_poll_work(vub300, 1); + } else { + } +} + +static void __do_poll(struct vub300_mmc_host *vub300) +{ + /* + * cmd_mutex is held by vub300_pollwork_thread + */ + long commretval; + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + init_completion(&vub300->irqpoll_complete); + send_irqpoll(vub300); + commretval = wait_for_completion_timeout(&vub300->irqpoll_complete, + msecs_to_jiffies(500)); + if (vub300->usb_transport_fail) { + /* no need to do anything */ + } else if (0 == commretval) { + vub300->usb_timed_out = 1; + usb_kill_urb(vub300->command_out_urb); + usb_kill_urb(vub300->command_res_urb); + } else if (0 > commretval) { + vub300_queue_poll_work(vub300, 1); + } else { /*(0 < commretval) */ + + __vub300_irqpoll_response(vub300); + } +} + +/* this thread runs only when the driver + * is trying to poll the device for an IRQ + */ +static void vub300_pollwork_thread(struct work_struct *work) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = container_of(work, + struct vub300_mmc_host, pollwork.work); + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + return; + } + mutex_lock(&vub300->cmd_mutex); + if (vub300->cmd) { + vub300_queue_poll_work(vub300, 1); + } else if (!vub300->card_present) { + /* no need to do anything */ + } else { /* vub300->card_present */ + mutex_lock(&vub300->irq_mutex); + if (!vub300->irq_enabled) { + mutex_unlock(&vub300->irq_mutex); + } else if (vub300->irqs_queued) { + vub300->irqs_queued -= 1; + mmc_signal_sdio_irq(vub300->mmc); + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + mutex_unlock(&vub300->irq_mutex); + } else { /* NOT vub300->irqs_queued */ + mutex_unlock(&vub300->irq_mutex); + __do_poll(vub300); + } + } + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); +} + +static void vub300_deadwork_thread(struct work_struct *work) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = + container_of(work, struct vub300_mmc_host, deadwork); + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + return; + } + mutex_lock(&vub300->cmd_mutex); + if (vub300->cmd) { + /* + * a command got in as the inactivity + * timer expired - so we just let the + * processing of the command show if + * the device is dead + */ + } else if (vub300->card_present) { + check_vub300_port_status(vub300); + } else if (vub300->mmc && vub300->mmc->card + && mmc_card_present(vub300->mmc->card)) { + /* + * the MMC core must not have responded + * to the previous indication - lets + * hope that it eventually does so we + * will just ignore this for now + */ + } else { + check_vub300_port_status(vub300); + } + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); +} + +static void vub300_inactivity_timer_expired(unsigned long data) +{ /* softirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data; + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + } else if (vub300->cmd) { + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + } else { + vub300_queue_dead_work(vub300); + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + } +} + +static int vub300_response_error(u8 error_code) +{ + switch (error_code) { + case SD_ERROR_PIO_TIMEOUT: + case SD_ERROR_1BIT_TIMEOUT: + case SD_ERROR_4BIT_TIMEOUT: + return -ETIMEDOUT; + case SD_ERROR_STAT_DATA: + case SD_ERROR_OVERRUN: + case SD_ERROR_STAT_CMD: + case SD_ERROR_STAT_CMD_TIMEOUT: + case SD_ERROR_SDCRDY_STUCK: + case SD_ERROR_UNHANDLED: + case SD_ERROR_1BIT_CRC_WRONG: + case SD_ERROR_4BIT_CRC_WRONG: + case SD_ERROR_1BIT_CRC_ERROR: + case SD_ERROR_4BIT_CRC_ERROR: + case SD_ERROR_NO_CMD_ENDBIT: + case SD_ERROR_NO_1BIT_DATEND: + case SD_ERROR_NO_4BIT_DATEND: + case SD_ERROR_1BIT_DATA_TIMEOUT: + case SD_ERROR_4BIT_DATA_TIMEOUT: + case SD_ERROR_1BIT_UNEXPECTED_TIMEOUT: + case SD_ERROR_4BIT_UNEXPECTED_TIMEOUT: + return -EILSEQ; + case 33: + return -EILSEQ; + case SD_ERROR_ILLEGAL_COMMAND: + return -EINVAL; + case SD_ERROR_NO_DEVICE: + return -ENOMEDIUM; + default: + return -ENODEV; + } +} + +static void command_res_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) { + /* + * we have to let the initiator handle the error + */ + } else if (0 == vub300->command_res_urb->actual_length) { + /* + * we have seen this happen once or twice and + * we suspect a buggy USB host controller + */ + } else if (!vub300->data) { + /* + * this means that the command (typically CMD52) suceeded + */ + } else if (0x02 != vub300->resp.common.header_type) { + /* + * this is an error response from the VUB300 chip + * and we let the initiator handle it + */ + } else if (vub300->urb) { + vub300->cmd->error = + vub300_response_error(vub300->resp.error.error_code); + usb_unlink_urb(vub300->urb); + } else { + vub300->cmd->error = + vub300_response_error(vub300->resp.error.error_code); + usb_sg_cancel(&vub300->sg_request); + } + complete(&vub300->command_complete); /* got_response_in */ +} + +static void command_out_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) { + complete(&vub300->command_complete); + } else { + int ret; + unsigned int pipe = + usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep); + usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe, + &vub300->resp, sizeof(vub300->resp), + command_res_completed, vub300); + vub300->command_res_urb->actual_length = 0; + ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC); + if (0 == ret) { + /* + * the urb completion handler will call + * our completion handler + */ + } else { + /* + * and thus we only call it directly + * when it will not be called + */ + complete(&vub300->command_complete); + } + } +} + +/* + * the STUFF bits are masked out for the comparisons + */ +static void snoop_block_size_and_bus_width(struct vub300_mmc_host *vub300, + u32 cmd_arg) +{ + if (0x80022200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[1] = (cmd_arg << 8) | (0x00FF & vub300->fbs[1]); + else if (0x80022000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[1] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[1]); + else if (0x80042200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[2] = (cmd_arg << 8) | (0x00FF & vub300->fbs[2]); + else if (0x80042000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[2] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[2]); + else if (0x80062200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[3] = (cmd_arg << 8) | (0x00FF & vub300->fbs[3]); + else if (0x80062000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[3] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[3]); + else if (0x80082200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[4] = (cmd_arg << 8) | (0x00FF & vub300->fbs[4]); + else if (0x80082000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[4] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[4]); + else if (0x800A2200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[5] = (cmd_arg << 8) | (0x00FF & vub300->fbs[5]); + else if (0x800A2000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[5] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[5]); + else if (0x800C2200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[6] = (cmd_arg << 8) | (0x00FF & vub300->fbs[6]); + else if (0x800C2000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[6] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[6]); + else if (0x800E2200 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[7] = (cmd_arg << 8) | (0x00FF & vub300->fbs[7]); + else if (0x800E2000 == (0xFBFFFE00 & cmd_arg)) + vub300->fbs[7] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[7]); + else if (0x80000E00 == (0xFBFFFE03 & cmd_arg)) + vub300->bus_width = 1; + else if (0x80000E02 == (0xFBFFFE03 & cmd_arg)) + vub300->bus_width = 4; +} + +static void send_command(struct vub300_mmc_host *vub300) +{ + /* + * cmd_mutex is held by vub300_cmndwork_thread + */ + struct mmc_command *cmd = vub300->cmd; + struct mmc_data *data = vub300->data; + int retval; + u8 response_type; + if (vub300->app_spec) { + if (6 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + if (0x00000000 == (0x00000003 & cmd->arg)) + vub300->bus_width = 1; + else if (0x00000002 == (0x00000003 & cmd->arg)) + vub300->bus_width = 4; + else + dev_err(&vub300->udev->dev, + "unexpected ACMD6 bus_width=%d\n", + 0x00000003 & cmd->arg); + } else if (13 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (22 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (23 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (41 == cmd->opcode) { + response_type = SDRT_3; + vub300->resp_len = 6; + } else if (42 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (51 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (55 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else { + vub300->resp_len = 0; + cmd->error = -EINVAL; + complete(&vub300->command_complete); + return; + } + vub300->app_spec = 0; + } else { + if (0 == cmd->opcode) { + response_type = SDRT_NONE; + vub300->resp_len = 0; + } else if (1 == cmd->opcode) { + response_type = SDRT_3; + vub300->resp_len = 6; + } else if (2 == cmd->opcode) { + response_type = SDRT_2; + vub300->resp_len = 17; + } else if (3 == cmd->opcode) { + response_type = SDRT_6; + vub300->resp_len = 6; + } else if (4 == cmd->opcode) { + response_type = SDRT_NONE; + vub300->resp_len = 0; + } else if (5 == cmd->opcode) { + response_type = SDRT_4; + vub300->resp_len = 6; + } else if (6 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (7 == cmd->opcode) { + response_type = SDRT_1B; + vub300->resp_len = 6; + } else if (8 == cmd->opcode) { + response_type = SDRT_7; + vub300->resp_len = 6; + } else if (9 == cmd->opcode) { + response_type = SDRT_2; + vub300->resp_len = 17; + } else if (10 == cmd->opcode) { + response_type = SDRT_2; + vub300->resp_len = 17; + } else if (12 == cmd->opcode) { + response_type = SDRT_1B; + vub300->resp_len = 6; + } else if (13 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (15 == cmd->opcode) { + response_type = SDRT_NONE; + vub300->resp_len = 0; + } else if (16 == cmd->opcode) { + int i; + for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++) + vub300->fbs[i] = 0xFFFF & cmd->arg; + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (17 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (18 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (24 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (25 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (27 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (28 == cmd->opcode) { + response_type = SDRT_1B; + vub300->resp_len = 6; + } else if (29 == cmd->opcode) { + response_type = SDRT_1B; + vub300->resp_len = 6; + } else if (30 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (32 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (33 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (38 == cmd->opcode) { + response_type = SDRT_1B; + vub300->resp_len = 6; + } else if (42 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else if (52 == cmd->opcode) { + response_type = SDRT_5; + vub300->resp_len = 6; + snoop_block_size_and_bus_width(vub300, cmd->arg); + } else if (53 == cmd->opcode) { + response_type = SDRT_5; + vub300->resp_len = 6; + } else if (55 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + vub300->app_spec = 1; + } else if (56 == cmd->opcode) { + response_type = SDRT_1; + vub300->resp_len = 6; + } else { + vub300->resp_len = 0; + cmd->error = -EINVAL; + complete(&vub300->command_complete); + return; + } + } + /* + * it is a shame that we can not use "sizeof(struct sd_command_header)" + * this is because the packet _must_ be padded to 64 bytes + */ + vub300->cmnd.head.header_size = 20; + vub300->cmnd.head.header_type = 0x00; + vub300->cmnd.head.port_number = 0; /* "0" means port 1 */ + vub300->cmnd.head.command_type = 0x00; /* standard read command */ + vub300->cmnd.head.response_type = response_type; + vub300->cmnd.head.command_index = cmd->opcode; + vub300->cmnd.head.arguments[0] = cmd->arg >> 24; + vub300->cmnd.head.arguments[1] = cmd->arg >> 16; + vub300->cmnd.head.arguments[2] = cmd->arg >> 8; + vub300->cmnd.head.arguments[3] = cmd->arg >> 0; + if (52 == cmd->opcode) { + int fn = 0x7 & (cmd->arg >> 28); + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + vub300->cmnd.head.block_size[0] = (vub300->fbs[fn] >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = (vub300->fbs[fn] >> 0) & 0xFF; + vub300->cmnd.head.command_type = 0x00; + vub300->cmnd.head.transfer_size[0] = 0; + vub300->cmnd.head.transfer_size[1] = 0; + vub300->cmnd.head.transfer_size[2] = 0; + vub300->cmnd.head.transfer_size[3] = 0; + } else if (!data) { + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + vub300->cmnd.head.block_size[0] = (vub300->fbs[0] >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = (vub300->fbs[0] >> 0) & 0xFF; + vub300->cmnd.head.command_type = 0x00; + vub300->cmnd.head.transfer_size[0] = 0; + vub300->cmnd.head.transfer_size[1] = 0; + vub300->cmnd.head.transfer_size[2] = 0; + vub300->cmnd.head.transfer_size[3] = 0; + } else if (53 == cmd->opcode) { + int fn = 0x7 & (cmd->arg >> 28); + if (0x08 & vub300->cmnd.head.arguments[0]) { /* BLOCK MODE */ + vub300->cmnd.head.block_count[0] = + (data->blocks >> 8) & 0xFF; + vub300->cmnd.head.block_count[1] = + (data->blocks >> 0) & 0xFF; + vub300->cmnd.head.block_size[0] = + (data->blksz >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = + (data->blksz >> 0) & 0xFF; + } else { /* BYTE MODE */ + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + vub300->cmnd.head.block_size[0] = + (vub300->datasize >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = + (vub300->datasize >> 0) & 0xFF; + } + vub300->cmnd.head.command_type = + (MMC_DATA_READ & data->flags) ? 0x00 : 0x80; + vub300->cmnd.head.transfer_size[0] = + (vub300->datasize >> 24) & 0xFF; + vub300->cmnd.head.transfer_size[1] = + (vub300->datasize >> 16) & 0xFF; + vub300->cmnd.head.transfer_size[2] = + (vub300->datasize >> 8) & 0xFF; + vub300->cmnd.head.transfer_size[3] = + (vub300->datasize >> 0) & 0xFF; + if (vub300->datasize < vub300->fbs[fn]) { + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + } + } else { + vub300->cmnd.head.block_count[0] = (data->blocks >> 8) & 0xFF; + vub300->cmnd.head.block_count[1] = (data->blocks >> 0) & 0xFF; + vub300->cmnd.head.block_size[0] = (data->blksz >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = (data->blksz >> 0) & 0xFF; + vub300->cmnd.head.command_type = + (MMC_DATA_READ & data->flags) ? 0x00 : 0x80; + vub300->cmnd.head.transfer_size[0] = + (vub300->datasize >> 24) & 0xFF; + vub300->cmnd.head.transfer_size[1] = + (vub300->datasize >> 16) & 0xFF; + vub300->cmnd.head.transfer_size[2] = + (vub300->datasize >> 8) & 0xFF; + vub300->cmnd.head.transfer_size[3] = + (vub300->datasize >> 0) & 0xFF; + if (vub300->datasize < vub300->fbs[0]) { + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + } + } + if (vub300->cmnd.head.block_size[0] + || vub300->cmnd.head.block_size[1]) { + u16 block_size = vub300->cmnd.head.block_size[1] + | (vub300->cmnd.head.block_size[0] << 8); + u16 block_boundary = FIRMWARE_BLOCK_BOUNDARY - + (FIRMWARE_BLOCK_BOUNDARY % block_size); + vub300->cmnd.head.block_boundary[0] = + (block_boundary >> 8) & 0xFF; + vub300->cmnd.head.block_boundary[1] = + (block_boundary >> 0) & 0xFF; + } else { + vub300->cmnd.head.block_boundary[0] = 0; + vub300->cmnd.head.block_boundary[1] = 0; + } + usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev, + usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep), + &vub300->cmnd, sizeof(vub300->cmnd), + command_out_completed, vub300); + retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL); + if (0 > retval) { + cmd->error = retval; + complete(&vub300->command_complete); + return; + } else { + return; + } +} + +/* + * timer callback runs in atomic mode + * so it cannot call usb_kill_urb() + */ +static void vub300_sg_timed_out(unsigned long data) +{ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data; + vub300->usb_timed_out = 1; + usb_sg_cancel(&vub300->sg_request); + usb_unlink_urb(vub300->command_out_urb); + usb_unlink_urb(vub300->command_res_urb); +} + +static u16 roundup_to_multiple_of_64(u16 number) +{ + return 0xFFC0 & (0x3F + number); +} + +/* + * this is a separate function to solve the 80 column width restriction + */ +static void __download_offload_pseudocode(struct vub300_mmc_host *vub300, + const struct firmware *fw) +{ + u8 register_count = 0; + u16 ts = 0; + u16 interrupt_size = 0; + const u8 *data = fw->data; + int size = fw->size; + u8 c; + dev_info(&vub300->udev->dev, "using %s for SDIO offload processing\n", + vub300->vub_name); + do { + c = *data++; + } while (size-- && c); /* skip comment */ + dev_info(&vub300->udev->dev, "using offload firmware %s %s\n", fw->data, + vub300->vub_name); + if (size < 4) { + dev_err(&vub300->udev->dev, + "corrupt offload pseudocode in firmware %s\n", + vub300->vub_name); + strncpy(vub300->vub_name, "corrupt offload pseudocode", + sizeof(vub300->vub_name)); + return; + } + interrupt_size += *data++; + size -= 1; + interrupt_size <<= 8; + interrupt_size += *data++; + size -= 1; + if (interrupt_size < size) { + u16 xfer_length = roundup_to_multiple_of_64(interrupt_size); + u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL); + if (xfer_buffer) { + int retval; + memcpy(xfer_buffer, data, interrupt_size); + memset(xfer_buffer + interrupt_size, 0, + xfer_length - interrupt_size); + size -= interrupt_size; + data += interrupt_size; + retval = + usb_control_msg(vub300->udev, + usb_sndctrlpipe(vub300->udev, 0), + SET_INTERRUPT_PSEUDOCODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, 0x0000, 0x0000, + xfer_buffer, xfer_length, HZ); + kfree(xfer_buffer); + if (retval < 0) { + strncpy(vub300->vub_name, + "SDIO pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "not enough memory for xfer buffer to send" + " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data, + vub300->vub_name); + strncpy(vub300->vub_name, + "SDIO interrupt pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "corrupt interrupt pseudocode in firmware %s %s\n", + fw->data, vub300->vub_name); + strncpy(vub300->vub_name, "corrupt interrupt pseudocode", + sizeof(vub300->vub_name)); + return; + } + ts += *data++; + size -= 1; + ts <<= 8; + ts += *data++; + size -= 1; + if (ts < size) { + u16 xfer_length = roundup_to_multiple_of_64(ts); + u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL); + if (xfer_buffer) { + int retval; + memcpy(xfer_buffer, data, ts); + memset(xfer_buffer + ts, 0, + xfer_length - ts); + size -= ts; + data += ts; + retval = + usb_control_msg(vub300->udev, + usb_sndctrlpipe(vub300->udev, 0), + SET_TRANSFER_PSEUDOCODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, 0x0000, 0x0000, + xfer_buffer, xfer_length, HZ); + kfree(xfer_buffer); + if (retval < 0) { + strncpy(vub300->vub_name, + "SDIO pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "not enough memory for xfer buffer to send" + " TRANSFER_PSEUDOCODE for %s %s\n", fw->data, + vub300->vub_name); + strncpy(vub300->vub_name, + "SDIO transfer pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "corrupt transfer pseudocode in firmware %s %s\n", + fw->data, vub300->vub_name); + strncpy(vub300->vub_name, "corrupt transfer pseudocode", + sizeof(vub300->vub_name)); + return; + } + register_count += *data++; + size -= 1; + if (register_count * 4 == size) { + int I = vub300->dynamic_register_count = register_count; + int i = 0; + while (I--) { + unsigned int func_num = 0; + vub300->sdio_register[i].func_num = *data++; + size -= 1; + func_num += *data++; + size -= 1; + func_num <<= 8; + func_num += *data++; + size -= 1; + func_num <<= 8; + func_num += *data++; + size -= 1; + vub300->sdio_register[i].sdio_reg = func_num; + vub300->sdio_register[i].activate = 1; + vub300->sdio_register[i].prepared = 0; + i += 1; + } + dev_info(&vub300->udev->dev, + "initialized %d dynamic pseudocode registers\n", + vub300->dynamic_register_count); + return; + } else { + dev_err(&vub300->udev->dev, + "corrupt dynamic registers in firmware %s\n", + vub300->vub_name); + strncpy(vub300->vub_name, "corrupt dynamic registers", + sizeof(vub300->vub_name)); + return; + } +} + +/* + * if the binary containing the EMPTY PseudoCode can not be found + * vub300->vub_name is set anyway in order to prevent an automatic retry + */ +static void download_offload_pseudocode(struct vub300_mmc_host *vub300) +{ + struct mmc_card *card = vub300->mmc->card; + int sdio_funcs = card->sdio_funcs; + const struct firmware *fw = NULL; + int l = snprintf(vub300->vub_name, sizeof(vub300->vub_name), + "vub_%04X%04X", card->cis.vendor, card->cis.device); + int n = 0; + int retval; + for (n = 0; n < sdio_funcs; n++) { + struct sdio_func *sf = card->sdio_func[n]; + l += snprintf(vub300->vub_name + l, + sizeof(vub300->vub_name) - l, "_%04X%04X", + sf->vendor, sf->device); + }; + snprintf(vub300->vub_name + l, sizeof(vub300->vub_name) - l, ".bin"); + dev_info(&vub300->udev->dev, "requesting offload firmware %s\n", + vub300->vub_name); + retval = request_firmware(&fw, vub300->vub_name, &card->dev); + if (0 > retval) { + strncpy(vub300->vub_name, "vub_default.bin", + sizeof(vub300->vub_name)); + retval = request_firmware(&fw, vub300->vub_name, &card->dev); + if (0 > retval) { + strncpy(vub300->vub_name, + "no SDIO offload firmware found", + sizeof(vub300->vub_name)); + } else { + __download_offload_pseudocode(vub300, fw); + release_firmware(fw); + } + } else { + __download_offload_pseudocode(vub300, fw); + release_firmware(fw); + } +} + +static void vub300_usb_bulk_msg_completion(struct urb *urb) +{ /* urb completion handler - hardirq */ + complete((struct completion *)urb->context); +} + +static int vub300_usb_bulk_msg(struct vub300_mmc_host *vub300, + unsigned int pipe, void *data, int len, + int *actual_length, int timeout_msecs) +{ + /* + * cmd_mutex is held by vub300_cmndwork_thread + */ + struct usb_device *usb_dev = vub300->udev; + struct completion done; + int retval; + vub300->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!vub300->urb) + return -ENOMEM; + usb_fill_bulk_urb(vub300->urb, usb_dev, pipe, data, len, + vub300_usb_bulk_msg_completion, NULL); + init_completion(&done); + vub300->urb->context = &done; + vub300->urb->actual_length = 0; + retval = usb_submit_urb(vub300->urb, GFP_KERNEL); + if (unlikely(retval)) + goto out; + if (!wait_for_completion_timeout + (&done, msecs_to_jiffies(timeout_msecs))) { + retval = -ETIMEDOUT; + usb_kill_urb(vub300->urb); + } else { + retval = vub300->urb->status; + } +out: + *actual_length = vub300->urb->actual_length; + usb_free_urb(vub300->urb); + vub300->urb = NULL; + return retval; +} + +static int __command_read_data(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, struct mmc_data *data) +{ + /* + * cmd_mutex is held by vub300_cmndwork_thread + */ + int linear_length = vub300->datasize; + int padded_length = vub300->large_usb_packets ? + ((511 + linear_length) >> 9) << 9 : + ((63 + linear_length) >> 6) << 6; + if ((padded_length == linear_length) || !pad_input_to_usb_pkt) { + int result; + unsigned pipe; + pipe = usb_rcvbulkpipe(vub300->udev, vub300->data_inp_ep); + result = usb_sg_init(&vub300->sg_request, vub300->udev, + pipe, 0, data->sg, + data->sg_len, 0, GFP_KERNEL); + if (0 > result) { + usb_unlink_urb(vub300->command_out_urb); + usb_unlink_urb(vub300->command_res_urb); + cmd->error = result; + data->bytes_xfered = 0; + return 0; + } else { + vub300->sg_transfer_timer.expires = + jiffies + msecs_to_jiffies(2000 + + (linear_length / 16384)); + add_timer(&vub300->sg_transfer_timer); + usb_sg_wait(&vub300->sg_request); + del_timer(&vub300->sg_transfer_timer); + if (0 > vub300->sg_request.status) { + cmd->error = vub300->sg_request.status; + data->bytes_xfered = 0; + return 0; + } else { + data->bytes_xfered = vub300->datasize; + return linear_length; + } + } + } else { + u8 *buf = kmalloc(padded_length, GFP_KERNEL); + if (buf) { + int result; + unsigned pipe = + usb_rcvbulkpipe(vub300->udev, vub300->data_inp_ep); + int actual_length = 0; + result = + vub300_usb_bulk_msg(vub300, pipe, buf, + padded_length, &actual_length, + 2000 + (padded_length / 16384)); + if (0 > result) { + cmd->error = result; + data->bytes_xfered = 0; + kfree(buf); + return 0; + } else if (actual_length < linear_length) { + cmd->error = -EREMOTEIO; + data->bytes_xfered = 0; + kfree(buf); + return 0; + } else { + sg_copy_from_buffer(data->sg, data->sg_len, buf, + linear_length); + kfree(buf); + data->bytes_xfered = vub300->datasize; + return linear_length; + } + } else { + cmd->error = -ENOMEM; + data->bytes_xfered = 0; + return 0; + } + } +} + +static int __command_write_data(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, struct mmc_data *data) +{ + /* + * cmd_mutex is held by vub300_cmndwork_thread + */ + unsigned pipe = usb_sndbulkpipe(vub300->udev, vub300->data_out_ep); + int linear_length = vub300->datasize; + int modulo_64_length = linear_length & 0x003F; + int modulo_512_length = linear_length & 0x01FF; + if (64 > linear_length) { + int result; + int actual_length; + sg_copy_to_buffer(data->sg, data->sg_len, + vub300->padded_buffer, + sizeof(vub300->padded_buffer)); + memset(vub300->padded_buffer + linear_length, 0, + sizeof(vub300->padded_buffer) - linear_length); + result = + vub300_usb_bulk_msg(vub300, pipe, vub300->padded_buffer, + sizeof(vub300->padded_buffer), + &actual_length, + 2000 + + (sizeof(vub300->padded_buffer) / + 16384)); + if (0 > result) { + cmd->error = result; + data->bytes_xfered = 0; + } else { + data->bytes_xfered = vub300->datasize; + } + } else if ((!vub300->large_usb_packets && (0 < modulo_64_length)) + || (vub300->large_usb_packets && (64 > modulo_512_length)) + ) { /* don't you just love these work-rounds */ + int padded_length = ((63 + linear_length) >> 6) << 6; + u8 *buf = kmalloc(padded_length, GFP_KERNEL); + if (buf) { + int result; + int actual_length; + sg_copy_to_buffer(data->sg, data->sg_len, buf, + padded_length); + memset(buf + linear_length, 0, + padded_length - linear_length); + result = + vub300_usb_bulk_msg(vub300, pipe, buf, + padded_length, &actual_length, + 2000 + padded_length / 16384); + kfree(buf); + if (0 > result) { + cmd->error = result; + data->bytes_xfered = 0; + } else { + data->bytes_xfered = vub300->datasize; + } + } else { + cmd->error = -ENOMEM; + data->bytes_xfered = 0; + } + } else { /* no data padding required */ + int result; + unsigned char buf[64 * 4]; + sg_copy_to_buffer(data->sg, data->sg_len, buf, sizeof(buf)); + result = usb_sg_init(&vub300->sg_request, vub300->udev, + pipe, 0, data->sg, + data->sg_len, 0, GFP_KERNEL); + if (0 > result) { + usb_unlink_urb(vub300->command_out_urb); + usb_unlink_urb(vub300->command_res_urb); + cmd->error = result; + data->bytes_xfered = 0; + } else { + vub300->sg_transfer_timer.expires = + jiffies + msecs_to_jiffies(2000 + + linear_length / 16384); + add_timer(&vub300->sg_transfer_timer); + usb_sg_wait(&vub300->sg_request); + if (cmd->error) { + data->bytes_xfered = 0; + } else { + del_timer(&vub300->sg_transfer_timer); + if (0 > vub300->sg_request.status) { + cmd->error = vub300->sg_request.status; + data->bytes_xfered = 0; + } else { + data->bytes_xfered = vub300->datasize; + } + } + } + } + return linear_length; +} + +static void __vub300_command_response(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, + struct mmc_data *data, int data_length) +{ + /* + * cmd_mutex is held by vub300_cmndwork_thread + */ + long respretval; + int msec_timeout = 1000 + data_length / 4; + respretval = + wait_for_completion_timeout(&vub300->command_complete, + msecs_to_jiffies(msec_timeout)); + if (0 == respretval) { /* TIMED OUT */ + /* + * we don't know which of "out" and "res" if any failed + */ + int result; + vub300->usb_timed_out = 1; + usb_kill_urb(vub300->command_out_urb); + usb_kill_urb(vub300->command_res_urb); + cmd->error = -ETIMEDOUT; + result = + usb_lock_device_for_reset(vub300->udev, vub300->interface); + if (result == 0) { + result = usb_reset_device(vub300->udev); + usb_unlock_device(vub300->udev); + } + } else if (0 > respretval) { + /* + * we don't know which of "out" and "res" if any failed + */ + usb_kill_urb(vub300->command_out_urb); + usb_kill_urb(vub300->command_res_urb); + cmd->error = respretval; + } else if (cmd->error) { + /* + * the error occured sending the command + * or recieving the response + */ + } else if (vub300->command_out_urb->status) { + vub300->usb_transport_fail = vub300->command_out_urb->status; + cmd->error = -EPROTO == vub300->command_out_urb->status ? + -ESHUTDOWN : vub300->command_out_urb->status; + } else if (vub300->command_res_urb->status) { + vub300->usb_transport_fail = vub300->command_res_urb->status; + cmd->error = -EPROTO == vub300->command_res_urb->status ? + -ESHUTDOWN : vub300->command_res_urb->status; + } else if (0x00 == vub300->resp.common.header_type) { + /* + * the command completed successfully + * and there was no piggybacked data + */ + } else if (RESPONSE_ERROR == vub300->resp.common.header_type) { + cmd->error = + vub300_response_error(vub300->resp.error.error_code); + if (vub300->data) + usb_sg_cancel(&vub300->sg_request); + } else if (RESPONSE_PIGGYBACKED == vub300->resp.common.header_type) { + int offloaded_data_length = + vub300->resp.common.header_size - + sizeof(struct sd_register_header); + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); + ri += 1; + } + vub300->resp.common.header_size = + sizeof(struct sd_register_header); + vub300->resp.common.header_type = 0x00; + cmd->error = 0; + } else if (RESPONSE_PIG_DISABLED == vub300->resp.common.header_type) { + int offloaded_data_length = + vub300->resp.common.header_size - + sizeof(struct sd_register_header); + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irqs_queued) { + vub300->irqs_queued += 1; + } else if (vub300->irq_enabled) { + vub300->irqs_queued += 1; + vub300_queue_poll_work(vub300, 0); + } else { + vub300->irqs_queued += 1; + } + vub300->irq_disabled = 1; + mutex_unlock(&vub300->irq_mutex); + vub300->resp.common.header_size = + sizeof(struct sd_register_header); + vub300->resp.common.header_type = 0x00; + cmd->error = 0; + } else if (RESPONSE_PIG_ENABLED == vub300->resp.common.header_type) { + int offloaded_data_length = + vub300->resp.common.header_size - + sizeof(struct sd_register_header); + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irqs_queued) { + vub300->irqs_queued += 1; + } else if (vub300->irq_enabled) { + vub300->irqs_queued += 1; + vub300_queue_poll_work(vub300, 0); + } else { + vub300->irqs_queued += 1; + } + vub300->irq_disabled = 0; + mutex_unlock(&vub300->irq_mutex); + vub300->resp.common.header_size = + sizeof(struct sd_register_header); + vub300->resp.common.header_type = 0x00; + cmd->error = 0; + } else { + cmd->error = -EINVAL; + } +} + +static void construct_request_response(struct vub300_mmc_host *vub300, + struct mmc_command *cmd) +{ + int resp_len = vub300->resp_len; + int less_cmd = (17 == resp_len) ? resp_len : resp_len - 1; + int bytes = 3 & less_cmd; + int words = less_cmd >> 2; + u8 *r = vub300->resp.response.command_response; + if (3 == bytes) { + cmd->resp[words] = (r[1 + (words << 2)] << 24) + | (r[2 + (words << 2)] << 16) + | (r[3 + (words << 2)] << 8); + } else if (2 == bytes) { + cmd->resp[words] = (r[1 + (words << 2)] << 24) + | (r[2 + (words << 2)] << 16); + } else if (1 == bytes) { + cmd->resp[words] = (r[1 + (words << 2)] << 24); + } + while (words-- > 0) { + cmd->resp[words] = (r[1 + (words << 2)] << 24) + | (r[2 + (words << 2)] << 16) + | (r[3 + (words << 2)] << 8) + | (r[4 + (words << 2)] << 0); + } + if ((53 == cmd->opcode) && (0x000000FF & cmd->resp[0])) + cmd->resp[0] &= 0xFFFFFF00; +} + +/* + * this thread runs only when there + * is an upper level command req outstanding + */ +static void vub300_cmndwork_thread(struct work_struct *work) +{ + struct vub300_mmc_host *vub300 = + container_of(work, struct vub300_mmc_host, cmndwork); + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + return; + } else { + struct mmc_request *req = vub300->req; + struct mmc_command *cmd = vub300->cmd; + struct mmc_data *data = vub300->data; + int data_length; + mutex_lock(&vub300->cmd_mutex); + init_completion(&vub300->command_complete); + if (likely(vub300->vub_name[0]) + || !vub300->mmc->card + || !mmc_card_present(vub300->mmc->card)) { + /* + * the name of the EMPTY Pseudo firmware file + * is used as a flag to indicate that the file + * has been already downloaded to the VUB300 chip + */ + } else if (0 == vub300->mmc->card->sdio_funcs) { + strncpy(vub300->vub_name, "SD memory device", + sizeof(vub300->vub_name)); + } else { + download_offload_pseudocode(vub300); + } + send_command(vub300); + if (!data) + data_length = 0; + else if (MMC_DATA_READ & data->flags) + data_length = __command_read_data(vub300, cmd, data); + else + data_length = __command_write_data(vub300, cmd, data); + __vub300_command_response(vub300, cmd, data, data_length); + vub300->req = NULL; + vub300->cmd = NULL; + vub300->data = NULL; + if (cmd->error) { + if (-ENOMEDIUM == cmd->error) + check_vub300_port_status(vub300); + mutex_unlock(&vub300->cmd_mutex); + mmc_request_done(vub300->mmc, req); + kref_put(&vub300->kref, vub300_delete); + return; + } else { + construct_request_response(vub300, cmd); + vub300->resp_len = 0; + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); + mmc_request_done(vub300->mmc, req); + return; + } + } +} + +static int examine_cyclic_buffer(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, u8 Function) +{ + /* + * cmd_mutex is held by vub300_mmc_request + */ + u8 cmd0 = 0xFF & (cmd->arg >> 24); + u8 cmd1 = 0xFF & (cmd->arg >> 16); + u8 cmd2 = 0xFF & (cmd->arg >> 8); + u8 cmd3 = 0xFF & (cmd->arg >> 0); + int first = MAXREGMASK & vub300->fn[Function].offload_point; + struct offload_registers_access *rf = &vub300->fn[Function].reg[first]; + if (cmd0 == rf->command_byte[0] + && cmd1 == rf->command_byte[1] + && cmd2 == rf->command_byte[2] + && cmd3 == rf->command_byte[3] + ) { + u8 checksum = 0x00; + cmd->resp[1] = checksum << 24; + cmd->resp[0] = (rf->Respond_Byte[0] << 24) + | (rf->Respond_Byte[1] << 16) + | (rf->Respond_Byte[2] << 8) + | (rf->Respond_Byte[3] << 0); + vub300->fn[Function].offload_point += 1; + vub300->fn[Function].offload_count -= 1; + vub300->total_offload_count -= 1; + return 1; + } else { + int delta = 1; /* because it does not match the first one */ + u8 register_count = vub300->fn[Function].offload_count - 1; + u32 register_point = vub300->fn[Function].offload_point + 1; + while (0 < register_count) { + int point = MAXREGMASK & register_point; + struct offload_registers_access *r = + &vub300->fn[Function].reg[point]; + if (cmd0 == r->command_byte[0] + && cmd1 == r->command_byte[1] + && cmd2 == r->command_byte[2] + && cmd3 == r->command_byte[3] + ) { + u8 checksum = 0x00; + cmd->resp[1] = checksum << 24; + cmd->resp[0] = (r->Respond_Byte[0] << 24) + | (r->Respond_Byte[1] << 16) + | (r->Respond_Byte[2] << 8) + | (r->Respond_Byte[3] << 0); + vub300->fn[Function].offload_point += delta; + vub300->fn[Function].offload_count -= delta; + vub300->total_offload_count -= delta; + return 1; + } else { + register_point += 1; + register_count -= 1; + delta += 1; + continue; + } + } + return 0; + } +} + +static int satisfy_request_from_offloaded_data(struct vub300_mmc_host *vub300, + struct mmc_command *cmd) +{ + /* + * cmd_mutex is held by vub300_mmc_request + */ + u8 regs = vub300->dynamic_register_count; + u8 i = 0; + u8 func = FUN(cmd); + u32 reg = REG(cmd); + while (0 < regs--) { + if ((vub300->sdio_register[i].func_num == func) + && (vub300->sdio_register[i].sdio_reg == reg) + ) { + if (!vub300->sdio_register[i].prepared) { + return 0; + } else if (0x80000000 == (0x80000000 & cmd->arg)) { + /* + * a write to a dynamic register + * nullifies our offloaded value + */ + vub300->sdio_register[i].prepared = 0; + return 0; + } else { + u8 checksum = 0x00; + u8 rsp0 = 0x00; + u8 rsp1 = 0x00; + u8 rsp2 = vub300->sdio_register[i].response; + u8 rsp3 = vub300->sdio_register[i].regvalue; + vub300->sdio_register[i].prepared = 0; + cmd->resp[1] = checksum << 24; + cmd->resp[0] = (rsp0 << 24) + | (rsp1 << 16) + | (rsp2 << 8) + | (rsp3 << 0); + return 1; + } + } else { + i += 1; + continue; + } + }; + if (0 == vub300->total_offload_count) + return 0; + else if (0 == vub300->fn[func].offload_count) + return 0; + else + return examine_cyclic_buffer(vub300, cmd, func); +} + +static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ /* NOT irq */ + struct mmc_command *cmd = req->cmd; + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + if (!vub300->interface) { + cmd->error = -ESHUTDOWN; + mmc_request_done(mmc, req); + return; + } else { + struct mmc_data *data = req->data; + if (!vub300->card_powered) { + cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, req); + return; + } + if (!vub300->card_present) { + cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, req); + return; + } + if (vub300->usb_transport_fail) { + cmd->error = vub300->usb_transport_fail; + mmc_request_done(mmc, req); + return; + } + if (!vub300->interface) { + cmd->error = -ENODEV; + mmc_request_done(mmc, req); + return; + } + kref_get(&vub300->kref); + mutex_lock(&vub300->cmd_mutex); + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + /* + * for performance we have to return immediately + * if the requested data has been offloaded + */ + if ((52 == cmd->opcode) + && satisfy_request_from_offloaded_data(vub300, cmd)) { + cmd->error = 0; + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); + mmc_request_done(mmc, req); + return; + } else { + vub300->cmd = cmd; + vub300->req = req; + vub300->data = data; + if (data) + vub300->datasize = data->blksz * data->blocks; + else + vub300->datasize = 0; + vub300_queue_cmnd_work(vub300); + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); + /* + * the kernel lock diagnostics complain + * if the cmd_mutex * is "passed on" + * to the cmndwork thread, + * so we must release it now + * and re-acquire it in the cmndwork thread + */ + } + } +} + +static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8], + struct mmc_ios *ios) +{ + int buf_array_size = 8; /* ARRAY_SIZE(buf) does not work !!! */ + int retval; + u32 kHzClock; + if (ios->clock >= 48000000) + kHzClock = 48000; + else if (ios->clock >= 24000000) + kHzClock = 24000; + else if (ios->clock >= 20000000) + kHzClock = 20000; + else if (ios->clock >= 15000000) + kHzClock = 15000; + else if (ios->clock >= 200000) + kHzClock = 200; + else + kHzClock = 0; + { + int i; + u64 c = kHzClock; + for (i = 0; i < buf_array_size; i++) { + buf[i] = c; + c >>= 8; + } + } + retval = + usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), + SET_CLOCK_SPEED, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, 0x00, buf, buf_array_size, HZ); + if (8 != retval) { + dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED" + " %dkHz failed with retval=%d\n", kHzClock, retval); + } else { + dev_info(&vub300->udev->dev, "SET_CLOCK_SPEED" + " %dkHz\n", kHzClock); + } +} + +static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + if (!vub300->interface) + return; + kref_get(&vub300->kref); + mutex_lock(&vub300->cmd_mutex); + if ((MMC_POWER_OFF == ios->power_mode) && vub300->card_powered) { + vub300->card_powered = 0; + usb_control_msg(vub300->udev, + usb_sndctrlpipe(vub300->udev, 0), + SET_SD_POWER, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, 0x0000, 0x0000, NULL, 0, + HZ); + /* + * must wait for the VUB300 u-proc to boot up + */ + msleep(600); + } else if ((MMC_POWER_UP == ios->power_mode) && !vub300->card_powered) { + usb_control_msg(vub300->udev, + usb_sndctrlpipe(vub300->udev, 0), + SET_SD_POWER, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, 0x0001, 0x0000, NULL, 0, + HZ); + msleep(600); + vub300->card_powered = 1; + } else if (MMC_POWER_ON == ios->power_mode) { + u8 *buf = kmalloc(8, GFP_KERNEL); + if (buf) { + __set_clock_speed(vub300, buf, ios); + kfree(buf); + } + } else { + /* + * this should mean no change of state + */ + } + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); +} + +static int vub300_mmc_get_ro(struct mmc_host *mmc) +{ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + return vub300->read_only; +} + +static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + if (!vub300->interface) + return; + kref_get(&vub300->kref); + if (enable) { + mutex_lock(&vub300->irq_mutex); + if (vub300->irqs_queued) { + vub300->irqs_queued -= 1; + mmc_signal_sdio_irq(vub300->mmc); + } else if (vub300->irq_disabled) { + vub300->irq_disabled = 0; + vub300->irq_enabled = 1; + vub300_queue_poll_work(vub300, 0); + } else if (vub300->irq_enabled) { + /* + * this should not happen + * so we will just ignore it + */ + } else { + vub300->irq_enabled = 1; + vub300_queue_poll_work(vub300, 0); + } + mutex_unlock(&vub300->irq_mutex); + } else { + vub300->irq_enabled = 0; + } + kref_put(&vub300->kref, vub300_delete); +} + +void vub300_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + dev_info(&vub300->udev->dev, "NO host QUIRKS for this card\n"); +} + +static struct mmc_host_ops vub300_mmc_ops = { + .request = vub300_mmc_request, + .set_ios = vub300_mmc_set_ios, + .get_ro = vub300_mmc_get_ro, + .enable_sdio_irq = vub300_enable_sdio_irq, + .init_card = vub300_init_card, +}; + +static int vub300_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = NULL; + struct usb_host_interface *iface_desc; + struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); + int i; + int retval = -ENOMEM; + struct urb *command_out_urb; + struct urb *command_res_urb; + struct mmc_host *mmc; + char manufacturer[48]; + char product[32]; + char serial_number[32]; + usb_string(udev, udev->descriptor.iManufacturer, manufacturer, + sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iProduct, product, sizeof(product)); + usb_string(udev, udev->descriptor.iSerialNumber, serial_number, + sizeof(serial_number)); + dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n", + udev->descriptor.idVendor, udev->descriptor.idProduct, + manufacturer, product, serial_number); + command_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!command_out_urb) { + retval = -ENOMEM; + dev_err(&vub300->udev->dev, + "not enough memory for the command_out_urb\n"); + goto error0; + } + command_res_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!command_res_urb) { + retval = -ENOMEM; + dev_err(&vub300->udev->dev, + "not enough memory for the command_res_urb\n"); + goto error1; + } + /* this also allocates memory for our VUB300 mmc host device */ + mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); + if (!mmc) { + retval = -ENOMEM; + dev_err(&vub300->udev->dev, + "not enough memory for the mmc_host\n"); + goto error4; + } + /* MMC core transfer sizes tunable parameters */ + mmc->caps = 0; + if (!force_1_bit_data_xfers) + mmc->caps |= MMC_CAP_4_BIT_DATA; + if (!force_polling_for_irqs) + mmc->caps |= MMC_CAP_SDIO_IRQ; + mmc->caps &= ~MMC_CAP_NEEDS_POLL; + /* + * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll + * for devices which results in spurious CMD7's being + * issued which stops some SDIO cards from working + */ + if (limit_speed_to_24_MHz) { + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + mmc->f_max = 24000000; + dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n"); + } else { + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + mmc->f_max = 48000000; + } + mmc->f_min = 200000; + mmc->max_blk_count = 511; + mmc->max_blk_size = 512; + mmc->max_segs = 128; + if (force_max_req_size) + mmc->max_req_size = force_max_req_size * 1024; + else + mmc->max_req_size = 64 * 1024; + mmc->max_seg_size = mmc->max_req_size; + mmc->ocr_avail = 0; + mmc->ocr_avail |= MMC_VDD_165_195; + mmc->ocr_avail |= MMC_VDD_20_21; + mmc->ocr_avail |= MMC_VDD_21_22; + mmc->ocr_avail |= MMC_VDD_22_23; + mmc->ocr_avail |= MMC_VDD_23_24; + mmc->ocr_avail |= MMC_VDD_24_25; + mmc->ocr_avail |= MMC_VDD_25_26; + mmc->ocr_avail |= MMC_VDD_26_27; + mmc->ocr_avail |= MMC_VDD_27_28; + mmc->ocr_avail |= MMC_VDD_28_29; + mmc->ocr_avail |= MMC_VDD_29_30; + mmc->ocr_avail |= MMC_VDD_30_31; + mmc->ocr_avail |= MMC_VDD_31_32; + mmc->ocr_avail |= MMC_VDD_32_33; + mmc->ocr_avail |= MMC_VDD_33_34; + mmc->ocr_avail |= MMC_VDD_34_35; + mmc->ocr_avail |= MMC_VDD_35_36; + mmc->ops = &vub300_mmc_ops; + vub300 = mmc_priv(mmc); + vub300->mmc = mmc; + vub300->card_powered = 0; + vub300->bus_width = 0; + vub300->cmnd.head.block_size[0] = 0x00; + vub300->cmnd.head.block_size[1] = 0x00; + vub300->app_spec = 0; + mutex_init(&vub300->cmd_mutex); + mutex_init(&vub300->irq_mutex); + vub300->command_out_urb = command_out_urb; + vub300->command_res_urb = command_res_urb; + vub300->usb_timed_out = 0; + vub300->dynamic_register_count = 0; + { + int i; + for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) { + vub300->fn[i].offload_point = 0; + vub300->fn[i].offload_count = 0; + } + } + vub300->total_offload_count = 0; + vub300->irq_enabled = 0; + vub300->irq_disabled = 0; + vub300->irqs_queued = 0; + { + int i; + for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++) + vub300->sdio_register[i++].activate = 0; + } + vub300->udev = udev; + vub300->interface = interface; + vub300->cmnd_res_ep = 0; + vub300->cmnd_out_ep = 0; + vub300->data_inp_ep = 0; + vub300->data_out_ep = 0; + { + int i; + for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++) + vub300->fbs[i] = 512; + } + /* + * set up the endpoint information + * + * use the first pair of bulk-in and bulk-out + * endpoints for Command/Response+Interrupt + * + * use the second pair of bulk-in and bulk-out + * endpoints for Data In/Out + */ + vub300->large_usb_packets = 0; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + struct usb_endpoint_descriptor *endpoint = + &iface_desc->endpoint[i].desc; + dev_info(&vub300->udev->dev, + "vub300 testing %s EndPoint(%d) %02X\n", + usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" : + usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" : + "UNKNOWN", i, endpoint->bEndpointAddress); + if (64 < endpoint->wMaxPacketSize) + vub300->large_usb_packets = 1; + if (usb_endpoint_is_bulk_in(endpoint)) { + if (!vub300->cmnd_res_ep) { + vub300->cmnd_res_ep = + endpoint->bEndpointAddress; + } else if (!vub300->data_inp_ep) { + vub300->data_inp_ep = + endpoint->bEndpointAddress; + } else { + dev_warn(&vub300->udev->dev, + "ignoring" + " unexpected bulk_in endpoint"); + } + } else if (usb_endpoint_is_bulk_out(endpoint)) { + if (!vub300->cmnd_out_ep) { + vub300->cmnd_out_ep = + endpoint->bEndpointAddress; + } else if (!vub300->data_out_ep) { + vub300->data_out_ep = + endpoint->bEndpointAddress; + } else { + dev_warn(&vub300->udev->dev, + "ignoring" + " unexpected bulk_out endpoint"); + } + } else { + dev_warn(&vub300->udev->dev, + "vub300 ignoring EndPoint(%d) %02X", i, + endpoint->bEndpointAddress); + } + } + if (vub300->cmnd_res_ep + && vub300->cmnd_out_ep + && vub300->data_inp_ep && vub300->data_out_ep) { + dev_info(&vub300->udev->dev, + "vub300 %s packets" + " using EndPoints %02X %02X %02X %02X\n", + vub300->large_usb_packets ? "LARGE" : "SMALL", + vub300->cmnd_out_ep, vub300->cmnd_res_ep, + vub300->data_out_ep, vub300->data_inp_ep); + /* + * we have the expected EndPoints + */ + } else { + dev_err(&vub300->udev->dev, + "Could not find two sets of bulk-in/out endpoint pairs\n"); + retval = -EINVAL; + goto error5; + } + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + GET_HC_INF0, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, &vub300->hc_info, + sizeof(vub300->hc_info), HZ); + if (retval < 0) + goto error5; + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + SET_ROM_WAIT_STATES, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + firmware_rom_wait_states, 0x0000, NULL, 0, HZ); + if (retval < 0) + goto error5; + dev_info(&vub300->udev->dev, + "operating_mode = %s %s %d MHz %s %d byte USB packets\n", + (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL", + (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit", + mmc->f_max / 1000000, + pad_input_to_usb_pkt ? "padding input data to" : "with", + vub300->large_usb_packets ? 512 : 64); + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + GET_SYSTEM_PORT_STATUS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, &vub300->system_port_status, + sizeof(vub300->system_port_status), HZ); + if (retval < 0) { + goto error4; + } else if (sizeof(vub300->system_port_status) == retval) { + vub300->card_present = + (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; + vub300->read_only = + (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; + } else { + goto error4; + } + usb_set_intfdata(interface, vub300); + INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread); + INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread); + INIT_WORK(&vub300->deadwork, vub300_deadwork_thread); + kref_init(&vub300->kref); + init_timer(&vub300->sg_transfer_timer); + vub300->sg_transfer_timer.data = (unsigned long)vub300; + vub300->sg_transfer_timer.function = vub300_sg_timed_out; + kref_get(&vub300->kref); + init_timer(&vub300->inactivity_timer); + vub300->inactivity_timer.data = (unsigned long)vub300; + vub300->inactivity_timer.function = vub300_inactivity_timer_expired; + vub300->inactivity_timer.expires = jiffies + HZ; + add_timer(&vub300->inactivity_timer); + if (vub300->card_present) + dev_info(&vub300->udev->dev, + "USB vub300 remote SDIO host controller[%d]" + "connected with SD/SDIO card inserted\n", + interface_to_InterfaceNumber(interface)); + else + dev_info(&vub300->udev->dev, + "USB vub300 remote SDIO host controller[%d]" + "connected with no SD/SDIO card inserted\n", + interface_to_InterfaceNumber(interface)); + mmc_add_host(mmc); + return 0; +error5: + mmc_free_host(mmc); + /* + * and hence also frees vub300 + * which is contained at the end of struct mmc + */ +error4: + usb_free_urb(command_out_urb); +error1: + usb_free_urb(command_res_urb); +error0: + return retval; +} + +static void vub300_disconnect(struct usb_interface *interface) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = usb_get_intfdata(interface); + if (!vub300 || !vub300->mmc) { + return; + } else { + struct mmc_host *mmc = vub300->mmc; + if (!vub300->mmc) { + return; + } else { + int ifnum = interface_to_InterfaceNumber(interface); + usb_set_intfdata(interface, NULL); + /* prevent more I/O from starting */ + vub300->interface = NULL; + kref_put(&vub300->kref, vub300_delete); + mmc_remove_host(mmc); + pr_info("USB vub300 remote SDIO host controller[%d]" + " now disconnected", ifnum); + return; + } + } +} + +#ifdef CONFIG_PM +static int vub300_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); + if (!vub300 || !vub300->mmc) { + return 0; + } else { + struct mmc_host *mmc = vub300->mmc; + mmc_suspend_host(mmc); + return 0; + } +} + +static int vub300_resume(struct usb_interface *intf) +{ + struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); + if (!vub300 || !vub300->mmc) { + return 0; + } else { + struct mmc_host *mmc = vub300->mmc; + mmc_resume_host(mmc); + return 0; + } +} +#else +#define vub300_suspend NULL +#define vub300_resume NULL +#endif +static int vub300_pre_reset(struct usb_interface *intf) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); + mutex_lock(&vub300->cmd_mutex); + return 0; +} + +static int vub300_post_reset(struct usb_interface *intf) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); + /* we are sure no URBs are active - no locking needed */ + vub300->errors = -EPIPE; + mutex_unlock(&vub300->cmd_mutex); + return 0; +} + +static struct usb_driver vub300_driver = { + .name = "vub300", + .probe = vub300_probe, + .disconnect = vub300_disconnect, + .suspend = vub300_suspend, + .resume = vub300_resume, + .pre_reset = vub300_pre_reset, + .post_reset = vub300_post_reset, + .id_table = vub300_table, + .supports_autosuspend = 1, +}; + +static int __init vub300_init(void) +{ /* NOT irq */ + int result; + + pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X", + firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout); + cmndworkqueue = create_singlethread_workqueue("kvub300c"); + if (!cmndworkqueue) { + pr_err("not enough memory for the REQUEST workqueue"); + result = -ENOMEM; + goto out1; + } + pollworkqueue = create_singlethread_workqueue("kvub300p"); + if (!pollworkqueue) { + pr_err("not enough memory for the IRQPOLL workqueue"); + result = -ENOMEM; + goto out2; + } + deadworkqueue = create_singlethread_workqueue("kvub300d"); + if (!deadworkqueue) { + pr_err("not enough memory for the EXPIRED workqueue"); + result = -ENOMEM; + goto out3; + } + result = usb_register(&vub300_driver); + if (result) { + pr_err("usb_register failed. Error number %d", result); + goto out4; + } + return 0; +out4: + destroy_workqueue(deadworkqueue); +out3: + destroy_workqueue(pollworkqueue); +out2: + destroy_workqueue(cmndworkqueue); +out1: + return result; +} + +static void __exit vub300_exit(void) +{ + usb_deregister(&vub300_driver); + flush_workqueue(cmndworkqueue); + flush_workqueue(pollworkqueue); + flush_workqueue(deadworkqueue); + destroy_workqueue(cmndworkqueue); + destroy_workqueue(pollworkqueue); + destroy_workqueue(deadworkqueue); +} + +module_init(vub300_init); +module_exit(vub300_exit); +MODULE_LICENSE("GPL");