From patchwork Wed Jun 8 09:41:57 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhangfei Gao X-Patchwork-Id: 861172 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.4) with ESMTP id p589gBMI009193 for ; Wed, 8 Jun 2011 09:42:12 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751773Ab1FHJmL (ORCPT ); Wed, 8 Jun 2011 05:42:11 -0400 Received: from dakia2.marvell.com ([65.219.4.35]:32919 "EHLO dakia2.marvell.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752429Ab1FHJmJ (ORCPT ); Wed, 8 Jun 2011 05:42:09 -0400 X-ASG-Debug-ID: 1307526129-082e5be20001-IEKb4K Received: from maili.marvell.com (maili.marvell.com [10.68.76.51]) by dakia2.marvell.com with ESMTP id ndeSc9ekKNOOra3e; Wed, 08 Jun 2011 02:42:09 -0700 (PDT) X-Barracuda-Envelope-From: zhangfei.gao@marvell.com Received: from localhost (unknown [10.38.164.148]) by maili.marvell.com (Postfix) with ESMTP id AFB208A002; Wed, 8 Jun 2011 02:42:08 -0700 (PDT) From: Zhangfei Gao To: Arnd Bergmann , Nicolas Pitre , Philip Rakity , Wolfram Sang , Chris Ball , "linux-mmc@vger.kernel.org" , Jun Nie , Raymond Wu , Haojian Zhuang , Qiming Wu , Eric Miao , linux-arm-kernel Cc: Zhangfei Gao , Philip Rakity X-ASG-Orig-Subj: [PATCH v4 1/5] mmc: support sdhci-pxav3.c Subject: [PATCH v4 1/5] mmc: support sdhci-pxav3.c Date: Wed, 8 Jun 2011 17:41:57 +0800 X-ASG-Orig-Subj: [PATCH v4 1/5] mmc: support sdhci-pxav3.c Message-Id: <1307526121-12059-2-git-send-email-zhangfei.gao@marvell.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1307526121-12059-1-git-send-email-zhangfei.gao@marvell.com> References: <1307526121-12059-1-git-send-email-zhangfei.gao@marvell.com> X-Barracuda-Connect: maili.marvell.com[10.68.76.51] X-Barracuda-Start-Time: 1307526129 X-Barracuda-URL: http://10.68.76.222:80/cgi-mod/mark.cgi X-Barracuda-Spam-Score: -1002.00 X-Barracuda-Spam-Status: No, SCORE=-1002.00 using global scores of TAG_LEVEL=1000.0 QUARANTINE_LEVEL=1000.0 KILL_LEVEL=1000.0 Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Wed, 08 Jun 2011 09:42:12 +0000 (UTC) SDHCI driver for PXAV3 SoCs, such as MMP2, the driver based on sdhci-pltfm to handle resource etc. Signed-off-by: Zhangfei Gao Signed-off-by: Philip Rakity --- arch/arm/plat-pxa/include/plat/sdhci.h | 35 ++++- drivers/mmc/host/Kconfig | 12 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pxav3.c | 289 ++++++++++++++++++++++++++++++++ 4 files changed, 332 insertions(+), 5 deletions(-) create mode 100644 drivers/mmc/host/sdhci-pxav3.c diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h index 1ab332e..6873dc5 100644 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -15,21 +15,46 @@ /* pxa specific flag */ /* Require clock free running */ -#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) - +#define PXA_FLAG_ENABLE_CLOCK_GATING (1<<0) +/* card alwayes wired to host, like on-chip emmc */ +#define PXA_FLAG_CARD_PERMANENT (1<<1) /* Board design supports 8-bit data on SD/SDIO BUS */ #define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) /* * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI - * @max_speed: the maximum speed supported - * @quirks: quirks of specific device * @flags: flags for platform requirement + * @clk_delay_cycles: + * mmp2: each step is roughly 100ps, 5bits width + * pxa910: each step is 1ns, 4bits width + * @clk_delay_sel: select clk_delay, used on pxa910 + * 0: choose feedback clk + * 1: choose feedback clk + delay value + * 2: choose internal clk + * @clk_delay_enable: enable clk_delay or not, used on pxa910 + * @ext_cd_gpio: gpio pin used for external CD line + * @ext_cd_gpio_invert: invert values for external CD gpio line + * @max_speed: the maximum speed supported + * @host_caps: Standard MMC host capabilities bit field. + * @quirks: quirks of platfrom + * @pm_caps: pm_caps of platfrom */ struct sdhci_pxa_platdata { + unsigned int flags; + unsigned int clk_delay_cycles; + unsigned int clk_delay_sel; + bool clk_delay_enable; + unsigned int ext_cd_gpio; + bool ext_cd_gpio_invert; unsigned int max_speed; + unsigned int host_caps; unsigned int quirks; - unsigned int flags; + unsigned int pm_caps; +}; + +struct sdhci_pxa { + u8 clk_enable; + u8 power_mode; }; #endif /* __PLAT_PXA_SDHCI_H */ diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 74e77c9..6525a04 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -193,6 +193,18 @@ config MMC_SDHCI_PXA If unsure, say N. +config MMC_SDHCI_PXAV3 + tristate "Marvell MMP2 SD Host Controller support (PXAV3)" + select MMC_SDHCI + select MMC_SDHCI_PLTFM + default CPU_MMP2 + help + This selects the Marvell(R) PXAV3 SD Host Controller. + If you have a MMP2 platform with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_SPEAR tristate "SDHCI support on ST SPEAr platform" depends on MMC_SDHCI && PLAT_SPEAR diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index bf479ab..688cc52 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_SDHCI_PXA) += sdhci-pxa.o +obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c new file mode 100644 index 0000000..901f00f --- /dev/null +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -0,0 +1,289 @@ +/* + * Copyright (C) 2010 Marvell International Ltd. + * Zhangfei Gao + * Kevin Wang + * Mingwei Wang + * Philip Rakity + * Mark Brown + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sdhci.h" +#include "sdhci-pltfm.h" + +#define SD_CLOCK_BURST_SIZE_SETUP 0x10A +#define SDCLK_SEL 0x100 +#define SDCLK_DELAY_SHIFT 9 +#define SDCLK_DELAY_MASK 0x1f + +#define SD_CFG_FIFO_PARAM 0x100 +#define SDCFG_GEN_PAD_CLK_ON (1<<6) +#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF +#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24 + +#define SD_SPI_MODE 0x108 +#define SD_CE_ATA_1 0x10C + +#define SD_CE_ATA_2 0x10E +#define SDCE_MISC_INT (1<<2) +#define SDCE_MISC_INT_EN (1<<1) + +static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + + if (mask == SDHCI_RESET_ALL) { + /* + * tune timing of read data/command when crc error happen + * no performance impact + */ + if (pdata && 0 != pdata->clk_delay_cycles) { + u16 tmp; + + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) + << SDCLK_DELAY_SHIFT; + tmp |= SDCLK_SEL; + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + } + } +} + +#define MAX_WAIT_COUNT 5 +static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + u16 tmp; + int count; + + if (pxa->power_mode == MMC_POWER_UP + && power_mode == MMC_POWER_ON) { + + dev_dbg(mmc_dev(host->mmc), + "%s: slot->power_mode = %d," + "ios->power_mode = %d\n", + __func__, + pxa->power_mode, + power_mode); + + /* set we want notice of when 74 clocks are sent */ + tmp = readw(host->ioaddr + SD_CE_ATA_2); + tmp |= SDCE_MISC_INT_EN; + writew(tmp, host->ioaddr + SD_CE_ATA_2); + + /* start sending the 74 clocks */ + tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM); + tmp |= SDCFG_GEN_PAD_CLK_ON; + writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM); + + /* slowest speed is about 100KHz or 10usec per clock */ + udelay(740); + count = 0; + + while (count++ < MAX_WAIT_COUNT) { + if ((readw(host->ioaddr + SD_CE_ATA_2) + & SDCE_MISC_INT) == 0) + break; + udelay(10); + } + + if (count == MAX_WAIT_COUNT) + dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n"); + + /* clear the interrupt bit if posted */ + tmp = readw(host->ioaddr + SD_CE_ATA_2); + tmp |= SDCE_MISC_INT; + writew(tmp, host->ioaddr + SD_CE_ATA_2); + } + pxa->power_mode = power_mode; +} + +static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) +{ + u16 ctrl_2; + + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_UHS_SDR25: + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_DDR50: + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + dev_dbg(mmc_dev(host->mmc), + "%s uhs = %d, ctrl_2 = %04X\n", + __func__, uhs, ctrl_2); + + return 0; +} + +static struct sdhci_ops pxav3_sdhci_ops = { + .platform_reset_exit = pxav3_set_private_registers, + .set_uhs_signaling = pxav3_set_uhs_signaling, + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks, +}; + +static int __devinit sdhci_pxav3_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host = NULL; + struct sdhci_pxa *pxa = NULL; + int ret; + struct clk *clk; + + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + if (!pxa) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, NULL); + if (IS_ERR(host)) { + kfree(pxa); + return PTR_ERR(host); + } + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pxa; + + clk = clk_get(dev, "PXA-SDHCLK"); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get; + } + pltfm_host->clk = clk; + clk_enable(clk); + + host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC; + + /* enable 1/8V DDR capable */ + host->mmc->caps |= MMC_CAP_1_8V_DDR; + + if (pdata) { + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { + /* on-chip device */ + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + } + + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + if (pdata->quirks) + host->quirks |= pdata->quirks; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + } + + host->ops = &pxav3_sdhci_ops; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add host\n"); + goto err_add_host; + } + + platform_set_drvdata(pdev, host); + + return 0; + +err_add_host: + clk_disable(clk); + clk_put(clk); +err_clk_get: + sdhci_pltfm_free(pdev); + kfree(pxa); + return ret; +} + +static int __devexit sdhci_pxav3_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + + sdhci_remove_host(host, 1); + + clk_disable(pltfm_host->clk); + clk_put(pltfm_host->clk); + sdhci_pltfm_free(pdev); + kfree(pxa); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sdhci_pxav3_driver = { + .driver = { + .name = "sdhci-pxav3", + .owner = THIS_MODULE, + }, + .probe = sdhci_pxav3_probe, + .remove = __devexit_p(sdhci_pxav3_remove), +#ifdef CONFIG_PM + .suspend = sdhci_pltfm_suspend, + .resume = sdhci_pltfm_resume, +#endif +}; +static int __init sdhci_pxav3_init(void) +{ + return platform_driver_register(&sdhci_pxav3_driver); +} + +static void __exit sdhci_pxav3_exit(void) +{ + platform_driver_unregister(&sdhci_pxav3_driver); +} + +module_init(sdhci_pxav3_init); +module_exit(sdhci_pxav3_exit); + +MODULE_DESCRIPTION("SDHCI driver for pxav3"); +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_LICENSE("GPL v2"); +