| Message ID | 1311711119-6286-3-git-send-email-per.forlin@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2011/7/27 Per Forlin <per.forlin@linaro.org>: > This adds support to inject data errors after a completed host transfer. > The mmc core will return error even though the host transfer is successful. > This simple fault injection proved to be very useful to test the > non-blocking error handling in the mmc_blk_issue_rw_rq(). > Random faults can also test how the host driver handles pre_req() > and post_req() in case of errors. Looks good but I have one question. > @@ -304,6 +307,10 @@ struct mmc_host { > > struct mmc_async_req *areq; /* active async req */ > > +#ifdef CONFIG_FAIL_MMC_REQUEST > + u8 make_it_fail; > + struct fault_attr fail_mmc_request; > +#endif > unsigned long private[0] ____cacheline_aligned; > }; I think make_it_fail is not needed anymore because if fail_attr is defined per-host then you can enable it by setting probability=0 or times=0 per-host. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 27 July 2011 01:17, Akinobu Mita <akinobu.mita@gmail.com> wrote: > 2011/7/27 Per Forlin <per.forlin@linaro.org>: >> This adds support to inject data errors after a completed host transfer. >> The mmc core will return error even though the host transfer is successful. >> This simple fault injection proved to be very useful to test the >> non-blocking error handling in the mmc_blk_issue_rw_rq(). >> Random faults can also test how the host driver handles pre_req() >> and post_req() in case of errors. > > Looks good but I have one question. > >> @@ -304,6 +307,10 @@ struct mmc_host { >> >> struct mmc_async_req *areq; /* active async req */ >> >> +#ifdef CONFIG_FAIL_MMC_REQUEST >> + u8 make_it_fail; >> + struct fault_attr fail_mmc_request; >> +#endif >> unsigned long private[0] ____cacheline_aligned; >> }; > > I think make_it_fail is not needed anymore because if fail_attr is > defined per-host then you can enable it by setting probability=0 > or times=0 per-host. > Yes, if there are many debugfs entries, one for each host make_if_fail is no longer necessary. There is an issue with patch v4 now when fault_attr is per-host. Without your patch the entry is still created at the root but there are many instances of fault-attr. I think it's better to wait for your patch to make it into the mmc-next tree before submitting my patch. I will prepare a patch v5 that depends on your upcoming changes in fault-inject with a note that states the dependency. Would you mind adding "patch 1/3" (export_symbol_gpl) to your patch-set since it depends on the new function names in your patch? If not, I can resend the patch on top of your changes to match the new function names if you prefer to have this patch separate. Please let me know. Thanks, Per -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2011/7/27 Per Forlin <per.forlin@linaro.org>: > There is an issue with patch v4 now when fault_attr is per-host. > Without your patch the entry is still created at the root but there > are many instances of fault-attr. I think it's better to wait for your > patch to make it into the mmc-next tree before submitting my patch. I > will prepare a patch v5 that depends on your upcoming changes in > fault-inject with a note that states the dependency. Or you can prepare a patch for -mm and ask Andrew to add it to the -mm tree. > Would you mind adding "patch 1/3" (export_symbol_gpl) to your > patch-set since it depends on the new function names in your patch? > If not, I can resend the patch on top of your changes to match the new > function names if you prefer to have this patch separate. I recommend it to be a part of your patchset. The new function name (fault_create_debugfs_attr) is not likely to change for a time. You can add Acked-by: Akinobu Mita <akinobu.mita@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 27 July 2011 18:08, Akinobu Mita <akinobu.mita@gmail.com> wrote: > 2011/7/27 Per Forlin <per.forlin@linaro.org>: > >> There is an issue with patch v4 now when fault_attr is per-host. >> Without your patch the entry is still created at the root but there >> are many instances of fault-attr. I think it's better to wait for your >> patch to make it into the mmc-next tree before submitting my patch. I >> will prepare a patch v5 that depends on your upcoming changes in >> fault-inject with a note that states the dependency. > > Or you can prepare a patch for -mm and ask Andrew to add it to the -mm > tree. > Thanks for the tip, >> Would you mind adding "patch 1/3" (export_symbol_gpl) to your >> patch-set since it depends on the new function names in your patch? >> If not, I can resend the patch on top of your changes to match the new >> function names if you prefer to have this patch separate. > > I recommend it to be a part of your patchset. The new function name > (fault_create_debugfs_attr) is not likely to change for a time. You can > add Acked-by: Akinobu Mita <akinobu.mita@gmail.com> > Beside fault_create_debugfs_attr() the other function is should_fail. I presume this name will be changed too, and start with the fault_? Regards, Per -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index f091b43..c9195b0 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -24,6 +24,11 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> +#ifdef CONFIG_FAIL_MMC_REQUEST +#include <linux/fault-inject.h> +#include <linux/random.h> +#endif + #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> @@ -82,6 +87,44 @@ static void mmc_flush_scheduled_work(void) flush_workqueue(workqueue); } +#ifdef CONFIG_FAIL_MMC_REQUEST + +/* + * Internal function. Inject random data errors. + * If mmc_data is NULL no errors are injected. + */ +static void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + static const int data_errors[] = { + -ETIMEDOUT, + -EILSEQ, + -EIO, + }; + + if (!data) + return; + + if (cmd->error || data->error || !host->make_it_fail || + !should_fail(&host->fail_mmc_request, data->blksz * data->blocks)) + return; + + data->error = data_errors[random32() % ARRAY_SIZE(data_errors)]; + data->bytes_xfered = (random32() % (data->bytes_xfered >> 9)) << 9; +} + +#else /* CONFIG_FAIL_MMC_REQUEST */ + +static void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ +} + +#endif /* CONFIG_FAIL_MMC_REQUEST */ + + /** * mmc_request_done - finish processing an MMC request * @host: MMC host which completed request @@ -108,6 +151,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) cmd->error = 0; host->ops->request(host, mrq); } else { + mmc_should_fail_request(host, mrq); + led_trigger_event(host->led, LED_OFF); pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n", diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 998797e..5f885a4 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -12,6 +12,9 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/stat.h> +#ifdef CONFIG_FAIL_MMC_REQUEST +#include <linux/fault-inject.h> +#endif #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -158,6 +161,20 @@ static int mmc_clock_opt_set(void *data, u64 val) return 0; } +#ifdef CONFIG_FAIL_MMC_REQUEST + +static DECLARE_FAULT_ATTR(fail_mmc_request); +/* + * Internal function. Pass the boot param fail_mmc_request to + * the setup fault injection attributes routine. + */ +static int __init setup_fail_mmc_request(char *str) +{ + return setup_fault_attr(&fail_mmc_request, str); +} +__setup("fail_mmc_request=", setup_fail_mmc_request); +#endif + DEFINE_SIMPLE_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set, "%llu\n"); @@ -188,6 +205,15 @@ void mmc_add_host_debugfs(struct mmc_host *host) root, &host->clk_delay)) goto err_node; #endif +#ifdef CONFIG_FAIL_MMC_REQUEST + if (!debugfs_create_u8("make-it-fail", S_IRUSR | S_IWUSR, + root, &host->make_it_fail)) + goto err_node; + host->fail_mmc_request = fail_mmc_request; + if (init_fault_attr_dentries(&host->fail_mmc_request, + "fail_mmc_request")) + goto err_node; +#endif return; err_node: diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0f83858..3b57f4b 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -12,6 +12,9 @@ #include <linux/leds.h> #include <linux/sched.h> +#ifdef CONFIG_FAIL_MMC_REQUEST +#include <linux/fault-inject.h> +#endif #include <linux/mmc/core.h> #include <linux/mmc/pm.h> @@ -304,6 +307,10 @@ struct mmc_host { struct mmc_async_req *areq; /* active async req */ +#ifdef CONFIG_FAIL_MMC_REQUEST + u8 make_it_fail; + struct fault_attr fail_mmc_request; +#endif unsigned long private[0] ____cacheline_aligned; }; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index dd373c8..e29e36d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1067,6 +1067,17 @@ config FAIL_IO_TIMEOUT Only works with drivers that use the generic timeout handling, for others it wont do anything. +config FAIL_MMC_REQUEST + bool "Fault-injection capability for MMC IO" + select DEBUG_FS + depends on FAULT_INJECTION && MMC + help + Provide fault-injection capability for MMC IO. + This will make the mmc core return data errors. This is + useful to test the error handling in the mmc block device + and to test how the mmc host driver handles retries from + the block device. + config FAULT_INJECTION_DEBUG_FS bool "Debugfs entries for fault-injection capabilities" depends on FAULT_INJECTION && SYSFS && DEBUG_FS
This adds support to inject data errors after a completed host transfer. The mmc core will return error even though the host transfer is successful. This simple fault injection proved to be very useful to test the non-blocking error handling in the mmc_blk_issue_rw_rq(). Random faults can also test how the host driver handles pre_req() and post_req() in case of errors. Signed-off-by: Per Forlin <per.forlin@linaro.org> --- drivers/mmc/core/core.c | 45 ++++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/debugfs.c | 26 +++++++++++++++++++++++++ include/linux/mmc/host.h | 7 ++++++ lib/Kconfig.debug | 11 ++++++++++ 4 files changed, 89 insertions(+), 0 deletions(-)