diff mbox

[RFC,07/13] mmc: omap_hsmmc: dma_request_slave_channel() support for DT platforms

Message ID 1348152226-13588-8-git-send-email-mporter@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Matt Porter Sept. 20, 2012, 2:43 p.m. UTC
For platforms with DT populated, use dma_request_slave_channel()
to acquire the DMA channel. For !DT platforms, we fall back to
explicitly passing the omap_dma_filter_fn() to dma_request_channel().
Once all platforms boot from DT, the dma_request_channel() path can
be dropped.

Signed-off-by: Matt Porter <mporter@ti.com>
---
 drivers/mmc/host/omap_hsmmc.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

Comments

Tony Lindgren Sept. 20, 2012, 10:16 p.m. UTC | #1
* Matt Porter <mporter@ti.com> [120920 07:43]:
> For platforms with DT populated, use dma_request_slave_channel()
> to acquire the DMA channel. For !DT platforms, we fall back to
> explicitly passing the omap_dma_filter_fn() to dma_request_channel().
> Once all platforms boot from DT, the dma_request_channel() path can
> be dropped.
> 
> Signed-off-by: Matt Porter <mporter@ti.com>
> ---
>  drivers/mmc/host/omap_hsmmc.c |   16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 3a09f93..c82d0ab 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1923,14 +1923,26 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
>  	dma_cap_zero(mask);
>  	dma_cap_set(DMA_SLAVE, mask);
>  
> -	host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req);
> +	if (pdev->dev.of_node)
> +		host->rx_chan =
> +			dma_request_slave_channel(&pdev->dev, "rx");
> +	else
> +		host->rx_chan = dma_request_channel(mask,
> +						    omap_dma_filter_fn,
> +						    &rx_req);
>  	if (!host->rx_chan) {
>  		dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req);
>  		ret = -ENXIO;
>  		goto err_irq;
>  	}
>  
> -	host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req);
> +	if (pdev->dev.of_node)
> +		host->tx_chan =
> +			dma_request_slave_channel(&pdev->dev, "tx");
> +	else
> +		host->tx_chan = dma_request_channel(mask,
> +						    omap_dma_filter_fn,
> +						    &tx_req);
>  	if (!host->tx_chan) {
>  		dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req);
>  		ret = -ENXIO;
> 

Here to the omap_hsmmc.c driver should not need to care about which
way to request the dma channels.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 3a09f93..c82d0ab 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1923,14 +1923,26 @@  static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req);
+	if (pdev->dev.of_node)
+		host->rx_chan =
+			dma_request_slave_channel(&pdev->dev, "rx");
+	else
+		host->rx_chan = dma_request_channel(mask,
+						    omap_dma_filter_fn,
+						    &rx_req);
 	if (!host->rx_chan) {
 		dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req);
 		ret = -ENXIO;
 		goto err_irq;
 	}
 
-	host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req);
+	if (pdev->dev.of_node)
+		host->tx_chan =
+			dma_request_slave_channel(&pdev->dev, "tx");
+	else
+		host->tx_chan = dma_request_channel(mask,
+						    omap_dma_filter_fn,
+						    &tx_req);
 	if (!host->tx_chan) {
 		dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req);
 		ret = -ENXIO;