@@ -960,16 +960,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
/* Card is an ultra-high-speed card */
mmc_card_set_uhs(card);
-
- /*
- * Since initialization is now complete, enable preset
- * value registers for UHS-I cards.
- */
- if (host->ops->enable_preset_value) {
- mmc_host_clk_hold(card->host);
- host->ops->enable_preset_value(host, true);
- mmc_host_clk_release(card->host);
- }
} else {
/*
* Attempt to change to high-speed (if supported)
@@ -1148,13 +1138,6 @@ int mmc_attach_sd(struct mmc_host *host)
BUG_ON(!host);
WARN_ON(!host->claimed);
- /* Disable preset value enable if already set since last time */
- if (host->ops->enable_preset_value) {
- mmc_host_clk_hold(host);
- host->ops->enable_preset_value(host, false);
- mmc_host_clk_release(host);
- }
-
err = mmc_send_app_op_cond(host, 0, &ocr);
if (err)
return err;
@@ -53,6 +53,7 @@ static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
static void sdhci_finish_command(struct sdhci_host *);
static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
static void sdhci_tuning_timer(unsigned long data);
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
#ifdef CONFIG_PM_RUNTIME
static int sdhci_runtime_pm_get(struct sdhci_host *host);
@@ -1095,6 +1096,34 @@ static void sdhci_finish_command(struct sdhci_host *host)
}
}
+static u16 sdhci_get_preset_value(struct sdhci_host *host)
+{
+ u16 ctrl, preset = 0;
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ switch (ctrl & SDHCI_CTRL_UHS_MASK) {
+ case SDHCI_CTRL_UHS_SDR12:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+ break;
+ case SDHCI_CTRL_UHS_SDR25:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
+ break;
+ case SDHCI_CTRL_UHS_SDR50:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
+ break;
+ case SDHCI_CTRL_UHS_SDR104:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
+ break;
+ case SDHCI_CTRL_UHS_DDR50:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
+ break;
+ default:
+ BUG();
+ }
+ return preset;
+}
+
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
int div = 0; /* Initialized for compiler warning */
@@ -1119,35 +1148,45 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
goto out;
if (host->version >= SDHCI_SPEC_300) {
+ if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
+ SDHCI_CTRL_PRESET_VAL_ENABLE) {
+ u16 pre_val;
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ pre_val = sdhci_get_preset_value(host);
+ div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
+ >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
+ if (host->clk_mul &&
+ (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
+ clk = SDHCI_PROG_CLOCK_MODE;
+ real_div = div + 1;
+ clk_mul = host->clk_mul;
+ } else {
+ if (div == 0)
+ real_div = 1;
+ else
+ real_div = div << 1;
+ }
+ goto preset;
+ }
/*
* Check if the Host Controller supports Programmable Clock
* Mode.
*/
if (host->clk_mul) {
- u16 ctrl;
-
+ for (div = 1; div <= 1024; div++) {
+ if (((host->max_clk * host->clk_mul) /
+ div) <= clock)
+ break;
+ }
/*
- * We need to figure out whether the Host Driver needs
- * to select Programmable Clock Mode, or the value can
- * be set automatically by the Host Controller based on
- * the Preset Value registers.
+ * Set Programmable Clock Mode in the Clock
+ * Control register.
*/
- ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
- for (div = 1; div <= 1024; div++) {
- if (((host->max_clk * host->clk_mul) /
- div) <= clock)
- break;
- }
- /*
- * Set Programmable Clock Mode in the Clock
- * Control register.
- */
- clk = SDHCI_PROG_CLOCK_MODE;
- real_div = div;
- clk_mul = host->clk_mul;
- div--;
- }
+ clk = SDHCI_PROG_CLOCK_MODE;
+ real_div = div;
+ clk_mul = host->clk_mul;
+ div--;
} else {
/* Version 3.00 divisors must be a multiple of 2. */
if (host->max_clk <= clock)
@@ -1172,6 +1211,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
div >>= 1;
}
+preset:
if (real_div)
host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
@@ -1377,6 +1417,10 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
sdhci_reinit(host);
}
+ if (host->version >= SDHCI_SPEC_300 &&
+ (ios->power_mode == MMC_POWER_UP))
+ sdhci_enable_preset_value(host, false);
+
sdhci_set_clock(host, ios->clock);
ios->clock = host->clock;
@@ -1489,7 +1533,19 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
-
+ if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+ ((ios->timing == MMC_TIMING_UHS_SDR12) ||
+ (ios->timing == MMC_TIMING_UHS_SDR25) ||
+ (ios->timing == MMC_TIMING_UHS_SDR50) ||
+ (ios->timing == MMC_TIMING_UHS_SDR104) ||
+ (ios->timing == MMC_TIMING_UHS_DDR50))) {
+ u16 preset;
+
+ sdhci_enable_preset_value(host, true);
+ preset = sdhci_get_preset_value(host);
+ ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
+ >> SDHCI_PRESET_DRV_SHIFT;
+ }
/* Re-enable SD Clock */
clock = host->clock;
host->clock = 0;
@@ -1951,7 +2007,8 @@ out:
return err;
}
-static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
+
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
{
u16 ctrl;
unsigned long flags;
@@ -1960,8 +2017,6 @@ static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
if (host->version < SDHCI_SPEC_300)
return;
- spin_lock_irqsave(&host->lock, flags);
-
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
/*
@@ -1977,17 +2032,6 @@ static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
host->flags &= ~SDHCI_PV_ENABLED;
}
-
- spin_unlock_irqrestore(&host->lock, flags);
-}
-
-static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
-{
- struct sdhci_host *host = mmc_priv(mmc);
-
- sdhci_runtime_pm_get(host);
- sdhci_do_enable_preset_value(host, enable);
- sdhci_runtime_pm_put(host);
}
static const struct mmc_host_ops sdhci_ops = {
@@ -1998,7 +2042,6 @@ static const struct mmc_host_ops sdhci_ops = {
.enable_sdio_irq = sdhci_enable_sdio_irq,
.start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
.execute_tuning = sdhci_execute_tuning,
- .enable_preset_value = sdhci_enable_preset_value,
};
/*****************************************************************************\
@@ -2588,8 +2631,12 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
sdhci_do_set_ios(host, &host->mmc->ios);
sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
- if (host_flags & SDHCI_PV_ENABLED)
- sdhci_do_enable_preset_value(host, true);
+ if ((host_flags & SDHCI_PV_ENABLED) &&
+ !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+ spin_lock_irqsave(&host->lock, flags);
+ sdhci_enable_preset_value(host, true);
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
/* Set the re-tuning expiration flag */
if (host->flags & SDHCI_USING_RETUNING_TIMER)
@@ -227,6 +227,18 @@
/* 60-FB reserved */
+#define SDHCI_PRESET_FOR_SDR12 0x66
+#define SDHCI_PRESET_FOR_SDR25 0x68
+#define SDHCI_PRESET_FOR_SDR50 0x6A
+#define SDHCI_PRESET_FOR_SDR104 0x6C
+#define SDHCI_PRESET_FOR_DDR50 0x6E
+#define SDHCI_PRESET_DRV_MASK 0xC000
+#define SDHCI_PRESET_DRV_SHIFT 14
+#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
+#define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10
+#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
+#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
+
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
@@ -133,7 +133,6 @@ struct mmc_host_ops {
/* The tuning command opcode value is different for SD and eMMC cards */
int (*execute_tuning)(struct mmc_host *host, u32 opcode);
- void (*enable_preset_value)(struct mmc_host *host, bool enable);
int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
void (*hw_reset)(struct mmc_host *host);
};
@@ -91,7 +91,7 @@ struct sdhci_host {
unsigned int quirks2; /* More deviations from spec. */
#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
-
+#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<1)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */