diff mbox

[v5,07/13] mmc: sdhci-pxav3: controller can't get base clock

Message ID 1348818972-26711-8-git-send-email-keyuan.liu@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kevin Liu Sept. 28, 2012, 7:56 a.m. UTC 
From: Kevin Liu <kliu5@marvell.com>

Enable the quirk SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN since
SD_CAPABILITIES_1[15:8](BASE_FREQ) can't get correct base
clock value. It return a fixed pre-set value like 200 on
some sdhci-pxav3 based platforms like MMP3 while return 0
on the other sdhci-pxav3 based platforms.
So we enable the quirk and get the base clock via function
get_max_clock.
Also add get_max_clock.

Reported-by: Philip Rakity <prakity@marvell.com>
Reviewed-by: Philip Rakity <prakity@Marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
---
 drivers/mmc/host/sdhci-pxav3.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)

Comments

Zhangfei Gao Sept. 29, 2012, 7:44 a.m. UTC | #1 
On Fri, Sep 28, 2012 at 3:56 PM, Kevin Liu <keyuan.liu@gmail.com> wrote:
> From: Kevin Liu <kliu5@marvell.com>
>
> Enable the quirk SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN since
> SD_CAPABILITIES_1[15:8](BASE_FREQ) can't get correct base
> clock value. It return a fixed pre-set value like 200 on
> some sdhci-pxav3 based platforms like MMP3 while return 0
> on the other sdhci-pxav3 based platforms.
> So we enable the quirk and get the base clock via function
> get_max_clock.
> Also add get_max_clock.
>
> Reported-by: Philip Rakity <prakity@marvell.com>
> Reviewed-by: Philip Rakity <prakity@Marvell.com>
> Signed-off-by: Kevin Liu <kliu5@marvell.com>

Acked-by:  Zhangfei Gao <zhangfei.gao@marvell.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e918a2b..ccd1906 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -163,10 +163,18 @@  static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 	return 0;
 }
 
+static u32 pxav3_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return clk_get_rate(pltfm_host->clk);
+}
+
 static struct sdhci_ops pxav3_sdhci_ops = {
 	.platform_reset_exit = pxav3_set_private_registers,
 	.set_uhs_signaling = pxav3_set_uhs_signaling,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
+	.get_max_clock = pxav3_get_max_clock,
 };
 
 #ifdef CONFIG_OF
@@ -249,7 +257,8 @@  static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 
 	host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
 		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
-		| SDHCI_QUIRK_32BIT_ADMA_SIZE;
+		| SDHCI_QUIRK_32BIT_ADMA_SIZE
+		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
 
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;