| Message ID | 1353003922-1631-1-git-send-email-alcooperx@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 7cc4638..6d669c3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1051,6 +1051,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (mmc_card_highspeed(card) || mmc_card_hs200(card)) { if (max_dtr > card->ext_csd.hs_max_dtr) max_dtr = card->ext_csd.hs_max_dtr; + if (mmc_card_highspeed(card) && (max_dtr > 52000000)) + max_dtr = 52000000; } else if (max_dtr > card->csd.max_dtr) { max_dtr = card->csd.max_dtr; }
If "caps2" host capabilities does not indicate support for MMC HS200, don't allow clock speeds >52MHz. Currently, for MMC, the clock speed is set to the lesser of the max speed the eMMC module supports (card->ext_csd.hs_max_dtr) or the max base clock of the host controller (host->f_max based on BASE_CLK_FREQ in the host CAPS register). This means that a host controller that doesn't support HS200 mode but has a base clock of 100MHz and an eMMC module that supports HS200 speeds will end up using a 100MHz clock. Signed-off-by: Al Cooper <alcooperx@gmail.com> --- drivers/mmc/core/mmc.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)