@@ -88,6 +88,7 @@
#define CMD_SET_TBIT (1 << 7) /* 1: tran mission bit "Low" */
#define CMD_SET_OPDM (1 << 6) /* 1: open/drain */
#define CMD_SET_CCSH (1 << 5)
+#define CMD_SET_DARS (1 << 2) /* Dual Data Rate */
#define CMD_SET_DATW_1 ((0 << 1) | (0 << 0)) /* 1bit */
#define CMD_SET_DATW_4 ((0 << 1) | (1 << 0)) /* 4bit */
#define CMD_SET_DATW_8 ((1 << 1) | (0 << 0)) /* 8bit */
@@ -216,6 +217,7 @@ struct sh_mmcif_host {
struct clk *hclk;
unsigned int clk;
int bus_width;
+ unsigned char timing;
bool sd_error;
bool dying;
long timeout;
@@ -781,6 +783,17 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
dev_err(&host->pd->dev, "Unsupported bus width.\n");
break;
}
+ switch (host->timing) {
+ case MMC_TIMING_UHS_DDR50:
+ /*
+ * MMC core will only set this timing, if the host
+ * advertises the MMC_CAP_UHS_DDR50 capability. MMCIF
+ * implementations with this capability, e.g. sh73a0,
+ * will have to set it in their platform data.
+ */
+ tmp |= CMD_SET_DARS;
+ break;
+ }
}
/* DWEN */
if (opc == MMC_WRITE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK)
@@ -1002,6 +1015,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
sh_mmcif_clock_control(host, ios->clock);
}
+ host->timing = ios->timing;
host->bus_width = ios->bus_width;
host->state = STATE_IDLE;
}