diff mbox

[11/12] mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE

Message ID 1370876627-13439-12-git-send-email-ulf.hansson@stericsson.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ulf Hansson June 10, 2013, 3:03 p.m. UTC 
From: Ulf Hansson <ulf.hansson@linaro.org>

MMC_CAP2_FULL_PWR_CYCLE shall be set by host drivers which are able to
do a complete power cycle of the card. In the eMMC case that includes
both vcc and vccq.

This CAP is providing the protocol layer with important information,
needed to take optimized decisions during card initialization and in
the suspend/resume sequence.

MMC_CAP2_POWEROFF_NOTIFY is replaced by MMC_CAP2_FULL_PWR_CYCLE, since
it makes sense to use a wider scope for it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/mmc.c   |    2 +-
 include/linux/mmc/host.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a96dcaa..38315f8 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1484,7 +1484,7 @@  static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 		goto out;
 
 	if (mmc_can_poweroff_notify(host->card) &&
-		((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) || !is_suspend))
+		((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend))
 		err = mmc_poweroff_notify(host->card, notify_type);
 	else if (mmc_can_sleep(host->card))
 		err = mmc_sleep(host);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 2e34ee5..c6dedc7 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -264,7 +264,7 @@  struct mmc_host {
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
 #define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
-#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
+#define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
 #define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
 #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */