diff mbox

[5/5] mmc: dw_mmc: Set timeout to max upon resume

Message ID 1373391071-6312-6-git-send-email-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Doug Anderson July 9, 2013, 5:31 p.m. UTC
The TMOUT register is initted to 0xffffffff at probe time but isn't
initted after suspend/resume.  Add an init of this value.

No problems were observed without this (it will also get initted in
__dw_mci_start_request if there is data to send), but it makes the
register dump before and after suspend clean.

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
 drivers/mmc/host/dw_mmc.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox

Patch

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index a0a07df..eedb517 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2494,6 +2494,9 @@  int dw_mci_resume(struct dw_mci *host)
 	/* Restore the old value at FIFOTH register */
 	mci_writel(host, FIFOTH, host->fifoth_val);
 
+	/* Put in max timeout */
+	mci_writel(host, TMOUT, 0xFFFFFFFF);
+
 	mci_writel(host, RINTSTS, 0xFFFFFFFF);
 	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
 		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |