From patchwork Thu Sep 12 14:56:41 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 2878671 Return-Path: X-Original-To: patchwork-linux-mmc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 62C419F1BF for ; Thu, 12 Sep 2013 14:57:25 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 4411720320 for ; Thu, 12 Sep 2013 14:57:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id A15672008F for ; Thu, 12 Sep 2013 14:57:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751969Ab3ILOzy (ORCPT ); Thu, 12 Sep 2013 10:55:54 -0400 Received: from ns.mm-sol.com ([212.124.72.66]:49765 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751034Ab3ILOzw (ORCPT ); Thu, 12 Sep 2013 10:55:52 -0400 Received: from mms.int.mm-sol.com (unknown [172.18.0.3]) by extserv.mm-sol.com (Postfix) with ESMTPSA id BACD4C6B3; Thu, 12 Sep 2013 17:55:50 +0300 (EEST) From: Georgi Djakov To: linux-mmc@vger.kernel.org Cc: cjb@laptop.org, grant.likely@linaro.org, rob.herring@calxeda.com, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, Georgi Djakov , Asutosh Das , Venkat Gopalakrishnan , Sahitya Tummala , Subhash Jadavani Subject: [PATCH v4] mmc: sdhci-msm: Add support for MSM chipsets Date: Thu, 12 Sep 2013 17:56:41 +0300 Message-Id: <1378997801-21986-1-git-send-email-gdjakov@mm-sol.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Spam-Status: No, score=-7.8 required=5.0 tests=BAYES_00,KHOP_BIG_TO_CC, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This platform driver adds the support of Secure Digital Host Controller Interface compliant controller found in Qualcomm MSM chipsets. CC: Asutosh Das CC: Venkat Gopalakrishnan CC: Sahitya Tummala CC: Subhash Jadavani Signed-off-by: Georgi Djakov --- Changes from v3: - Allocate memory for all required structs at once - Added termination entry in sdhci_msm_dt_match[] - Fixed a missing sdhci_pltfm_free() in probe() - Removed redundant of_match_ptr - Removed the unneeded function sdhci_msm_vreg_reset() Changes from v2: - Added DT bindings for clocks - Moved voltage regulators data to platform data - Removed unneeded includes - Removed obsolete and wrapper functions - Removed error checking where unnecessary - Removed redundant _clk suffix from clock names - Just return instead of goto where possible - Minor fixes Changes from v1: - GPIO references are replaced by pinctrl - DT parsing is done mostly by mmc_of_parse() - Use of_match_device() for DT matching - A few minor changes .../devicetree/bindings/mmc/sdhci-msm.txt | 71 +++ drivers/mmc/host/Kconfig | 13 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-msm.c | 660 ++++++++++++++++++++ 4 files changed, 745 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt create mode 100644 drivers/mmc/host/sdhci-msm.c diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt new file mode 100644 index 0000000..ee112da --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -0,0 +1,71 @@ +* Qualcomm SDHCI controller (sdhci-msm) + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-msm driver. + +Required properties: +- compatible: should be "qcom,sdhci-msm" +- reg: should contain SDHC, SD Core register map +- reg-names: indicates various resources passed to driver (via reg proptery) by name + "reg-names" examples are "hc_mem" and "core_mem" +- interrupts: should contain SDHC interrupts +- interrupt-names: indicates interrupts passed to driver (via interrupts property) by name + "interrupt-names" examples are "hc_irq" and "pwr_irq" +- -supply: phandle to the regulator device tree node + "supply-name" examples are "vdd" and "vdd-io" +- pinctrl-names: Should contain only one value - "default". +- pinctrl-0: Should specify pin control groups used for this controller. +- clocks: phandles to clock instances of the device tree nodes +- clock-names: + iface: Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) + core: SDC MMC clock (MCLK) (required) + bus: SDCC bus voter clock (optional) + +Optional properties: +- qcom,bus-speed-mode - specifies supported bus speed modes by host + The supported bus speed modes are : + "HS200_1p8v" - indicates that host can support HS200 at 1.8v + "HS200_1p2v" - indicates that host can support HS200 at 1.2v + "DDR_1p8v" - indicates that host can support DDR mode at 1.8v + "DDR_1p2v" - indicates that host can support DDR mode at 1.2v + +In the following, can be vdd (flash core voltage) or vdd-io (I/O voltage). +- qcom,-always-on - specifies whether supply should be kept "on" always. +- qcom,-lpm-sup - specifies whether supply can be kept in low power mode (lpm). +- qcom,-voltage-level - specifies voltage levels for supply. Should be +specified in pairs (min, max), units uV. +- qcom,-current-level - specifies load levels for supply in lpm or high power mode + (hpm). Should be specified in pairs (lpm, hpm), units uA. + +Example: + + aliases { + sdhc1 = &sdhc_1; + }; + + sdhc_1: qcom,sdhc@f9824900 { + compatible = "qcom,sdhci-msm"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <4>; + non-removable; + + vdd-supply = <&pm8941_l21>; + vdd-io-supply = <&pm8941_l13>; + qcom,vdd-voltage-level = <2950000 2950000>; + qcom,vdd-current-level = <9000 800000>; + qcom,vdd-io-always-on; + qcom,vdd-io-lpm-sup; + qcom,vdd-io-voltage-level = <1800000 2950000>; + qcom,vdd-io-current-level = <6 22000>; + qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; + + clocks = <&iface>, <&core>, <&bus>; + clock-names = "iface", "core", "bus"; + + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b7fd5ab..b2a1fdb 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -322,6 +322,19 @@ config MMC_ATMELMCI If unsure, say N. +config MMC_SDHCI_MSM + tristate "Qualcomm SDHCI Controller Support" + depends on ARCH_MSM + depends on MMC_SDHCI_PLTFM + help + This selects the Secure Digital Host Controller Interface (SDHCI) + support present in MSM SOCs from Qualcomm. The controller + supports SD/MMC/SDIO devices. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_MSM tristate "Qualcomm SDCC Controller Support" depends on MMC && ARCH_MSM diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index c41d0c3..5faed14 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o +obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c new file mode 100644 index 0000000..904158d --- /dev/null +++ b/drivers/mmc/host/sdhci-msm.c @@ -0,0 +1,660 @@ +/* + * drivers/mmc/host/sdhci-msm.c - Qualcomm MSM SDHCI Platform + * driver source file + * + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include "sdhci-pltfm.h" + +#define CORE_HC_MODE 0x78 +#define HC_MODE_EN 0x1 + +#define CORE_POWER 0x0 +#define CORE_SW_RST (1 << 7) + +#define CORE_PWRCTL_STATUS 0xdc +#define CORE_PWRCTL_MASK 0xe0 +#define CORE_PWRCTL_CLEAR 0xe4 +#define CORE_PWRCTL_CTL 0xe8 + +#define CORE_PWRCTL_BUS_OFF 0x01 +#define CORE_PWRCTL_BUS_ON (1 << 1) +#define CORE_PWRCTL_IO_LOW (1 << 2) +#define CORE_PWRCTL_IO_HIGH (1 << 3) + +#define CORE_PWRCTL_BUS_SUCCESS 0x01 +#define CORE_PWRCTL_BUS_FAIL (1 << 1) +#define CORE_PWRCTL_IO_SUCCESS (1 << 2) +#define CORE_PWRCTL_IO_FAIL (1 << 3) + +#define INT_MASK 0xf + +/* This structure keeps information per regulator */ +struct sdhci_msm_reg_data { + /* voltage regulator handle */ + struct regulator *reg; + /* regulator name */ + const char *name; + /* voltage level to be set */ + u32 low_vol_level; + u32 high_vol_level; + /* Load values for low power and high power mode */ + u32 lpm_uA; + u32 hpm_uA; + + /* is this regulator needs to be always on? */ + bool is_always_on; + /* is low power mode setting required for this regulator? */ + bool lpm_sup; +}; + +struct sdhci_msm_pltfm_data { + u32 caps; /* Supported UHS-I Modes */ + u32 caps2; /* More capabilities */ + struct sdhci_msm_reg_data vdd_data; /* VDD/VCC regulator info */ + struct sdhci_msm_reg_data vdd_io_data; /* VDD IO regulator info */ +}; + +struct sdhci_msm_host { + struct platform_device *pdev; + void __iomem *core_mem; /* MSM SDCC mapped address */ + int pwr_irq; /* power irq */ + struct clk *clk; /* main SD/MMC bus clock */ + struct clk *pclk; /* SDHC peripheral bus clock */ + struct clk *bus_clk; /* SDHC bus voter clock */ + struct sdhci_msm_pltfm_data pdata; + struct mmc_host *mmc; + struct sdhci_pltfm_data sdhci_msm_pdata; +}; + +enum vdd_io_level { + /* set vdd_io_data->low_vol_level */ + VDD_IO_LOW, + /* set vdd_io_data->high_vol_level */ + VDD_IO_HIGH, + /* + * set whatever there in voltage_level (third argument) of + * sdhci_msm_set_vdd_io_vol() function. + */ + VDD_IO_SET_LEVEL, +}; + +#define MAX_PROP_SIZE 32 +static int sdhci_msm_dt_parse_vreg_info(struct device *dev, + struct sdhci_msm_reg_data *vreg, + const char *vreg_name) +{ + int len, ret = 0; + const __be32 *prop; + char prop_name[MAX_PROP_SIZE]; + struct device_node *np = dev->of_node; + + snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", vreg_name); + if (!of_parse_phandle(np, prop_name, 0)) { + dev_info(dev, "No vreg data found for %s\n", vreg_name); + ret = -EINVAL; + return ret; + } + + if (!vreg) { + dev_err(dev, "invalid vreg: %s\n", vreg_name); + ret = -EINVAL; + return ret; + } + + vreg->name = vreg_name; + + snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-always-on", vreg_name); + if (of_get_property(np, prop_name, NULL)) + vreg->is_always_on = true; + + snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-lpm-sup", vreg_name); + if (of_get_property(np, prop_name, NULL)) + vreg->lpm_sup = true; + + snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-voltage-level", vreg_name); + prop = of_get_property(np, prop_name, &len); + if (!prop || (len != (2 * sizeof(__be32)))) { + dev_warn(dev, "%s %s property\n", + prop ? "invalid format" : "no", prop_name); + } else { + vreg->low_vol_level = be32_to_cpup(&prop[0]); + vreg->high_vol_level = be32_to_cpup(&prop[1]); + } + + snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-current-level", vreg_name); + prop = of_get_property(np, prop_name, &len); + if (!prop || (len != (2 * sizeof(__be32)))) { + dev_warn(dev, "%s %s property\n", + prop ? "invalid format" : "no", prop_name); + } else { + vreg->lpm_uA = be32_to_cpup(&prop[0]); + vreg->hpm_uA = be32_to_cpup(&prop[1]); + } + + dev_dbg(dev, "%s: %s %s vol=[%d %d]uV, curr=[%d %d]uA\n", + vreg->name, vreg->is_always_on ? "always_on," : "", + vreg->lpm_sup ? "lpm_sup," : "", vreg->low_vol_level, + vreg->high_vol_level, vreg->lpm_uA, vreg->hpm_uA); + + return ret; +} + +/* Parse platform data */ +static int sdhci_msm_populate_pdata(struct device *dev, + struct sdhci_msm_pltfm_data *pdata) +{ + struct device_node *np = dev->of_node; + int len, i; + + if (!pdata) { + dev_err(dev, "invalid platform data\n"); + return -EINVAL; + } + + if (sdhci_msm_dt_parse_vreg_info(dev, &pdata->vdd_data, "vdd")) { + dev_err(dev, "failed parsing vdd data\n"); + return -EINVAL; + } + if (sdhci_msm_dt_parse_vreg_info(dev, &pdata->vdd_io_data, "vdd-io")) { + dev_err(dev, "failed parsing vdd-io data\n"); + return -EINVAL; + } + + len = of_property_count_strings(np, "qcom,bus-speed-mode"); + + for (i = 0; i < len; i++) { + const char *name = NULL; + + of_property_read_string_index(np, + "qcom,bus-speed-mode", i, &name); + if (!name) + continue; + + if (!strncmp(name, "HS200_1p8v", sizeof("HS200_1p8v"))) + pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR; + else if (!strncmp(name, "HS200_1p2v", sizeof("HS200_1p2v"))) + pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR; + else if (!strncmp(name, "DDR_1p8v", sizeof("DDR_1p8v"))) + pdata->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50; + else if (!strncmp(name, "DDR_1p2v", sizeof("DDR_1p2v"))) + pdata->caps |= MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50; + } + + return 0; +} + +/* Regulator utility functions */ +static int sdhci_msm_vreg_init_reg(struct device *dev, + struct sdhci_msm_reg_data *vreg) +{ + int ret = 0; + + /* check if regulator is already initialized? */ + if (!IS_ERR(vreg->reg)) + return ret; + + /* Get the regulator handle */ + vreg->reg = devm_regulator_get(dev, vreg->name); + if (IS_ERR(vreg->reg)) { + ret = PTR_ERR(vreg->reg); + dev_err(dev, "devm_regulator_get(%s) failed. ret=%d\n", + vreg->name, ret); + return ret; + } + + /* sanity check */ + if (!vreg->high_vol_level || !vreg->hpm_uA) { + dev_err(dev, "%s invalid constraints specified\n", vreg->name); + return -EINVAL; + } + + return ret; +} + +static int sdhci_msm_vreg_enable(struct sdhci_msm_reg_data *vreg) +{ + int ret = 0; + + /* Put regulator in HPM (high power mode) */ + ret = regulator_set_optimum_mode(vreg->reg, vreg->hpm_uA); + if (ret < 0) { + pr_err + ("%s: regulator_set_optimum_mode(%s,uA_load=%d) fail(%d)\n", + __func__, vreg->name, vreg->hpm_uA, ret); + return ret; + } + + if (!regulator_is_enabled(vreg->reg)) { + /* Set voltage level */ + ret = regulator_set_voltage(vreg->reg, vreg->high_vol_level, + vreg->high_vol_level); + if (ret) + return ret; + } + ret = regulator_enable(vreg->reg); + if (ret) { + pr_err("%s: regulator_enable(%s) failed. ret=%d\n", + __func__, vreg->name, ret); + return ret; + } + return ret; +} + +static int sdhci_msm_vreg_disable(struct sdhci_msm_reg_data *vreg) +{ + int ret = 0; + + /* Never disable regulator marked as always_on */ + if (regulator_is_enabled(vreg->reg) && !vreg->is_always_on) { + ret = regulator_disable(vreg->reg); + if (ret) { + pr_err("%s: regulator_disable(%s) failed. ret=%d\n", + __func__, vreg->name, ret); + return ret; + } + + ret = regulator_set_optimum_mode(vreg->reg, 0); + if (ret < 0) + return ret; + + /* Set min. voltage level to 0 */ + ret = regulator_set_voltage(vreg->reg, 0, vreg->high_vol_level); + if (ret) + return ret; + } else if (regulator_is_enabled(vreg->reg) && vreg->is_always_on) { + if (vreg->lpm_sup) { + /* Put always_on regulator in LPM (low power mode) */ + ret = regulator_set_optimum_mode(vreg->reg, + vreg->lpm_uA); + if (ret < 0) + return ret; + } + } + + return ret; +} + +static int sdhci_msm_setup_vreg(struct sdhci_msm_pltfm_data *pdata, + bool enable, bool is_init) +{ + int ret = 0, i; + struct sdhci_msm_reg_data *vreg_table[2]; + + vreg_table[0] = &pdata->vdd_data; + vreg_table[1] = &pdata->vdd_io_data; + + for (i = 0; i < ARRAY_SIZE(vreg_table); i++) { + if (vreg_table[i]) { + if (enable) + ret = sdhci_msm_vreg_enable(vreg_table[i]); + else + ret = sdhci_msm_vreg_disable(vreg_table[i]); + if (ret) + return ret; + } + } + return ret; +} + +/* This init function should be called only once for each SDHC slot */ +static int sdhci_msm_vreg_init(struct device *dev, + struct sdhci_msm_pltfm_data *pdata, bool is_init) +{ + int ret = 0; + struct sdhci_msm_reg_data *curr_vdd_reg, *curr_vdd_io_reg; + + curr_vdd_reg = &pdata->vdd_data; + curr_vdd_io_reg = &pdata->vdd_io_data; + + if (!is_init) + /* Deregister all regulators from regulator framework */ + return ret; + + /* + * Get the regulator handle from voltage regulator framework + * and then try to set the voltage level for the regulator + */ + if (curr_vdd_reg) { + ret = sdhci_msm_vreg_init_reg(dev, curr_vdd_reg); + if (ret) + return ret; + } + if (curr_vdd_io_reg) { + ret = sdhci_msm_vreg_init_reg(dev, curr_vdd_io_reg); + if (ret) + return ret; + } + + return ret; +} + +static int sdhci_msm_set_vdd_io_vol(struct sdhci_msm_pltfm_data *pdata, + enum vdd_io_level level, + unsigned int voltage_level) +{ + int ret = 0; + int set_level; + struct sdhci_msm_reg_data *vdd_io_reg = &pdata->vdd_io_data; + + if (vdd_io_reg && regulator_is_enabled(vdd_io_reg->reg)) { + switch (level) { + case VDD_IO_LOW: + set_level = vdd_io_reg->low_vol_level; + break; + case VDD_IO_HIGH: + set_level = vdd_io_reg->high_vol_level; + break; + case VDD_IO_SET_LEVEL: + set_level = voltage_level; + break; + default: + pr_err("%s: invalid argument level = %d", + __func__, level); + return -EINVAL; + } + ret = regulator_set_voltage(vdd_io_reg->reg, + set_level, set_level); + } + + return ret; +} + +static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data) +{ + struct sdhci_msm_host *msm_host = (struct sdhci_msm_host *)data; + u8 irq_status = 0; + u8 irq_ack = 0; + int ret = 0; + + irq_status = readb_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS); + pr_debug("%s: Received IRQ(%d), status=0x%x\n", + mmc_hostname(msm_host->mmc), irq, irq_status); + + /* Clear the interrupt */ + writeb_relaxed(irq_status, (msm_host->core_mem + CORE_PWRCTL_CLEAR)); + /* + * SDHC has core_mem and hc_mem device memory and these memory + * addresses do not fall within 1KB region. Hence, any update to + * core_mem address space would require an mb() to ensure this gets + * completed before its next update to registers within hc_mem. + */ + mb(); + + /* Handle BUS ON/OFF */ + if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF)) { + bool flag = (irq_status & CORE_PWRCTL_BUS_ON) ? 1 : 0; + ret = sdhci_msm_setup_vreg(&msm_host->pdata, flag, false); + if (ret) + irq_ack |= CORE_PWRCTL_BUS_FAIL; + else + irq_ack |= CORE_PWRCTL_BUS_SUCCESS; + } + /* Handle IO LOW/HIGH */ + if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH)) { + /* Switch voltage */ + int io_status = (irq_status & CORE_PWRCTL_IO_LOW) ? + VDD_IO_LOW : VDD_IO_HIGH; + ret = sdhci_msm_set_vdd_io_vol(&msm_host->pdata, io_status, 0); + if (ret) + irq_ack |= CORE_PWRCTL_IO_FAIL; + else + irq_ack |= CORE_PWRCTL_IO_SUCCESS; + } + + /* ACK status to the core */ + writeb_relaxed(irq_ack, (msm_host->core_mem + CORE_PWRCTL_CTL)); + /* + * SDHC has core_mem and hc_mem device memory and these memory + * addresses do not fall within 1KB region. Hence, any update to + * core_mem address space would require an mb() to ensure this gets + * completed before its next update to registers within hc_mem. + */ + mb(); + + pr_debug("%s: Handled IRQ(%d), ret=%d, ack=0x%x\n", + mmc_hostname(msm_host->mmc), irq, ret, irq_ack); + return IRQ_HANDLED; +} + +/* This function returns the max. current supported by VDD rail in mA */ +static u32 sdhci_msm_get_vdd_max_current(struct sdhci_msm_host *host) +{ + struct sdhci_msm_pltfm_data pdata = host->pdata; + return pdata.vdd_data.hpm_uA / 1000; +} + +static const struct of_device_id sdhci_msm_dt_match[] = { + {.compatible = "qcom,sdhci-msm"}, + {}, +}; + +MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match); + +static int sdhci_msm_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_msm_host *msm_host; + struct resource *core_memres = NULL; + int ret = 0, dead = 0; + struct pinctrl *pinctrl; + + msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL); + if (!msm_host) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0); + if (IS_ERR(host)) { + dev_err(mmc_dev(host->mmc), "sdhci_pltfm_init error\n"); + return PTR_ERR(host); + } + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = msm_host; + msm_host->mmc = host->mmc; + msm_host->pdev = pdev; + + ret = mmc_of_parse(host->mmc); + if (ret) { + dev_err(&pdev->dev, "failed parsing mmc device tree\n"); + goto pltfm_free; + } + + /* Extract platform data */ + if (pdev->dev.of_node) { + ret = sdhci_msm_populate_pdata(&pdev->dev, &msm_host->pdata); + if (ret) { + dev_err(&pdev->dev, "DT parsing error\n"); + goto pltfm_free; + } + } else { + dev_err(&pdev->dev, "No device tree node\n"); + goto pltfm_free; + } + + /* Setup pins */ + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, "pins are not configured by the driver\n"); + + /* Setup Clocks */ + + /* Setup SDCC bus voter clock. */ + msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (!IS_ERR_OR_NULL(msm_host->bus_clk)) { + /* Vote for max. clk rate for max. performance */ + ret = clk_set_rate(msm_host->bus_clk, INT_MAX); + if (ret) + goto pltfm_free; + ret = clk_prepare_enable(msm_host->bus_clk); + if (ret) + goto pltfm_free; + } + + /* Setup main peripheral bus clock */ + msm_host->pclk = devm_clk_get(&pdev->dev, "iface"); + if (!IS_ERR(msm_host->pclk)) { + ret = clk_prepare_enable(msm_host->pclk); + if (ret) { + dev_err(&pdev->dev, + "Main peripheral clock setup failed (%d)\n", + ret); + goto bus_clk_disable; + } + } + + /* Setup SDC MMC clock */ + msm_host->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(msm_host->clk)) { + ret = PTR_ERR(msm_host->clk); + dev_err(&pdev->dev, "SDC MMC clock setup failed (%d)\n", ret); + goto pclk_disable; + } + + ret = clk_prepare_enable(msm_host->clk); + if (ret) + goto pclk_disable; + + /* Setup regulators */ + ret = sdhci_msm_vreg_init(&pdev->dev, &msm_host->pdata, true); + if (ret) { + dev_err(&pdev->dev, "Regulator setup failed (%d)\n", ret); + goto clk_disable; + } + + /* Reset the core and Enable SDHC mode */ + core_memres = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "core_mem"); + msm_host->core_mem = devm_ioremap(&pdev->dev, core_memres->start, + resource_size(core_memres)); + + if (!msm_host->core_mem) { + dev_err(&pdev->dev, "Failed to remap registers\n"); + ret = -ENOMEM; + goto vreg_deinit; + } + + /* Set SW_RST bit in POWER register (Offset 0x0) */ + writel_relaxed(CORE_SW_RST, msm_host->core_mem + CORE_POWER); + /* Set HC_MODE_EN bit in HC_MODE register */ + writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); + + /* + * Following are the deviations from SDHC spec v3.0 - + * 1. Card detection is handled using separate GPIO. + * 2. Bus power control is handled by interacting with PMIC. + */ + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + + /* Setup PWRCTL irq */ + msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq"); + if (msm_host->pwr_irq < 0) { + dev_err(&pdev->dev, "Failed to get pwr_irq by name (%d)\n", + msm_host->pwr_irq); + goto vreg_deinit; + } + ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL, + sdhci_msm_pwr_irq, IRQF_ONESHOT, + dev_name(&pdev->dev), host); + if (ret) { + dev_err(&pdev->dev, "Request threaded irq(%d) failed (%d)\n", + msm_host->pwr_irq, ret); + goto vreg_deinit; + } + + /* Enable pwr irq interrupts */ + writel_relaxed(INT_MASK, (msm_host->core_mem + CORE_PWRCTL_MASK)); + + /* Set host capabilities */ + msm_host->mmc->caps |= msm_host->pdata.caps; + msm_host->mmc->caps2 |= msm_host->pdata.caps2; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "Add host failed (%d)\n", ret); + goto vreg_deinit; + } + + /* Set core clk rate */ + ret = clk_set_rate(msm_host->clk, host->max_clk); + if (ret) { + dev_err(&pdev->dev, "MClk rate set failed (%d)\n", ret); + goto remove_host; + } + + host->mmc->max_current_180 = host->mmc->max_current_300 = + host->mmc->max_current_330 = sdhci_msm_get_vdd_max_current(msm_host); + + /* Successful initialization */ + goto out; + +remove_host: + dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); + sdhci_remove_host(host, dead); +vreg_deinit: + sdhci_msm_vreg_init(&pdev->dev, &msm_host->pdata, false); +clk_disable: + if (!IS_ERR(msm_host->clk)) + clk_disable_unprepare(msm_host->clk); +pclk_disable: + if (!IS_ERR(msm_host->pclk)) + clk_disable_unprepare(msm_host->pclk); +bus_clk_disable: + if (!IS_ERR_OR_NULL(msm_host->bus_clk)) + clk_disable_unprepare(msm_host->bus_clk); +pltfm_free: + sdhci_pltfm_free(pdev); +out: + return ret; +} + +static int sdhci_msm_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = pltfm_host->priv; + int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == + 0xffffffff); + + pr_debug("%s: %s\n", dev_name(&pdev->dev), __func__); + sdhci_remove_host(host, dead); + sdhci_pltfm_free(pdev); + sdhci_msm_vreg_init(&pdev->dev, &msm_host->pdata, false); + clk_disable_unprepare(msm_host->clk); + clk_disable_unprepare(msm_host->pclk); + if (!IS_ERR_OR_NULL(msm_host->bus_clk)) + clk_disable_unprepare(msm_host->bus_clk); + return 0; +} + +static struct platform_driver sdhci_msm_driver = { + .probe = sdhci_msm_probe, + .remove = sdhci_msm_remove, + .driver = { + .name = "sdhci_msm", + .owner = THIS_MODULE, + .of_match_table = sdhci_msm_dt_match, + }, +}; + +module_platform_driver(sdhci_msm_driver); + +MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver"); +MODULE_LICENSE("GPL v2");