From patchwork Wed Nov 6 15:56:44 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 3148201 Return-Path: X-Original-To: patchwork-linux-mmc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 470799F3C4 for ; Wed, 6 Nov 2013 16:03:35 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id BC0E620465 for ; Wed, 6 Nov 2013 16:03:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 0FEE22022F for ; Wed, 6 Nov 2013 16:03:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754923Ab3KFQDM (ORCPT ); Wed, 6 Nov 2013 11:03:12 -0500 Received: from ns.mm-sol.com ([37.157.136.199]:47231 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754982Ab3KFQDJ (ORCPT ); Wed, 6 Nov 2013 11:03:09 -0500 Received: from mms.int.mm-sol.com (unknown [172.18.0.3]) by extserv.mm-sol.com (Postfix) with ESMTPSA id BD9C5C6E1; Wed, 6 Nov 2013 17:56:08 +0200 (EET) From: Georgi Djakov To: linux-mmc@vger.kernel.org, cjb@laptop.org, devicetree@vger.kernel.org, grant.likely@linaro.org, rob.herring@calxeda.com, pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, rob@landley.net, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, subhashj@codeaurora.org, Georgi Djakov Subject: [PATCH v7 1/2] mmc: sdhci-msm: Initial SDHCI MSM driver documentation Date: Wed, 6 Nov 2013 17:56:44 +0200 Message-Id: <1383753405-23631-2-git-send-email-gdjakov@mm-sol.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1383753405-23631-1-git-send-email-gdjakov@mm-sol.com> References: <1383753405-23631-1-git-send-email-gdjakov@mm-sol.com> Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch adds documentation for Qualcomm SDHCI MSM driver. It contains the differences between the core properties in mmc.txt and the properties used by the sdhci-msm driver. Signed-off-by: Georgi Djakov --- .../devicetree/bindings/mmc/sdhci-msm.txt | 92 ++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt new file mode 100644 index 0000000..8f1a52d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -0,0 +1,92 @@ +* Qualcomm SDHCI controller (sdhci-msm) + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-msm driver. + +Required properties: +- compatible: should contain "qcom,sdhci-msm" +- reg: should contain SDHC, SD Core register map +- reg-names: indicates various resources passed to driver (via reg proptery) by name + "reg-names" examples are "hc_mem" and "core_mem" +- interrupts: should contain SDHC interrupts +- interrupt-names: indicates interrupts passed to driver (via interrupts property) by name + "interrupt-names" examples are "hc_irq" and "pwr_irq" +- vdd-supply: phandle to the regulator for the vdd (flash core voltage) supply. +- vddio-supply: phandle to the regulator for the vdd-io (i/o voltage) supply. +- pinctrl-names: Should contain only one value - "default". +- pinctrl-0: Should specify pin control groups used for this controller. +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names +- clock-names: Should contain the following: + "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) + "core" - SDC MMC clock (MCLK) (required) + "bus" - SDCC bus voter clock (optional) + +Optional properties: +- qcom,bus-speed-mode: specifies the supported bus speed modes by host + The supported bus speed modes are: + "HS200_1p8v" - indicates that host can support HS200 at 1.8v + "HS200_1p2v" - indicates that host can support HS200 at 1.2v + "DDR_1p8v" - indicates that host can support DDR mode at 1.8v + "DDR_1p2v" - indicates that host can support DDR mode at 1.2v + +- qcom,{vdd,vdd-io}-lpm-sup - specifies whether the supply can be kept in low power mode. +- qcom,{vdd,vdd-io}-voltage-level - specifies voltage levels for the supply. + Should be specified in pairs (min, max), units uV. +- qcom,{vdd,vdd-io}-current-level - specifies load levels for the supply in lpm + or high power mode (hpm). Should be specified in pairs (lpm, hpm), units uA. + +Example: + + aliases { + sdhc1 = &sdhc_1; + sdhc2 = &sdhc_2; + }; + + sdhc_1: qcom,sdhc@f9824900 { + compatible = "qcom,sdhci-msm"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <8>; + non-removable; + + vdd-supply = <&pm8941_l20>; + qcom,vdd-io-lpm-sup; + qcom,vdd-voltage-level = <2950000 2950000>; + qcom,vdd-current-level = <800 500000>; + + vdd-io-supply = <&pm8941_s3>; + qcom,vdd-io-voltage-level = <1800000 1800000>; + qcom,vdd-io-current-level = <250 154000>; + qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; + + pinctrl-names = "default" + pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "iface", "core"; + }; + + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,sdhci-msm"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <4>; + + vdd-supply = <&pm8941_l21>; + qcom,vdd-voltage-level = <2950000 2950000>; + qcom,vdd-current-level = <9000 800000>; + + vdd-io-supply = <&pm8941_l13>; + qcom,vdd-io-voltage-level = <1800000 2950000>; + qcom,vdd-io-current-level = <6 22000>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + };