diff mbox

[PATCHv3,3/3] mmc: dw_mmc-exynos: Remove Exynos' custom prepare_command function

Message ID 1386564668-24738-4-git-send-email-dinguyen@altera.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dinh Nguyen Dec. 9, 2013, 4:51 a.m. UTC 
From: Dinh Nguyen <dinguyen@altera.com>

The Exynos prepare_command function is only checking when to set the
SDMMC_CMD_USE_HOLD_REG bit. Now that there is a generic way to check
on when to set SDMMC_CMD_USE_HOLD_REG bit.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
---
v3: none
v2: none
---
 drivers/mmc/host/dw_mmc-exynos.c |   14 --------------
 1 file changed, 14 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 3423c5e..8ce24c8 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -167,19 +167,6 @@  static int dw_mci_exynos_resume_noirq(struct device *dev)
 #define dw_mci_exynos_resume_noirq	NULL
 #endif /* CONFIG_PM_SLEEP */
 
-static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
-	/*
-	 * Exynos4412 and Exynos5250 extends the use of CMD register with the
-	 * use of bit 29 (which is reserved on standard MSHC controllers) for
-	 * optionally bypassing the HOLD register for command and data. The
-	 * HOLD register should be bypassed in case there is no phase shift
-	 * applied on CMD/DATA that is sent to the card.
-	 */
-	if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
-		*cmdr |= SDMMC_CMD_USE_HOLD_REG;
-}
-
 static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 {
 	struct dw_mci_exynos_priv_data *priv = host->priv;
@@ -397,7 +384,6 @@  static const struct dw_mci_drv_data exynos_drv_data = {
 	.caps			= exynos_dwmmc_caps,
 	.init			= dw_mci_exynos_priv_init,
 	.setup_clock		= dw_mci_exynos_setup_clock,
-	.prepare_command	= dw_mci_exynos_prepare_command,
 	.set_ios		= dw_mci_exynos_set_ios,
 	.parse_dt		= dw_mci_exynos_parse_dt,
 	.execute_tuning		= dw_mci_exynos_execute_tuning,