| Message ID | 1386680168-5227-3-git-send-email-b29396@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Dec 10, 2013 at 08:56:04PM +0800, Dong Aisheng wrote: > The default sdhci code use the 1 << 27 as the max timeout counter to > to calculate the max_discard_to, however it's not correct for uSDHC > since its the max counter is 1 << 28. > Implement esdhc_get_max_timeout to handle it correctly. > > Signed-off-by: Dong Aisheng <b29396@freescale.com> > Reported-by: Ed Sutter <ed.sutter@alcatel-lucent.com> > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 10 ++++++++++ > 1 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index 461a4c3..97b35e1 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -859,6 +859,15 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) > return esdhc_change_pinstate(host, uhs); > } > > +unsigned int esdhc_get_max_timeout(struct sdhci_host *host) static? Shawn > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct pltfm_imx_data *imx_data = pltfm_host->priv; > + u32 max_to = esdhc_is_usdhc(imx_data) ? 1 << 28 : 1 << 27; > + > + return max_to / (esdhc_pltfm_get_max_clock(host) / 1000); > +} > + > static struct sdhci_ops sdhci_esdhc_ops = { > .read_l = esdhc_readl_le, > .read_w = esdhc_readw_le, > @@ -871,6 +880,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { > .get_ro = esdhc_pltfm_get_ro, > .platform_bus_width = esdhc_pltfm_bus_width, > .set_uhs_signaling = esdhc_set_uhs_signaling, > + .get_max_timeout = esdhc_get_max_timeout, > }; > > static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { > -- > 1.7.2.rc3 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 461a4c3..97b35e1 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -859,6 +859,15 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) return esdhc_change_pinstate(host, uhs); } +unsigned int esdhc_get_max_timeout(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + u32 max_to = esdhc_is_usdhc(imx_data) ? 1 << 28 : 1 << 27; + + return max_to / (esdhc_pltfm_get_max_clock(host) / 1000); +} + static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, @@ -871,6 +880,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { .get_ro = esdhc_pltfm_get_ro, .platform_bus_width = esdhc_pltfm_bus_width, .set_uhs_signaling = esdhc_set_uhs_signaling, + .get_max_timeout = esdhc_get_max_timeout, }; static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
The default sdhci code use the 1 << 27 as the max timeout counter to to calculate the max_discard_to, however it's not correct for uSDHC since its the max counter is 1 << 28. Implement esdhc_get_max_timeout to handle it correctly. Signed-off-by: Dong Aisheng <b29396@freescale.com> Reported-by: Ed Sutter <ed.sutter@alcatel-lucent.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)