diff mbox

[6/8] ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs

Message ID 1400771902-26553-7-git-send-email-peter.griffin@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Griffin May 22, 2014, 3:18 p.m. UTC
Because the first sdhci controller is present on both stih415 and
stih416 SoC which can both populate the b2020 board, it can be
enabled in the generic DT file.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
 arch/arm/boot/dts/stih41x-b2020x.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Lee Jones May 22, 2014, 3:41 p.m. UTC | #1
On Thu, 22 May 2014, Peter Griffin wrote:

> Because the first sdhci controller is present on both stih415 and
> stih416 SoC which can both populate the b2020 board, it can be
> enabled in the generic DT file.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>

These are the wrong way around.

You can correct that when adding my:

  Acked-by: Lee Jones <lee.jones@linaro.org>

> ---
>  arch/arm/boot/dts/stih41x-b2020x.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi
> index df01c12..f797a06 100644
> --- a/arch/arm/boot/dts/stih41x-b2020x.dtsi
> +++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi
> @@ -8,6 +8,10 @@
>   */
>  / {
>  	soc {
> +		mmc0: sdhci@fe81e000 {
> +			status = "okay";
> +		};
> +
>  		spifsm: spifsm@fe902000 {
>  			#address-cells = <1>;
>  			#size-cells    = <1>;
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi
index df01c12..f797a06 100644
--- a/arch/arm/boot/dts/stih41x-b2020x.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi
@@ -8,6 +8,10 @@ 
  */
 / {
 	soc {
+		mmc0: sdhci@fe81e000 {
+			status = "okay";
+		};
+
 		spifsm: spifsm@fe902000 {
 			#address-cells = <1>;
 			#size-cells    = <1>;