@@ -47,6 +47,8 @@ Required properties:
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
"allwinner,sun4i-a10-mbus-clk" - for the MBUS clock on A10
+ "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10
+ "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
"allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
@@ -16,6 +16,7 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
+#include <linux/of_address.h>
#include "clk-factors.h"
@@ -92,3 +93,191 @@ static void __init sun4i_a10_mbus_setup(struct device_node *node)
clk_prepare_enable(mbus);
}
CLK_OF_DECLARE(sun4i_a10_mbus, "allwinner,sun4i-a10-mbus-clk", sun4i_a10_mbus_setup);
+
+struct mmc_phase_data {
+ u8 offset;
+};
+
+struct mmc_phase {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct mmc_phase_data *data;
+ spinlock_t *lock;
+};
+
+#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw)
+
+static int mmc_get_phase(struct clk_hw *hw)
+{
+ struct clk *mmc, *mmc_parent, *clk = hw->clk;
+ struct mmc_phase *phase = to_mmc_phase(hw);
+ unsigned int mmc_rate, mmc_parent_rate;
+ u16 step, mmc_div;
+ u32 value;
+ u8 delay;
+
+ value = readl(phase->reg);
+ delay = (value >> phase->data->offset) & 0x3;
+
+ if (!delay)
+ return 180;
+
+ /* Get the main MMC clock */
+ mmc = clk_get_parent(clk);
+ if (!mmc)
+ return -EINVAL;
+
+ /* And its rate */
+ mmc_rate = clk_get_rate(mmc);
+ if (!mmc_rate)
+ return -EINVAL;
+
+ /* Now, get the MMC parent (most likely some PLL) */
+ mmc_parent = clk_get_parent(mmc);
+ if (!mmc_parent)
+ return -EINVAL;
+
+ /* And its rate */
+ mmc_parent_rate = clk_get_rate(mmc_parent);
+ if (!mmc_parent_rate)
+ return -EINVAL;
+
+ /* Get MMC clock divider */
+ mmc_div = mmc_parent_rate / mmc_rate;
+
+ step = DIV_ROUND_CLOSEST(360, mmc_div);
+ return delay * step;
+}
+
+static int mmc_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct clk *mmc, *mmc_parent, *clk = hw->clk;
+ struct mmc_phase *phase = to_mmc_phase(hw);
+ unsigned int mmc_rate, mmc_parent_rate;
+ unsigned long flags;
+ u32 value;
+ u8 delay;
+
+ /* Get the main MMC clock */
+ mmc = clk_get_parent(clk);
+ if (!mmc)
+ return -EINVAL;
+
+ /* And its rate */
+ mmc_rate = clk_get_rate(mmc);
+ if (!mmc_rate)
+ return -EINVAL;
+
+ /* Now, get the MMC parent (most likely some PLL) */
+ mmc_parent = clk_get_parent(mmc);
+ if (!mmc_parent)
+ return -EINVAL;
+
+ /* And its rate */
+ mmc_parent_rate = clk_get_rate(mmc_parent);
+ if (!mmc_parent_rate)
+ return -EINVAL;
+
+ if (degrees != 180) {
+ u16 step, mmc_div;
+
+ /* Get MMC clock divider */
+ mmc_div = mmc_parent_rate / mmc_rate;
+
+ /*
+ * We can only outphase the clocks by multiple of the
+ * PLL's period.
+ *
+ * Since the MMC clock in only a divider, and the
+ * formula to get the outphasing in degrees is deg =
+ * 360 * delta / period
+ *
+ * If we simplify this formula, we can see that the
+ * only thing that we're concerned about is the number
+ * of period we want to outphase our clock from, and
+ * the divider set by the MMC clock.
+ */
+ step = DIV_ROUND_CLOSEST(360, mmc_div);
+ delay = DIV_ROUND_CLOSEST(degrees, step);
+ } else {
+ delay = 0;
+ }
+
+ spin_lock_irqsave(phase->lock, flags);
+ value = readl(phase->reg);
+ value &= ~GENMASK(phase->data->offset + 3, phase->data->offset);
+ value |= delay << phase->data->offset;
+ writel(value, phase->reg);
+ spin_unlock_irqrestore(phase->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops mmc_clk_ops = {
+ .get_phase = mmc_get_phase,
+ .set_phase = mmc_set_phase,
+};
+
+static void __init sun4i_a10_mmc_phase_setup(struct device_node *node,
+ struct mmc_phase_data *data)
+{
+ const char *parent_names[1] = { of_clk_get_parent_name(node, 0) };
+ struct clk_init_data init = {
+ .num_parents = 1,
+ .parent_names = parent_names,
+ .ops = &mmc_clk_ops,
+ };
+
+ struct mmc_phase *phase;
+ struct clk *clk;
+
+ phase = kmalloc(sizeof(*phase), GFP_KERNEL);
+ if (!phase)
+ return;
+
+ phase->hw.init = &init;
+
+ phase->reg = of_iomap(node, 0);
+ if (!phase->reg)
+ goto err_free;
+
+ phase->data = data;
+ phase->lock = &sun4i_a10_mod0_lock;
+
+ if (of_property_read_string(node, "clock-output-names", &init.name))
+ init.name = node->name;
+
+ clk = clk_register(NULL, &phase->hw);
+ if (IS_ERR(clk))
+ goto err_unmap;
+
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+ return;
+
+err_unmap:
+ iounmap(phase->reg);
+err_free:
+ kfree(phase);
+}
+
+
+static struct mmc_phase_data mmc_output_clk = {
+ .offset = 8,
+};
+
+static struct mmc_phase_data mmc_sample_clk = {
+ .offset = 20,
+};
+
+static void __init sun4i_a10_mmc_output_setup(struct device_node *node)
+{
+ sun4i_a10_mmc_phase_setup(node, &mmc_output_clk);
+}
+CLK_OF_DECLARE(sun4i_a10_mmc_output, "allwinner,sun4i-a10-mmc-output-clk", sun4i_a10_mmc_output_setup);
+
+static void __init sun4i_a10_mmc_sample_setup(struct device_node *node)
+{
+ sun4i_a10_mmc_phase_setup(node, &mmc_sample_clk);
+}
+CLK_OF_DECLARE(sun4i_a10_mmc_sample, "allwinner,sun4i-a10-mmc-sample-clk", sun4i_a10_mmc_sample_setup);
The MMC clock we thought we had until now are actually not one but three different clocks. The main one is unchanged, and will have three outputs: - The clock fed into the MMC - a sample and output clocks, to deal with when should we output/sample data to/from the MMC bus The phase control we had are actually controlling the two latter clocks, but the main MMC one is unchanged. We can adjust the phase with a 3 bits value, from 0 to 7, 0 meaning a 180 phase shift, and the other values being the number of periods from the MMC parent clock to outphase the clock of. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- Documentation/devicetree/bindings/clock/sunxi.txt | 2 + drivers/clk/sunxi/clk-mod0.c | 189 ++++++++++++++++++++++ 2 files changed, 191 insertions(+)