@@ -7,7 +7,7 @@ obj-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
-obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+obj-$(CONFIG_MMC_SDHCI) += sdhci.o sdhci-uhs2.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-o2micro.o
@@ -255,6 +255,12 @@ static void sdhci_pci_int_hw_reset(struct sdhci_host *host)
{
u8 reg;
+ /* Since SDHC 4.0, bit 4 of is used to enable VDD2 for
+ * UHS2.
+ */
+ if (host->version >= SDHCI_SPEC_400)
+ return;
+
reg = sdhci_readb(host, SDHCI_POWER_CONTROL);
reg |= 0x10;
sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
new file mode 100644
@@ -0,0 +1,703 @@
+/*
+ * linux/drivers/mmc/host/sdhci_uhs2.c - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/mmc/mmc.h>
+
+#include "sdhci.h"
+#include "sdhci-uhs2.h"
+
+#define DRIVER_NAME "sdhci_uhs2"
+#define DBG(f, x...) \
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x)
+
+static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+ ier &= ~clear;
+ ier |= set;
+ sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear,
+ u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS_EN);
+ ier &= ~clear;
+ ier |= set;
+ sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_STATUS_EN);
+ sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_SIG_EN);
+}
+
+void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
+{
+ unsigned long timeout;
+ u32 uninitialized_var(ier);
+ u32 uninitialized_var(ier2);
+
+ if (!(host->mmc->caps & MMC_CAP_UHS2))
+ return;
+
+ sdhci_writew(host, mask, SDHCI_UHS2_SW_RESET);
+
+ if (mask & SDHCI_UHS2_SW_RESET_FULL) {
+ host->clock = 0;
+ /* Reset-all turns off SD Bus Power */
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
+ }
+
+ /* Wait max 100 ms */
+ timeout = 10000;
+
+ /* hw clears the bit when it's done */
+ while (sdhci_readw(host, SDHCI_UHS2_SW_RESET) & mask) {
+ if (timeout == 0) {
+ pr_err("%s: Reset 0x%x never completed.\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ udelay(10);
+ }
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
+
+static u8 sdhci_calc_timeout_uhs2(struct sdhci_host *host,
+ u8 *cmd_res,
+ u8 *dead_lock)
+{
+ u8 count;
+ unsigned cmd_res_timeout, dead_lock_timeout, current_timeout;
+
+ /*
+ * If the host controller provides us with an incorrect timeout
+ * value, just skip the check and use 0xE. The hardware may take
+ * longer to time out, but that's much better than having a too-short
+ * timeout value.
+ */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) {
+ *cmd_res = 0xE;
+ *dead_lock = 0xE;
+ return 0xE;
+ }
+
+ /* timeout in us */
+ cmd_res_timeout = 5 * 1000;
+ dead_lock_timeout = 1 * 1000 * 1000;
+
+ /*
+ * Figure out needed cycles.
+ * We do this in steps in order to fit inside a 32 bit int.
+ * The first step is the minimum timeout, which will have a
+ * minimum resolution of 6 bits:
+ * (1) 2^13*1000 > 2^22,
+ * (2) host->timeout_clk < 2^16
+ * =>
+ * (1) / (2) > 2^6
+ */
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < cmd_res_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ DBG("%s: Too large timeout 0x%x requested for CMD_RES!\n",
+ mmc_hostname(host->mmc), count);
+ count = 0xE;
+ }
+ *cmd_res = count;
+
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < dead_lock_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ DBG("%s: Too large timeout 0x%x requested for DEADLOCK!\n",
+ mmc_hostname(host->mmc), count);
+ count = 0xE;
+ }
+ *dead_lock = count;
+
+ return count;
+}
+
+void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ u16 mode;
+ struct mmc_data *data = cmd->data;
+
+ if (data == NULL) {
+ /* clear Auto CMD settings for no data CMDs */
+ mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE);
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ mode |= SDHCI_UHS2_TRNS_WAIT_EBSY;
+#ifdef CONFIG_MMC_DEBUG
+ DBG("UHS2 no data trans mode is 0x%x.\n", mode);
+#endif
+ sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
+ return;
+ }
+
+ WARN_ON(!host->data);
+
+ mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY;
+ if (data->flags & MMC_DATA_WRITE)
+ mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT;
+
+ if (data->blocks == 1 &&
+ cmd->opcode != MMC_READ_SINGLE_BLOCK &&
+ cmd->opcode != MMC_WRITE_BLOCK) {
+ mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN;
+ mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE;
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ mode |= SDHCI_UHS2_TRNS_DMA;
+
+ if (host->mmc->flags & MMC_UHS2_2L_HD)
+ mode |= SDHCI_UHS2_TRNS_2L_HD;
+
+ sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
+
+#ifdef CONFIG_MMC_DEBUG
+ DBG("UHS2 trans mode is 0x%x.\n", mode);
+#endif
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_set_transfer_mode);
+
+void sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int i, j;
+ int cmd_reg;
+
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ if (cmd->uhs2_cmd == NULL) {
+ pr_err("%s: fatal error, no uhs2_cmd!\n",
+ mmc_hostname(host->mmc));
+ BUG();
+ return;
+ }
+ }
+
+ for (i = 0; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i++)
+ sdhci_writeb(host, 0, SDHCI_UHS2_CMD_PACKET);
+
+ i = 0;
+ sdhci_writeb(host, cmd->uhs2_cmd->header,
+ SDHCI_UHS2_CMD_PACKET + i++);
+ sdhci_writeb(host, (cmd->uhs2_cmd->header >> 8) & 0xFF,
+ SDHCI_UHS2_CMD_PACKET + i++);
+ sdhci_writeb(host, cmd->uhs2_cmd->arg,
+ SDHCI_UHS2_CMD_PACKET + i++);
+ sdhci_writeb(host, (cmd->uhs2_cmd->arg >> 8) & 0xFF,
+ SDHCI_UHS2_CMD_PACKET + i++);
+
+ /* TODO: Per spec, playload (config) should be MSB before sending out.
+ * But we don't need convert here because I will set payload as
+ * MSB when preparing config read/write commands.
+ */
+ for (j = 0; j < cmd->uhs2_cmd->payload_len/sizeof(u32); j++) {
+ sdhci_writeb(host,
+ (*(cmd->uhs2_cmd->payload + j) & 0xFF),
+ SDHCI_UHS2_CMD_PACKET + i++);
+ sdhci_writeb(host,
+ ((*(cmd->uhs2_cmd->payload + j)) >> 8) & 0xFF,
+ SDHCI_UHS2_CMD_PACKET + i++);
+ sdhci_writeb(host,
+ ((*(cmd->uhs2_cmd->payload + j)) >> 16) & 0xFF,
+ SDHCI_UHS2_CMD_PACKET + i++);
+ sdhci_writeb(host,
+ ((*(cmd->uhs2_cmd->payload + j)) >> 24) & 0xFF,
+ SDHCI_UHS2_CMD_PACKET + i++);
+ }
+
+#ifdef CONFIG_MMC_DEBUG
+ DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len);
+ for (i = 0; i < cmd->uhs2_cmd->packet_len; i++)
+ DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i,
+ sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i));
+#endif
+
+ cmd_reg = cmd->uhs2_cmd->packet_len <<
+ SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT;
+ if (cmd->flags & MMC_CMD_ADTC)
+ cmd_reg |= SDHCI_UHS2_COMMAND_DATA;
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmd_reg |= SDHCI_UHS2_COMMAND_CMD12;
+
+ /* UHS2 Native ABORT */
+ if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
+ ((((cmd->uhs2_cmd->arg & 0xF) << 8) |
+ ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT))
+ cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT;
+
+ /* UHS2 Native DORMANT */
+ if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
+ ((((cmd->uhs2_cmd->arg & 0xF) << 8) |
+ ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) ==
+ UHS2_DEV_CMD_GO_DORMANT_STATE))
+ cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT;
+
+ DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg);
+ sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_send_command);
+
+void sdhci_uhs2_finish_command(struct sdhci_host *host)
+{
+ int i;
+ u8 resp;
+
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2);
+ if (resp & UHS2_RES_NACK_MASK)
+ pr_err("%s: NACK is got, ECODE=0x%x.\n",
+ mmc_hostname(host->mmc),
+ resp & UHS2_RES_ECODE_MASK);
+ }
+
+ if (host->cmd->uhs2_resp &&
+ host->cmd->uhs2_resp_len &&
+ host->cmd->uhs2_resp_len <= 20)
+ /* Get whole response of some native CCMD, like
+ * DEVICE_INIT, ENUMERATE.
+ */
+ for (i = 0; i < host->cmd->uhs2_resp_len; i++)
+ host->cmd->uhs2_resp[i] = sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i);
+ else
+ /* Get SD CMD response and Payload for some read
+ * CCMD, like INQUIRY_CFG.
+ */
+ /* Per spec (p136), payload field is divided into
+ * a unit of DWORD and transmission order within
+ * a DWORD is big endian.
+ */
+ for (i = 4; i < 20; i += 4)
+ host->cmd->resp[i/4-1] = (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i) << 24) |
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 1) << 16) |
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 2) << 8) |
+ sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 3);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_finish_command);
+
+void sdhci_uhs2_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ u8 cmd_res, dead_lock;
+ u16 ctrl_2;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ /* Preset register: no need to handle */
+ /* Asynchronous interrupt enable */
+ /* TODO: as async interrupt is same as SDHC 3.0
+ * I think we don't need handle it here.
+ */
+
+ /* UHS2 Timeout Control */
+ sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
+ cmd_res |= dead_lock << SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT;
+ sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
+
+ /* UHS2 timing */
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (ios->timing == MMC_TIMING_UHS2)
+ ctrl_2 |= SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN;
+ else
+ ctrl_2 &= ~(SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN);
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+
+ if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
+ sdhci_enable_preset_value(host, true);
+
+ /* Set VDD2 */
+ sdhci_set_power(host, ios->power_mode, ios->vdd, ios->vdd2);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_do_set_ios);
+
+static int sdhci_uhs2_interface_detect(struct sdhci_host *host)
+{
+ int timeout = 20;
+
+ while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_UHS2_IF_DETECT)) {
+ if (timeout == 0) {
+ pr_warn("%s: not detect UHS2 interface in 200us.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ timeout--;
+ udelay(10);
+ }
+
+ /* Enable UHS2 error interrupts */
+ sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
+ SDHCI_UHS2_ERR_INT_STATUS_MASK);
+
+ timeout = 150;
+ while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_UHS2_LANE_SYNC)) {
+ if (timeout == 0) {
+ pr_warn("%s: UHS2 Lane sync fail in 150ms.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ DBG("%s: UHS2 Lane synchronized in UHS2 mode, PHY is initializaed.\n",
+ mmc_hostname(host->mmc));
+ return 0;
+}
+
+static int sdhci_uhs2_init(struct sdhci_host *host)
+{
+ u16 caps_ptr = 0;
+ u32 caps_gen = 0;
+ u32 caps_phy = 0;
+ u32 caps_tran[2] = {0, 0};
+ struct mmc_host *mmc = host->mmc;
+
+ /* TODO: may add corresponding members in sdhci_host to
+ * keep these caps.
+ */
+ caps_ptr = sdhci_readw(host, SDHCI_UHS2_HOST_CAPS_PTR);
+ if (caps_ptr < 0x100 || caps_ptr > 0x1FF) {
+ pr_err("%s: SDHCI_UHS2_HOST_CAPS_PTR(%d) is wrong.\n",
+ mmc_hostname(mmc), caps_ptr);
+ return -ENODEV;
+ }
+ caps_gen = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_GEN_OFFSET);
+ caps_phy = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_PHY_OFFSET);
+ caps_tran[0] = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET);
+ caps_tran[1] = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET);
+
+ /* Geneneral Caps */
+ mmc->uhs2_caps.dap = caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK;
+ mmc->uhs2_caps.gap = caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK;
+ mmc->uhs2_caps.n_lanes = (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT;
+ mmc->uhs2_caps.addr64 =
+ (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64) ? 1 : 0;
+ mmc->uhs2_caps.card_type =
+ (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK) >>
+ SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT;
+
+ /* PHY Caps */
+ mmc->uhs2_caps.phy_rev = caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK;
+ mmc->uhs2_caps.speed_range =
+ (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT;
+ mmc->uhs2_caps.n_lss_sync =
+ (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT;
+ mmc->uhs2_caps.n_lss_dir =
+ (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT;
+ if (mmc->uhs2_caps.n_lss_sync == 0)
+ mmc->uhs2_caps.n_lss_sync = 16 << 2;
+ else
+ mmc->uhs2_caps.n_lss_sync <<= 2;
+ if (mmc->uhs2_caps.n_lss_dir == 0)
+ mmc->uhs2_caps.n_lss_dir = 16 << 3;
+ else
+ mmc->uhs2_caps.n_lss_dir <<= 3;
+
+ /* LINK/TRAN Caps */
+ mmc->uhs2_caps.link_rev =
+ caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK;
+ mmc->uhs2_caps.n_fcu =
+ (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT;
+ if (mmc->uhs2_caps.n_fcu == 0)
+ mmc->uhs2_caps.n_fcu = 256;
+ mmc->uhs2_caps.host_type =
+ (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT;
+ mmc->uhs2_caps.maxblk_len =
+ (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT;
+ mmc->uhs2_caps.n_data_gap =
+ caps_tran[1] & SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK;
+
+ return 0;
+}
+
+int sdhci_uhs2_do_detect_init(struct sdhci_host *host)
+{
+ unsigned long flags;
+ int ret = -EIO;
+
+ DBG("%s: begin UHS2 init.\n", __func__);
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (sdhci_uhs2_interface_detect(host)) {
+ pr_warn("%s: cannot detect UHS2 interface.\n",
+ mmc_hostname(host->mmc));
+ goto out;
+ }
+
+ if (sdhci_uhs2_init(host)) {
+ pr_warn("%s: UHS2 init fail.\n",
+ mmc_hostname(host->mmc));
+ goto out;
+ }
+
+ /* TODO: is this necessary? */
+ /* Init complete, do soft reset and enable UHS2 error irqs. */
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
+ sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
+ SDHCI_UHS2_ERR_INT_STATUS_MASK);
+
+ ret = 0;
+out:
+ /* TODO: do some clear work here? */
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_do_detect_init);
+
+static void sdhci_uhs2_set_config(struct sdhci_host *host)
+{
+ u32 value;
+
+ /* Set Gen Settings */
+ sdhci_writel(host, host->mmc->uhs2_caps.n_lanes_set <<
+ SDHCI_UHS2_GEN_SET_N_LANES_POS, SDHCI_UHS2_GEN_SET);
+
+ /* Set PHY Settings */
+ value = (host->mmc->uhs2_caps.n_lss_dir_set <<
+ SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS) |
+ (host->mmc->uhs2_caps.n_lss_sync_set <<
+ SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS);
+ if (host->mmc->flags & MMC_UHS2_SPEED_B)
+ value |= 1 << SDHCI_UHS2_PHY_SET_SPEED_POS;
+ sdhci_writel(host, value, SDHCI_UHS2_PHY_SET);
+
+ /* Set LINK-TRAN Settings */
+ value = (host->mmc->uhs2_caps.max_retry_set <<
+ SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS) |
+ (host->mmc->uhs2_caps.n_fcu_set <<
+ SDHCI_UHS2_TRAN_SET_N_FCU_POS);
+ sdhci_writel(host, value, SDHCI_UHS2_TRAN_SET);
+ sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set,
+ SDHCI_UHS2_TRAN_SET_1);
+}
+
+static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
+{
+ int timeout = 100;
+
+ while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_UHS2_IN_DORMANT_STATE)) {
+ if (timeout == 0) {
+ pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ timeout--;
+ mdelay(1);
+ }
+ return 0;
+}
+
+int sdhci_uhs2_do_set_reg(struct sdhci_host *host, enum uhs2_act act)
+{
+ unsigned long flags;
+ int err = 0;
+
+ DBG("Begin sdhci_uhs2_set_reg, act %d.\n", act);
+ spin_lock_irqsave(&host->lock, flags);
+
+ switch (act) {
+ case SET_CONFIG:
+ sdhci_uhs2_set_config(host);
+ break;
+ case ENABLE_INT:
+ sdhci_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
+ break;
+ case DISABLE_INT:
+ sdhci_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
+ break;
+ case SET_SPEED_B:
+ sdhci_writel(host, 1 << SDHCI_UHS2_PHY_SET_SPEED_POS,
+ SDHCI_UHS2_PHY_SET);
+ break;
+ case CHECK_DORMANT:
+ err = sdhci_uhs2_check_dormant(host);
+ break;
+ default:
+ pr_err("%s: input action %d is wrong!\n",
+ mmc_hostname(host->mmc), act);
+ err = -EIO;
+ break;
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+ return err;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_do_set_reg);
+
+void sdhci_uhs2_irq(struct sdhci_host *host)
+{
+ u32 uhs2mask;
+
+ uhs2mask = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS);
+ DBG("*** %s got UHS2 interrupt: 0x%08x\n",
+ mmc_hostname(host->mmc), uhs2mask);
+
+ sdhci_writel(host, uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK,
+ SDHCI_UHS2_ERR_INT_STATUS);
+
+ if (!(uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK))
+ return;
+
+ if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK) {
+ host->cmd->error = -EILSEQ;
+ if (uhs2mask &
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT)
+ host->cmd->error = -ETIMEDOUT;
+ } else if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK) {
+ if (!host->data) {
+ pr_err("%s: Got data interrupt 0x%08x even "
+ "though no data operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)uhs2mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+
+ if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT)
+ host->data->error = -ETIMEDOUT;
+ else if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_ADMA) {
+ pr_err("%s: ADMA error = 0x %x\n",
+ mmc_hostname(host->mmc),
+ sdhci_readb(host, SDHCI_ADMA_ERROR));
+ host->data->error = -EIO;
+ } else
+ host->data->error = -EILSEQ;
+ } else
+ /* TODO: not sure if this is required. */
+ host->cmd->error = -EILSEQ;
+
+ /* TODO: per spec, below codes should be executed when data error
+ * found. But the codes will be executed in sdhci_tasklet_finish()
+ * finally. So remove them first.
+ */
+#if 0
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED)
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
+#endif
+
+ if (host->data->error)
+ sdhci_finish_data(host);
+ else
+ tasklet_schedule(&host->finish_tasklet);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_irq);
+
+int sdhci_uhs2_add_host(struct sdhci_host *host, u32 caps1)
+{
+ struct mmc_host *mmc;
+ u32 max_current_caps2;
+
+ if (host->version < SDHCI_SPEC_400)
+ return 0;
+
+ mmc = host->mmc;
+
+ /* Support UHS2 */
+ if (caps1 & SDHCI_SUPPORT_UHS2) {
+ mmc->caps |= MMC_CAP_UHS2;
+ mmc->flags |= MMC_UHS2_SUPPORT;
+ }
+
+ max_current_caps2 = sdhci_readl(host, SDHCI_MAX_CURRENT_1);
+ if (!max_current_caps2 && !IS_ERR(mmc->supply.vmmc2)) {
+ /* TODO: UHS2 - VDD2 */
+ int curr = regulator_get_current_limit(mmc->supply.vmmc2);
+
+ if (curr > 0) {
+ /* convert to SDHCI_MAX_CURRENT format */
+ curr = curr/1000; /* convert to mA */
+ curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
+ curr = min_t(u32, curr,
+ SDHCI_MAX_CURRENT_LIMIT);
+ max_current_caps2 = curr;
+ }
+ }
+
+ if (caps1 & SDHCI_SUPPORT_VDD2_180) {
+ mmc->ocr_avail_uhs2 |= MMC_VDD2_165_195;
+ /* UHS2 doesn't require this. Only UHS-I bus needs to set
+ * max current.
+ */
+ mmc->max_current_180_vdd2 = (max_current_caps2 &
+ SDHCI_MAX_CURRENT_VDD2_180_MASK) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+ } else { /* TODO: shall I? */
+ mmc->caps &= ~MMC_CAP_UHS2;
+ mmc->flags &= ~MMC_UHS2_SUPPORT;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_add_host);
+
+void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead)
+{
+ if (!(host->mmc) || !(host->mmc->flags & MMC_UHS2_SUPPORT))
+ return;
+
+ if (!dead) {
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_FULL);
+ }
+
+ sdhci_writel(host, 0, SDHCI_UHS2_ERR_INT_STATUS_EN);
+ sdhci_writel(host, 0, SDHCI_UHS2_ERR_INT_SIG_EN);
+ host->mmc->flags &= ~MMC_UHS2_SUPPORT;
+ host->mmc->flags &= ~MMC_UHS2_INITIALIZED;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_remove_host);
new file mode 100644
@@ -0,0 +1,36 @@
+/*
+ * linux/drivers/mmc/host/sdhci-uhs2.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Header file for Host Controller UHS2 related registers and I/O accessors.
+ *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef __SDHCI_UHS2_H
+#define __SDHCI_UHS2_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/sdhci.h>
+#include <linux/mmc/uhs2.h>
+
+extern void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
+extern void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_command *cmd);
+extern void sdhci_uhs2_send_command(struct sdhci_host *host,
+ struct mmc_command *cmd);
+extern void sdhci_uhs2_finish_command(struct sdhci_host *host);
+extern void sdhci_uhs2_do_set_ios(struct sdhci_host *host,
+ struct mmc_ios *ios);
+extern int sdhci_uhs2_do_detect_init(struct sdhci_host *host);
+extern int sdhci_uhs2_do_set_reg(struct sdhci_host *host, enum uhs2_act act);
+extern void sdhci_uhs2_irq(struct sdhci_host *host);
+extern int sdhci_uhs2_add_host(struct sdhci_host *host, u32 caps1);
+extern void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead);
+
+#endif /* __SDHCI_UHS2_H */
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
*
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,8 +30,10 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/slot-gpio.h>
+#include <linux/mmc/uhs2.h>
#include "sdhci.h"
+#include "sdhci-uhs2.h"
#define DRIVER_NAME "sdhci"
@@ -47,18 +50,14 @@
static unsigned int debug_quirks = 0;
static unsigned int debug_quirks2;
-static void sdhci_finish_data(struct sdhci_host *);
-
static void sdhci_finish_command(struct sdhci_host *);
static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
static void sdhci_tuning_timer(unsigned long data);
-static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
#ifdef CONFIG_PM
static int sdhci_runtime_pm_get(struct sdhci_host *host);
static int sdhci_runtime_pm_put(struct sdhci_host *host);
static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
-static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
#else
static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
{
@@ -71,12 +70,13 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
{
}
-static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
{
}
+EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_off);
#endif
-static void sdhci_dumpregs(struct sdhci_host *host)
+void sdhci_dumpregs(struct sdhci_host *host)
{
pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
mmc_hostname(host->mmc));
@@ -84,12 +84,21 @@ static void sdhci_dumpregs(struct sdhci_host *host)
pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
sdhci_readl(host, SDHCI_DMA_ADDRESS),
sdhci_readw(host, SDHCI_HOST_VERSION));
- pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
- sdhci_readw(host, SDHCI_BLOCK_SIZE),
- sdhci_readw(host, SDHCI_BLOCK_COUNT));
- pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
- sdhci_readl(host, SDHCI_ARGUMENT),
- sdhci_readw(host, SDHCI_TRANSFER_MODE));
+ if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT) {
+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_UHS2_BLOCK_SIZE),
+ sdhci_readl(host, SDHCI_UHS2_BLOCK_COUNT));
+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_UHS2_TRANS_MODE));
+ } else {
+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_BLOCK_SIZE),
+ sdhci_readw(host, SDHCI_BLOCK_COUNT));
+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_TRANSFER_MODE));
+ }
pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
sdhci_readl(host, SDHCI_PRESENT_STATE),
sdhci_readb(host, SDHCI_HOST_CONTROL));
@@ -111,12 +120,21 @@ static void sdhci_dumpregs(struct sdhci_host *host)
pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
sdhci_readl(host, SDHCI_CAPABILITIES),
sdhci_readl(host, SDHCI_CAPABILITIES_1));
- pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
- sdhci_readw(host, SDHCI_COMMAND),
- sdhci_readl(host, SDHCI_MAX_CURRENT));
+ if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT)
+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ sdhci_readw(host, SDHCI_UHS2_COMMAND),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
+ else
+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ sdhci_readw(host, SDHCI_COMMAND),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_CONTROL2));
+ if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT)
+ pr_debug(DRIVER_NAME ": UHS2 Err INT: 0x%08x\n",
+ sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS));
+
if (host->flags & SDHCI_USE_ADMA) {
if (host->flags & SDHCI_USE_64_BIT_DMA)
pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
@@ -131,6 +149,7 @@ static void sdhci_dumpregs(struct sdhci_host *host)
pr_debug(DRIVER_NAME ": ===========================================\n");
}
+EXPORT_SYMBOL_GPL(sdhci_dumpregs);
/*****************************************************************************\
* *
@@ -914,6 +933,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
u16 mode;
struct mmc_data *data = cmd->data;
+ if (host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_set_transfer_mode(host, cmd);
+ return;
+ }
+
if (data == NULL) {
if (host->quirks2 &
SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
@@ -952,7 +976,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
}
-static void sdhci_finish_data(struct sdhci_host *host)
+void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
@@ -983,6 +1007,14 @@ static void sdhci_finish_data(struct sdhci_host *host)
else
data->bytes_xfered = data->blksz * data->blocks;
+ /* TODO: shall we send CMD12 or ABORT packet to device for error case?
+ */
+ if (host->mmc->flags & MMC_UHS2_SUPPORT) {
+ DBG("UHS2: End data transferring...\n");
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
/*
* Need to send CMD12 if -
* a) open-ended multiblock transfer (no CMD23)
@@ -1005,6 +1037,7 @@ static void sdhci_finish_data(struct sdhci_host *host)
} else
tasklet_schedule(&host->finish_tasklet);
}
+EXPORT_SYMBOL_GPL(sdhci_finish_data);
void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
@@ -1051,8 +1084,6 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_prepare_data(host, cmd);
- sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
-
sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
@@ -1082,6 +1113,13 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
flags |= SDHCI_CMD_DATA;
+ if (host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_send_command(host, cmd);
+ return;
+ }
+
+ sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
+
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
}
EXPORT_SYMBOL_GPL(sdhci_send_command);
@@ -1092,7 +1130,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
BUG_ON(host->cmd == NULL);
- if (host->cmd->flags & MMC_RSP_PRESENT) {
+ if (host->mmc->flags & MMC_UHS2_SUPPORT)
+ sdhci_uhs2_finish_command(host);
+ else if (host->cmd->flags & MMC_RSP_PRESENT) {
if (host->cmd->flags & MMC_RSP_136) {
/* CRC is stripped so we need to do some shifting. */
for (i = 0;i < 4;i++) {
@@ -1151,6 +1191,9 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
case MMC_TIMING_MMC_HS400:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
break;
+ case MMC_TIMING_UHS2:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
+ break;
default:
pr_warn("%s: Invalid UHS-I mode selected\n",
mmc_hostname(host->mmc));
@@ -1160,12 +1203,32 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
return preset;
}
+static bool sdhci_wait_clock_stable(struct sdhci_host *host)
+{
+ u16 clk = 0;
+ unsigned long timeout;
+
+ /* Wait max 20 ms */
+ timeout = 2000;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return false;
+ }
+ timeout--;
+ udelay(10);
+ }
+ return true;
+}
+
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
int div = 0; /* Initialized for compiler warning */
int real_div = div, clk_mul = 1;
u16 clk = 0;
- unsigned long timeout;
host->mmc->actual_clock = 0;
@@ -1244,18 +1307,21 @@ clock_set:
clk |= SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
- /* Wait max 20 ms */
- timeout = 20;
- while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
- & SDHCI_CLOCK_INT_STABLE)) {
- if (timeout == 0) {
- pr_err("%s: Internal clock never "
- "stabilised.\n", mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
+ if (false == sdhci_wait_clock_stable(host)) {
+ pr_err("%s: clock failed to be stable.\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+
+ if (host->version >= SDHCI_SPEC_400 &&
+ sdhci_readw(host, SDHCI_HOST_CONTROL2) & SDHCI_CTRL_HOST_4_EN) {
+ clk |= SDHCI_PLL_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ if (false == sdhci_wait_clock_stable(host)) {
+ pr_err("%s: clock failed to be stable.\n",
+ mmc_hostname(host->mmc));
return;
}
- timeout--;
- mdelay(1);
}
clk |= SDHCI_CLOCK_CARD_EN;
@@ -1263,8 +1329,8 @@ clock_set:
}
EXPORT_SYMBOL_GPL(sdhci_set_clock);
-static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
u8 pwr = 0;
@@ -1272,6 +1338,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
if (!IS_ERR(mmc->supply.vmmc)) {
spin_unlock_irq(&host->lock);
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (mmc->caps & MMC_CAP_UHS2 &&
+ !IS_ERR(mmc->supply.vmmc2))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, vdd2);
spin_lock_irq(&host->lock);
return;
}
@@ -1294,6 +1363,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
}
}
+ if (vdd2 != (unsigned short)-1) {
+ switch (1 << vdd2) {
+ case MMC_VDD2_165_195:
+ pwr |= SDHCI_VDD2_POWER_180;
+ break;
+ default:
+ BUG();
+ }
+ }
+
if (host->pwr == pwr)
return;
@@ -1321,6 +1400,8 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
pwr |= SDHCI_POWER_ON;
+ if (vdd2 != (unsigned short)-1)
+ pwr |= SDHCI_VDD2_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
@@ -1335,6 +1416,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
mdelay(10);
}
}
+EXPORT_SYMBOL_GPL(sdhci_set_power);
/*****************************************************************************\
* *
@@ -1488,6 +1570,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
{
unsigned long flags;
u8 ctrl;
+ u16 ctrl_2;
struct mmc_host *mmc = host->mmc;
spin_lock_irqsave(&host->lock, flags);
@@ -1497,6 +1580,10 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
if (!IS_ERR(mmc->supply.vmmc) &&
ios->power_mode == MMC_POWER_OFF)
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ if (host->mmc->caps & MMC_CAP_UHS2 &&
+ !IS_ERR(mmc->supply.vmmc2) &&
+ ios->power_mode == MMC_POWER_OFF)
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
return;
}
@@ -1531,7 +1618,28 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
}
}
- sdhci_set_power(host, ios->power_mode, ios->vdd);
+ sdhci_set_power(host, ios->power_mode, ios->vdd, -1);
+
+ /* 4.0 host support */
+ if (host->version >= SDHCI_SPEC_400) {
+ /* Host Control 2 register */
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl_2 |= SDHCI_CTRL_HOST_4_EN;
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ ctrl_2 |= SDHCI_CTRL_ADDRESS_64_BIT;
+ /* TODO: shall we enable 26bit ADMA data length mode? */
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+
+ /* UHS2 Support */
+ if (host->mmc->flags & MMC_UHS2_SUPPORT &&
+ host->mmc->caps & MMC_CAP_UHS2 &&
+ host->mmc->ocr_avail_uhs2 & MMC_VDD2_165_195) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_uhs2_do_set_ios(host, ios);
+ spin_lock_irqsave(&host->lock, flags);
+ goto out;
+ }
+ }
if (host->ops->platform_send_init_74_clocks)
host->ops->platform_send_init_74_clocks(host, ios->power_mode);
@@ -1548,7 +1656,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
ctrl &= ~SDHCI_CTRL_HISPD;
if (host->version >= SDHCI_SPEC_300) {
- u16 clk, ctrl_2;
+ u16 clk;
/* In case of UHS-I modes, set High Speed Enable */
if ((ios->timing == MMC_TIMING_MMC_HS400) ||
@@ -1628,6 +1736,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+out:
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
}
@@ -1776,8 +1885,12 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
/*
* Signal Voltage Switching is only applicable for Host Controllers
* v3.00 and above.
+ * But for UHS2, the signal voltage is supplied by vdd2 which is
+ * already 1.8v so no voltage siwtch required.
*/
- if (host->version < SDHCI_SPEC_300)
+ if (host->version < SDHCI_SPEC_300 ||
+ (host->version >= SDHCI_SPEC_400 &&
+ host->flags & SDHCI_USE_UHS2))
return 0;
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
@@ -2077,7 +2190,7 @@ out:
}
-static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
+void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
{
/* Host Controller v3.00 defines preset value registers */
if (host->version < SDHCI_SPEC_300)
@@ -2105,6 +2218,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
host->preset_enabled = enable;
}
}
+EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
static void sdhci_card_event(struct mmc_host *mmc)
{
@@ -2124,8 +2238,11 @@ static void sdhci_card_event(struct mmc_host *mmc)
pr_err("%s: Resetting controller.\n",
mmc_hostname(host->mmc));
- sdhci_do_reset(host, SDHCI_RESET_CMD);
- sdhci_do_reset(host, SDHCI_RESET_DATA);
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED)
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
+ else
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
@@ -2134,6 +2251,30 @@ static void sdhci_card_event(struct mmc_host *mmc)
spin_unlock_irqrestore(&host->lock, flags);
}
+static int sdhci_uhs2_detect_init(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+
+ sdhci_runtime_pm_get(host);
+ ret = sdhci_uhs2_do_detect_init(host);
+ sdhci_runtime_pm_put(host);
+
+ return ret;
+}
+
+static int sdhci_uhs2_set_reg(struct mmc_host *mmc, enum uhs2_act act)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+
+ sdhci_runtime_pm_get(host);
+ ret = sdhci_uhs2_do_set_reg(host, act);
+ sdhci_runtime_pm_put(host);
+
+ return ret;
+}
+
static const struct mmc_host_ops sdhci_ops = {
.request = sdhci_request,
.set_ios = sdhci_set_ios,
@@ -2145,6 +2286,8 @@ static const struct mmc_host_ops sdhci_ops = {
.execute_tuning = sdhci_execute_tuning,
.card_event = sdhci_card_event,
.card_busy = sdhci_card_busy,
+ .uhs2_detect_init = sdhci_uhs2_detect_init,
+ .uhs2_set_reg = sdhci_uhs2_set_reg,
};
/*****************************************************************************\
@@ -2192,10 +2335,14 @@ static void sdhci_tasklet_finish(unsigned long param)
/* This is to force an update */
host->ops->set_clock(host, host->clock);
- /* Spec says we should do both at the same time, but Ricoh
- controllers do not like that. */
- sdhci_do_reset(host, SDHCI_RESET_CMD);
- sdhci_do_reset(host, SDHCI_RESET_DATA);
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED)
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
+ else {
+ /* Spec says we should do both at the same time, but
+ Ricoh controllers do not like that. */
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
+ }
}
host->mrq = NULL;
@@ -2496,6 +2643,11 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
DBG("*** %s got interrupt: 0x%08x\n",
mmc_hostname(host->mmc), intmask);
+ if (intmask & SDHCI_INT_ERROR &&
+ host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_irq(host);
+ }
+
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT;
@@ -2717,13 +2869,14 @@ static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
pm_runtime_get_noresume(host->mmc->parent);
}
-static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
{
if (host->runtime_suspended || !host->bus_on)
return;
host->bus_on = false;
pm_runtime_put_noidle(host->mmc->parent);
}
+EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_off);
int sdhci_runtime_suspend_host(struct sdhci_host *host)
{
@@ -2847,12 +3000,13 @@ int sdhci_add_host(struct sdhci_host *host)
override_timeout_clk = host->timeout_clk;
+ /* TODO: shall I reset UHS2 here? */
sdhci_do_reset(host, SDHCI_RESET_ALL);
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
- if (host->version > SDHCI_SPEC_300) {
+ if (host->version > SDHCI_SPEC_410) {
pr_err("%s: Unknown controller version (%d). "
"You may experience problems.\n", mmc_hostname(mmc),
host->version);
@@ -2866,6 +3020,13 @@ int sdhci_add_host(struct sdhci_host *host)
host->caps1 :
sdhci_readl(host, SDHCI_CAPABILITIES_1);
+ if (host->version >= SDHCI_SPEC_400) {
+ if (caps[1] & SDHCI_SUPPORT_UHS2) {
+ mmc->caps |= MMC_CAP_UHS2;
+ mmc->flags |= MMC_UHS2_SUPPORT;
+ }
+ }
+
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
@@ -3302,6 +3463,9 @@ int sdhci_add_host(struct sdhci_host *host)
*/
mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
+ if (host->version >= SDHCI_SPEC_400)
+ sdhci_uhs2_add_host(host, caps[1]);
+
/*
* Init tasklets.
*/
@@ -3365,6 +3529,8 @@ int sdhci_add_host(struct sdhci_host *host)
#ifdef SDHCI_USE_LEDS_CLASS
reset:
+ /* TODO: shall I reset UHS2 and clear UHS2 irq here? */
+ sdhci_uhs2_remove_host(host, 0);
sdhci_do_reset(host, SDHCI_RESET_ALL);
sdhci_writel(host, 0, SDHCI_INT_ENABLE);
sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
@@ -3407,8 +3573,11 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
led_classdev_unregister(&host->led);
#endif
- if (!dead)
+ sdhci_uhs2_remove_host(host, dead);
+
+ if (!dead) {
sdhci_do_reset(host, SDHCI_RESET_ALL);
+ }
sdhci_writel(host, 0, SDHCI_INT_ENABLE);
sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
@@ -4,6 +4,7 @@
* Header file for Host Controller registers and I/O accessors.
*
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,13 +25,18 @@
* Controller registers
*/
-#define SDHCI_DMA_ADDRESS 0x00
+#define SDHCI_DMA_ADDRESS 0x00 /* Host version less than 4.0 */
#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
+/*
+ * 32bit Block Count register is only selected when Host Version Enable
+ * is set to 4 and 16bit Block Count register is set to zero.
+ */
+#define SDHCI_32B_BLOCK_COUNT SDHCI_DMA_ADDRESS /* Host version is 4.0 */
#define SDHCI_BLOCK_SIZE 0x04
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
-#define SDHCI_BLOCK_COUNT 0x06
+#define SDHCI_BLOCK_COUNT 0x06 /* 16bit Block Count */
#define SDHCI_ARGUMENT 0x08
@@ -39,11 +45,34 @@
#define SDHCI_TRNS_BLK_CNT_EN 0x02
#define SDHCI_TRNS_AUTO_CMD12 0x04
#define SDHCI_TRNS_AUTO_CMD23 0x08
+/*
+ * Since Version 4.10, use of Auto CMD Auto Select is recommended rather
+ * than use of Auto CMD12 Enable or Auto CMD23 Enable.
+ * Selection of Auto CMD depends on setting of CMD23 Enable in the Host
+ * Control 2 register.
+ */
+#define SDHCI_TRNS_AUTO_CMD_AUTO_SEL 0x0C
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
+/*
+ * Defined in Host Version 4.10.
+ * 1 - R5 (SDIO)
+ * 0 - R1 (Memory)
+ */
+#define SDHCI_TRNS_RES_TYPE 0x40
+#define SDHCI_TRNS_RES_ERR_CHECK 0x80
+#define SDHCI_TRNS_RES_INT_DIS 0x0100
#define SDHCI_COMMAND 0x0E
#define SDHCI_CMD_RESP_MASK 0x03
+/*
+ * Host Version 4.10 adds this bit to distinguish a main command or
+ * sub command.
+ * CMD53(SDIO) - main command
+ * CMD52(SDIO) - sub command which doesn't have data block or doesn't
+ * indicate busy.
+ */
+#define SDHCI_CMD_SUB_CMD 0x04
#define SDHCI_CMD_CRC 0x08
#define SDHCI_CMD_INDEX 0x10
#define SDHCI_CMD_DATA 0x20
@@ -58,12 +87,17 @@
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
#define SDHCI_RESPONSE 0x10
+#define SDHCI_RESPONSE_CM_TRAN_ABORT_OFFSET 0x10
+#define SDHCI_RESPONSE_CM_TRAN_ABORT_SIZE 4
+#define SDHCI_RESPONSE_SD_TRAN_ABORT_OFFSET 0x18
+#define SDHCI_RESPONSE_SD_TRAN_ABORT_SIZE 8
#define SDHCI_BUFFER 0x20
#define SDHCI_PRESENT_STATE 0x24
#define SDHCI_CMD_INHIBIT 0x00000001
#define SDHCI_DATA_INHIBIT 0x00000002
+#define SDHCI_DATA_HIGH_LVL_MASK 0x000000F0
#define SDHCI_DOING_WRITE 0x00000100
#define SDHCI_DOING_READ 0x00000200
#define SDHCI_SPACE_AVAILABLE 0x00000400
@@ -73,6 +107,12 @@
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
#define SDHCI_DATA_0_LVL_MASK 0x00100000
+#define SDHCI_HOST_REGULATOR_STABLE 0x02000000
+#define SDHCI_CMD_NOT_ISSUE_ERR 0x08000000
+#define SDHCI_SUB_CMD_STATUS 0x10000000
+#define SDHCI_UHS2_IN_DORMANT_STATE 0x20000000
+#define SDHCI_UHS2_LANE_SYNC 0x40000000
+#define SDHCI_UHS2_IF_DETECT 0x80000000
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
@@ -90,6 +130,10 @@
#define SDHCI_POWER_180 0x0A
#define SDHCI_POWER_300 0x0C
#define SDHCI_POWER_330 0x0E
+/* VDD2 - UHS2 */
+#define SDHCI_VDD2_POWER_ON 0x10
+#define SDHCI_VDD2_POWER_180 0xA0
+#define SDHCI_VDD2_POWER_120 0x80
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
@@ -105,6 +149,7 @@
#define SDHCI_DIV_MASK_LEN 8
#define SDHCI_DIV_HI_MASK 0x300
#define SDHCI_PROG_CLOCK_MODE 0x0020
+#define SDHCI_PLL_EN 0x0008
#define SDHCI_CLOCK_CARD_EN 0x0004
#define SDHCI_CLOCK_INT_STABLE 0x0002
#define SDHCI_CLOCK_INT_EN 0x0001
@@ -128,6 +173,8 @@
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
+/* Host Version 4.10 */
+#define SDHCI_INT_FX_EVENT 0x00002000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
#define SDHCI_INT_CRC 0x00020000
@@ -139,6 +186,8 @@
#define SDHCI_INT_BUS_POWER 0x00800000
#define SDHCI_INT_ACMD12ERR 0x01000000
#define SDHCI_INT_ADMA_ERROR 0x02000000
+/* Host Version 4.0 */
+#define SDHCI_INT_RESPONSE_ERROR 0x08000000
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
@@ -153,6 +202,8 @@
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
+/* Host Version 4.10 */
+#define SDHCI_ACMD_RESPONSE_ERROR 0x0020
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_UHS_MASK 0x0007
@@ -162,14 +213,23 @@
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
-#define SDHCI_CTRL_VDD_180 0x0008
-#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
+/* UHS2 */
+#define SDHCI_CTRL_UHS_2 0x0007
+#define SDHCI_CTRL_VDD_180 0x0008 /* UHS-I only */
+#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 /* UHS-I only */
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
#define SDHCI_CTRL_DRV_TYPE_A 0x0010
#define SDHCI_CTRL_DRV_TYPE_C 0x0020
#define SDHCI_CTRL_DRV_TYPE_D 0x0030
-#define SDHCI_CTRL_EXEC_TUNING 0x0040
-#define SDHCI_CTRL_TUNED_CLK 0x0080
+#define SDHCI_CTRL_EXEC_TUNING 0x0040 /* UHS-I only */
+#define SDHCI_CTRL_TUNED_CLK 0x0080 /* UHS-I only */
+/* UHS2 */
+#define SDHCI_CTRL_UHS2_INTERFACE_EN 0x0100
+#define SDHCI_CTRL_ADMA2_LEN_MODE 0x0400
+#define SDHCI_CTRL_CMD23_EN 0x0800
+#define SDHCI_CTRL_HOST_4_EN 0x1000
+#define SDHCI_CTRL_ADDRESS_64_BIT 0x2000
+#define SDHCI_CTRL_ASYNC_INT_EN 0x4000
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
@@ -189,7 +249,10 @@
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
+/* Host Version 4.10 */
+#define SDHCI_CAN_64BIT_V4 0x08000000
#define SDHCI_CAN_64BIT 0x10000000
+#define SDHCI_CAN_ASYNC_INT 0x20000000
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
@@ -204,11 +267,17 @@
#define SDHCI_RETUNING_MODE_SHIFT 14
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
#define SDHCI_CLOCK_MUL_SHIFT 16
+/* UHS2 */
+#define SDHCI_SUPPORT_VDD2_180 0x10000000
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_CAPABILITIES_1 0x44
+/* UHS2 */
+#define SDHCI_SUPPORT_UHS2 0x00000008
+#define SDHCI_CAN_DO_ADMA3 0x08000000
#define SDHCI_MAX_CURRENT 0x48
+#define SDHCI_MAX_CURRENT_1 0x4C
#define SDHCI_MAX_CURRENT_LIMIT 0xFF
#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
#define SDHCI_MAX_CURRENT_330_SHIFT 0
@@ -216,12 +285,19 @@
#define SDHCI_MAX_CURRENT_300_SHIFT 8
#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
#define SDHCI_MAX_CURRENT_180_SHIFT 16
+/* UHS2 */
+#define SDHCI_MAX_CURRENT_VDD2_180_MASK 0x0000000FF
#define SDHCI_MAX_CURRENT_MULTIPLIER 4
/* 4C-4F reserved for more max current */
#define SDHCI_SET_ACMD12_ERROR 0x50
+/* Host Version 4.10 */
+#define SDHCI_SET_ACMD_RESPONSE_ERROR 0x20
#define SDHCI_SET_INT_ERROR 0x52
+/* Host Version 4.10 */
+#define SDHCI_SET_INT_TUNING_ERROR 0x0400
+#define SDHCI_SET_INT_RESPONSE_ERROR 0x0800
#define SDHCI_ADMA_ERROR 0x54
@@ -237,7 +313,10 @@
#define SDHCI_PRESET_FOR_SDR50 0x6A
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
+/* TODO: 0x74 is used for UHS2 in 4.10. How about HS400? */
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
+/* UHS2 */
+#define SDHCI_PRESET_FOR_UHS2 0x74
#define SDHCI_PRESET_DRV_MASK 0xC000
#define SDHCI_PRESET_DRV_SHIFT 14
#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
@@ -245,6 +324,219 @@
#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
+#define SDHCI_ADMA3_ADDRESS 0x78
+
+/* UHS-II */
+#define SDHCI_UHS2_BLOCK_SIZE 0x80
+#define SDHCI_UHS2_MAKE_BLKSZ(dma, blksz) \
+ (((dma & 0x7) << 12) | (blksz & 0xFFF))
+
+#define SDHCI_UHS2_BLOCK_COUNT 0x84
+
+#define SDHCI_UHS2_CMD_PACKET 0x88
+#define SDHCI_UHS2_CMD_PACK_MAX_LEN 20
+
+#define SDHCI_UHS2_TRANS_MODE 0x9C
+#define SDHCI_UHS2_TRNS_DMA 0x0001
+#define SDHCI_UHS2_TRNS_BLK_CNT_EN 0x0002
+#define SDHCI_UHS2_TRNS_DATA_TRNS_WRT 0x0010
+#define SDHCI_UHS2_TRNS_BLK_BYTE_MODE 0x0020
+#define SDHCI_UHS2_TRNS_RES_R5 0x0040
+#define SDHCI_UHS2_TRNS_RES_ERR_CHECK_EN 0x0080
+#define SDHCI_UHS2_TRNS_RES_INT_DIS 0x0100
+#define SDHCI_UHS2_TRNS_WAIT_EBSY 0x4000
+#define SDHCI_UHS2_TRNS_2L_HD 0x8000
+
+#define SDHCI_UHS2_COMMAND 0x9E
+#define SDHCI_UHS2_COMMAND_SUB_CMD 0x0004
+#define SDHCI_UHS2_COMMAND_DATA 0x0020
+#define SDHCI_UHS2_COMMAND_TRNS_ABORT 0x0040
+#define SDHCI_UHS2_COMMAND_CMD12 0x0080
+#define SDHCI_UHS2_COMMAND_DORMANT 0x00C0
+#define SDHCI_UHS2_COMMAND_PACK_LEN_MASK 0x1F00
+#define SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT 8
+
+#define SDHCI_UHS2_RESPONSE 0xA0
+#define SDHCI_UHS2_RESPONSE_MAX_LEN 20
+
+#define SDHCI_UHS2_MSG_SELECT 0xB4
+#define SDHCI_UHS2_MSG_SELECT_CURR 0x0
+#define SDHCI_UHS2_MSG_SELECT_ONE 0x1
+#define SDHCI_UHS2_MSG_SELECT_TWO 0x2
+#define SDHCI_UHS2_MSG_SELECT_THREE 0x3
+
+#define SDHCI_UHS2_MSG 0xB8
+
+#define SDHCI_UHS2_DEV_INT_STATUS 0xBC
+
+#define SDHCI_UHS2_DEV_SELECT 0xBE
+#define SDHCI_UHS2_DEV_SELECT_DEV_SEL_MASK 0x0F
+#define SDHCI_UHS2_DEV_SELECT_INT_MSG_EN 0x80
+
+#define SDHCI_UHS2_DEV_INT_CODE 0xBF
+
+#define SDHCI_UHS2_SW_RESET 0xC0
+#define SDHCI_UHS2_SW_RESET_FULL 0x0001
+#define SDHCI_UHS2_SW_RESET_SD 0x0002
+
+#define SDHCI_UHS2_TIMER_CTRL 0xC2
+#define SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT 4
+
+#define SDHCI_UHS2_ERR_INT_STATUS 0xC4
+#define SDHCI_UHS2_ERR_INT_STATUS_EN 0xC8
+#define SDHCI_UHS2_ERR_INT_SIG_EN 0xCC
+#define SDHCI_UHS2_ERR_INT_STATUS_HEADER 0x00000001
+#define SDHCI_UHS2_ERR_INT_STATUS_RES 0x00000002
+#define SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP 0x00000004
+#define SDHCI_UHS2_ERR_INT_STATUS_CRC 0x00000008
+#define SDHCI_UHS2_ERR_INT_STATUS_FRAME 0x00000010
+#define SDHCI_UHS2_ERR_INT_STATUS_TID 0x00000020
+#define SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER 0x00000080
+#define SDHCI_UHS2_ERR_INT_STATUS_EBUSY 0x00000100
+#define SDHCI_UHS2_ERR_INT_STATUS_ADMA 0x00008000
+#define SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT 0x00010000
+#define SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT 0x00020000
+#define SDHCI_UHS2_ERR_INT_STATUS_VENDOR 0x08000000
+#define SDHCI_UHS2_ERR_INT_STATUS_MASK \
+ (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES | \
+ SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \
+ SDHCI_UHS2_ERR_INT_STATUS_CRC | \
+ SDHCI_UHS2_ERR_INT_STATUS_FRAME | \
+ SDHCI_UHS2_ERR_INT_STATUS_TID | \
+ SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \
+ SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \
+ SDHCI_UHS2_ERR_INT_STATUS_ADMA | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT | \
+ SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT)
+#define SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK \
+ (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES | \
+ SDHCI_UHS2_ERR_INT_STATUS_FRAME | \
+ SDHCI_UHS2_ERR_INT_STATUS_TID | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT)
+/* TODO: CRC is for data or cmd? */
+#define SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK \
+ (SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \
+ SDHCI_UHS2_ERR_INT_STATUS_CRC | \
+ SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \
+ SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \
+ SDHCI_UHS2_ERR_INT_STATUS_ADMA | \
+ SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT)
+
+#define SDHCI_UHS2_SET_PTR 0xE0
+#define SDHCI_UHS2_GEN_SET (SDHCI_UHS2_SET_PTR + 0)
+#define SDHCI_UHS2_GEN_SET_POWER_LOW 0x0001
+#define SDHCI_UHS2_GEN_SET_N_LANES_POS 8
+#define SDHCI_UHS2_GEN_SET_2L_FD_HD 0x0
+#define SDHCI_UHS2_GEN_SET_2D1U_FD 0x2
+#define SDHCI_UHS2_GEN_SET_1D2U_FD 0x3
+#define SDHCI_UHS2_GEN_SET_2D2U_FD 0x4
+
+#define SDHCI_UHS2_PHY_SET (SDHCI_UHS2_SET_PTR + 4)
+#define SDHCI_UHS2_PHY_SET_SPEED_POS 6
+#define SDHCI_UHS2_PHY_SET_HIBER_EN 0x00008000
+#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_MASK 0x000F0000
+#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS 16
+#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_MASK 0x00F00000
+#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS 20
+
+#define SDHCI_UHS2_TRAN_SET (SDHCI_UHS2_SET_PTR + 8)
+#define SDHCI_UHS2_TRAN_SET_N_FCU_MASK 0x0000FF00
+#define SDHCI_UHS2_TRAN_SET_N_FCU_POS 8
+#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_MASK 0x00030000
+#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS 16
+
+#define SDHCI_UHS2_TRAN_SET_1 (SDHCI_UHS2_SET_PTR + 12)
+#define SDHCI_UHS2_TRAN_SET_1_N_DAT_GAP_MASK 0x000000FF
+
+#define SDHCI_UHS2_HOST_CAPS_PTR 0xE2
+#define SDHCI_UHS2_HOST_CAPS_GEN_OFFSET 0
+#define SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK 0x0000000F
+#define SDHCI_UHS2_HOST_CAPS_GEN_DAP(dap) ({ \
+ if (dap == 0) \
+ return 360; \
+ else \
+ return dap * 360; })
+#define SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK 0x000000F0
+#define SDHCI_UHS2_HOST_CAPS_GEN_GAP(gap) (gap * 360)
+#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK 0x00003F00
+#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT 8
+#define SDHCI_UHS2_HOST_CAPS_GEN_2L_HD_FD 1
+#define SDHCI_UHS2_HOST_CAPS_GEN_2D1U_FD 2
+#define SDHCI_UHS2_HOST_CAPS_GEN_1D2U_FD 4
+#define SDHCI_UHS2_HOST_CAPS_GEN_2D2U_FD 8
+#define SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64 0x00004000
+#define SDHCI_UHS2_HOST_CAPS_GEN_BOOT 0x00008000
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK 0x00030000
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT 16
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_RMV 0
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB 1
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB_RMV 2
+#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_MASK 0x003C0000
+#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_SHIFT 18
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_MASK 0x00C00000
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_SHIFT 22
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_P2P 0
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_RING 1
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB 2
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB_RING 3
+
+#define SDHCI_UHS2_HOST_CAPS_PHY_OFFSET 4
+#define SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK 0x0000003F
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK 0x000000C0
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT 6
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_A 0
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_B 1
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK 0x000F0000
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT 16
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN(n_lss) ({ \
+ if (n_lss == 0) \
+ return 16 * 4; \
+ else \
+ return n_lss * 4; })
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK 0x00F00000
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT 20
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR(n_lss) ({ \
+ if (n_lss == 0) \
+ return 16 * 8; \
+ else \
+ return n_lss * 8; })
+
+#define SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET 8
+#define SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK 0x0000003F
+#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK 0x0000FF00
+#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT 8
+#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU(n_fcu) ({ \
+ if (n_fcu == 0) \
+ return 256; \
+ else \
+ return n_fcu; })
+#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK 0x00070000
+#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT 16
+#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK 0xFFF00000
+#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT 20
+
+#define SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET 12
+#define SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK 0x000000FF
+
+#define SDHCI_UHS2_TEST_PTR 0xE4
+#define SDHCI_UHS2_TEST_ERR_HEADER 0x00000001
+#define SDHCI_UHS2_TEST_ERR_RES 0x00000002
+#define SDHCI_UHS2_TEST_ERR_RETRY_EXP 0x00000004
+#define SDHCI_UHS2_TEST_ERR_CRC 0x00000008
+#define SDHCI_UHS2_TEST_ERR_FRAME 0x00000010
+#define SDHCI_UHS2_TEST_ERR_TID 0x00000020
+#define SDHCI_UHS2_TEST_ERR_UNRECOVER 0x00000080
+#define SDHCI_UHS2_TEST_ERR_EBUSY 0x00000100
+#define SDHCI_UHS2_TEST_ERR_ADMA 0x00008000
+#define SDHCI_UHS2_TEST_ERR_RES_TIMEOUT 0x00010000
+#define SDHCI_UHS2_TEST_ERR_DEADLOCK_TIMEOUT 0x00020000
+#define SDHCI_UHS2_TEST_ERR_VENDOR 0x08000000
+
+#define SDHCI_UHS2_EMBED_CTRL 0xE6
+#define SDHCI_UHS2_VENDOR 0xE8
+
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
@@ -255,6 +547,8 @@
#define SDHCI_SPEC_100 0
#define SDHCI_SPEC_200 1
#define SDHCI_SPEC_300 2
+#define SDHCI_SPEC_400 3
+#define SDHCI_SPEC_410 4
/*
* End of controller registers.
@@ -458,4 +752,11 @@ extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
extern int sdhci_runtime_resume_host(struct sdhci_host *host);
#endif
+/* sdhci_uhs2.c needed */
+extern void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+extern void sdhci_dumpregs(struct sdhci_host *host);
+extern void sdhci_finish_data(struct sdhci_host *);
+extern void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd, unsigned short vdd2);
+extern void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
#endif /* __SDHCI_HW_H */
@@ -2,6 +2,7 @@
* linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
*
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -137,6 +138,7 @@ struct sdhci_host {
#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
+#define SDHCI_USE_UHS2 (1<<13) /* Support UHS2 */
unsigned int version; /* SDHCI spec. version */
This patch adds the UHS-II support in host layer. This is a RFC patch for community review. Signed-off-by: Yi Sun <yi.y.sun@intel.com> --- drivers/mmc/host/Makefile | 2 +- drivers/mmc/host/sdhci-pci.c | 6 + drivers/mmc/host/sdhci-uhs2.c | 703 +++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 36 +++ drivers/mmc/host/sdhci.c | 259 ++++++++++++--- drivers/mmc/host/sdhci.h | 313 +++++++++++++++++- include/linux/mmc/sdhci.h | 2 + 7 files changed, 1269 insertions(+), 52 deletions(-) create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h